aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-12-01skge version 1.13Stephen Hemminger
Version for 2.6.24 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge: increase TX threshold for JumboStephen Hemminger
Need to increase TX threshold when doing Jumbo frames on dual port board to avoid underruns. (Code from sk98lin). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge: fiber link up/down fixStephen Hemminger
The driver would not work over fibre if other end when down then came back up (would require reloading driver). The correct way to manage the link the same way for both TP and fibre. Resloves problem described in: http://lkml.org/lkml/2007/11/6/395 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge: retry on MAC shutdownStephen Hemminger
Make sure and retry when shutting down the MAC. This code is copied from sk98lin driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge: receive flush logicStephen Hemminger
Receive FIFO overrun is not catastrophic condition, so don't flush when it happens. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01skge: FIFO Ram calculation errorStephen Hemminger
The calculation of usable FIFO RAM is wrong in the skge driver. First, is doesn't take into account the reserved area on the original SysKonnect Genesis boards. Second it has an off-by-one error because hw->ports is either 1 or 2. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01ctc: make use of alloc_netdev()Peter Tiedemann
Currently ctc-device initialization is broken (kernel bug in ctc_new_device). The new network namespace code reveals a deficiency of the ctc driver. It should make use of alloc_netdev() as described in Documentation/networking/netdevices.txt. Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01S2io: Fixed the case when the card initialization fails on mtu changeSreenivasa Honnur
Fix the case when the card initialization fails on a mtu change and then close is called (due to ifdown), which frees non existent rx buffers. - Returning appropriate error codes in init_nic function. - In s2io_close function s2io_card_down is called only when device is up. - In s2io_change_mtu function return value of s2io_card_up function is checked and returned if it failed. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-01Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-12-01Merge branch 'master' into upstream-fixesJeff Garzik
2007-11-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Fix static rate if path faster than link IPoIB: Fix oops if xmit is called when priv->broadcast is NULL
2007-11-30Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix build. [MIPS] Fix use of smp_processor_id() in preemptible code.
2007-12-01[MIPS] Fix build.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-12-01[MIPS] Fix use of smp_processor_id() in preemptible code.Pavel Kiryukhin
Freeing prom memory: 956kb freed Freeing firmware memory: 978944k freed Freeing unused kernel memory: 180k freed BUG: using smp_processor_id() in preemptible [00000000] code: swapper/1 caller is r4k_dma_cache_wback_inv+0x144/0x2a0 Call Trace: [<80117af8>] r4k_dma_cache_wback_inv+0x144/0x2a0 [<802e4b84>] debug_smp_processor_id+0xd4/0xf0 [<802e4b7c>] debug_smp_processor_id+0xcc/0xf0 ... CONFIG_DEBUG_PREEMPT is enabled. -- Bug cause is blast_dcache_range() in preemptible code [in r4k_dma_cache_wback_inv()]. blast_dcache_range() is constructed via __BUILD_BLAST_CACHE_RANGE that uses cpu_dcache_line_size(). It uses current_cpu_data that use smp_processor_id() in turn. In case of CONFIG_DEBUG_PREEMPT smp_processor_id emits BUG if we are executing with preemption enabled. Cpu options of cpu0 are assumed to be the superset of all processors. Can I make the same assumptions for cache line size and fix this issue the following way: Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-30IB/ehca: Fix static rate if path faster than linkJoachim Fenkes
The formula would yield -1 if the path is faster than the link, which is wrong in a bad way (max throttling). Clamp to 0, which is the correct value. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-30Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4680/1: parentheses around NR_IRQS definition [ARM] 4679/1: AT91: Change maintainer email address [ARM] 4675/1: pxa: fix mfp address definition error for pxa320 [ARM] 4674/1: pxa: increase LCD PCLK drive strength to fast 2mA for PXA300/PXA310 [ARM] 4673/1: pxa: add missing IRQ_SSP4 definitions for PXA3xx [ARM] 4672/1: pxa: fix DRCMR(n) to support PXA27x and later processors [ARM] 4665/1: fix __und_usr wrt accessing the undefined insn in user space [ARM] 4659/1: remove possibilities for spurious false negative with __kuser_cmpxchg [ARM] 4661/1: fix do_undefinstr wrt the enabling of IRQs [ARM] uengine: fix memset size error [ARM] 4648/1: i.MX/MX1 ensure more complete AITC initialization [ARM] 4611/2: AT91: Fix GPIO buttons pins on SAM9261-EK. [ARM] 4650/1: AT91: New-style init of I2C, support for i2c-gpio [ARM] 4604/2: AT91: Master clock divistor on SAM9 [ARM] 4662/1: Fix PXA serial driver compilation if SERIAL_PXA_CONSOLE is disabled [ARM] PXA ssp: unlock when ssp tries to close an invalid port [ARM] 4654/1: pxa: update default MFP register value [ARM] 4653/1: pxa: fix a gpio typo in mfp-pxa320.h [ARM] 4652/1: pxa: fix a typo of pxa27x usb host clk definition [ARM] 4651/1: pxa: add PXA3xx specific IRQ definitions
2007-11-30Fix kmem_cache_free performance regression in slabMatthew Wilcox
The database performance group have found that half the cycles spent in kmem_cache_free are spent in this one call to BUG_ON. Moving it into the CONFIG_SLAB_DEBUG-only function cache_free_debugcheck() is a performance win of almost 0.5% on their particular benchmark. The call was added as part of commit ddc2e812d592457747c4367fb73edcaa8e1e49ff with the comment that "overhead should be minimal". It may have been minimal at the time, but it isn't now. [ Quoth Pekka Enberg: "I don't think the BUG_ON per se caused the performance regression but rather the virt_to_head_page() changes to virt_to_cache() that were added later." ] Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Pekka J Enberg <penberg@cs.helsinki.fi> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29iwlwifi 4965 Fix race conditional panic.Joonwoo Park
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29iwlwifi 3945 Fix race conditional panic.Joonwoo Park
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29iwlwifi: fix iwl_mac_add_interface handlerTomas Winkler
This patch fixes iwl_mac_add_interface. 1. Currently only one interface is supported, instead of silently retuning 0 now it returns -EOPNOTSUPP (By Johannes Berg) 2. It enables changing mac address from user space (By Ian Schram) Signed-off-by: Tomas Winkler <tomas@localhost.localdomain> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: linux-wireless <linux-wireless@vger.kernel.org Cc: Ian Schram <ischram@telenet.be> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29libertas: let more than one MAC event throughHolger Schurig
lbs_mac_event_disconnected() was called once and then never again upon a hardware MAC event. The reason was that the driver didn't clean the correct bit in the interrupt cause register of the chip. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29libertas: Don't set NETIF_F_IPV6_CSUM in dev->featuresDavid Woodhouse
I'm not sure why it was doing this, and I'm not sure I _want_ to know why. But calling it NETIF_F_DYNALLOC doesn't change the fact that the kernel believes it to be NETIF_F_IPV6_CSUM, and that IPv6 communication is hence buggered. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29drivers/net/wireless: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29b43/b43legacy: fix left-over URLs and ifdefsStefano Brivio
Fix some left-over URLs and ifdefs in b43 and b43legacy drivers. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29iwlwifi: fix possible NULL dereference in iwl_set_rate()Saleem Abdulrasool
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-11-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: x86 setup: don't recalculate ss:esp unless really necessary
2007-11-29Merge branches 'at91-fixes' and 'pxa-fixes'Russell King
2007-11-29[ARM] 4680/1: parentheses around NR_IRQS definitionRoel Kluin
If NR_IRQS is defined as a sum without surrounding parentheses, this may lead to problems when used in multiplications. This may lead to problems in: arch/ia64/sn/kernel/irq.c:516 arch/x86/kernel/io_apic_32.c:693, 694, 699, 700 fs/proc/proc_misc.c:464 Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-29[ARM] 4679/1: AT91: Change maintainer email addressAndrew Victor
Change email address of AT91 maintainer. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-29[ARM] 4675/1: pxa: fix mfp address definition error for pxa320eric miao
Signed-off-by: bridge wu <bridge.wu@marvell.com> Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-29[ARM] 4674/1: pxa: increase LCD PCLK drive strength to fast 2mA for ↵eric miao
PXA300/PXA310 Some platforms (e.g. Littleton) requires LCD PCLK drive strength to be higher than default to cope with the fast PCLK frequency. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-29[ARM] 4673/1: pxa: add missing IRQ_SSP4 definitions for PXA3xxeric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-29[ARM] 4672/1: pxa: fix DRCMR(n) to support PXA27x and later processorseric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdio_uart: fix sign of paramter status in sdio_uart_receive_chars()
2007-11-29sdio_uart: fix sign of paramter status in sdio_uart_receive_chars()Andre Haupt
This also fixes a sparse warning about different signedness. Only compile tested, because i do not have the hardware. Signed-off-by: Andre Haupt <andre@bitwigglers.org> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-11-29x86/paravirt: revert exports to restore old behaviourJeremy Fitzhardinge
Subdividing the paravirt_ops structure caused a regression in certain non-GPL modules which try to use mmu_ops and cpu_ops. This restores the old behaviour, and makes it consistent with the non-CONFIG_PARAVIRT case. Takashi Iwai <tiwai@suse.de> adds: > I took at this problem (as I have an nvidia card on one of my > workstations), and found out that the following suffer from > EXPORT_SYMBOL_GPL changes: > > * local_disable_irq(), local_irq_save*(), etc. > * MSR-related macros like rdmsr(), wrmsr(), read_cr0(), etc. > wbinvd(), too. > * pmd_val(), pgd_val(), etc are all involved with pv_mm_ops. > pmd_large() and pmd_bad() is also indirectly involved. > __flush_tlb() and friends suffer, too. Christoph Hellwig objects to this patch on the grounds that modules shouldn't be using these operations anyway. I don't think this is a particularly good reason to reject the patch, for several reasons: 1. These operations are still available to modules when not using CONFIG_PARAVIRT, since they are implicitly exported as inline functions via the kernel headers. Exporting the same functionality as GPL-only symbols just adds a gratuitious difference between CONFIG_PARAVIRT and non-CONFIG_PARAVIRT configurations. If we really think these operations are not for module use (or non-GPL module use), then we should solve the problem in a general way. 2. It's a regression from previous kernels, which would work these modules even with CONFIG_PARAVIRT enabled. 3. The operations in question seem pretty reasonable for modules to use. The control registers/MSRs can be accessed directly anyway, so there's no benefit in preventing modules from using standard interfaces. And it seems reasonable to allow a graphics driver to create its own mappings if it wants. Therefore, I think this patch should go in for 2.6.24. If people really think that these operations should not be available to modules, then we can address that separately. Signed-off-by: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com> Cc: Tobias Powalowski <t.powa@gmx.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29lguest: prevent VISWS or VOYAGER randconfigsRandy Dunlap
Keep lguest from being enabled on VISWS or VOYAGER configs, just as is already done for VMI and XEN. Otherwise randconfigs with VISWS and LGUEST have this problem: In file included from arch/x86/kernel/setup_32.c:61: include/asm-x86/mach-visws/setup_arch.h:8:1: warning: "ARCH_SETUP" redefined In file included from include/asm/msr.h:80, from include/asm/processor_32.h:17, from include/asm/processor.h:2, from include/asm/thread_info_32.h:16, from include/asm/thread_info.h:2, from include/linux/thread_info.h:21, from include/linux/preempt.h:9, from include/linux/spinlock.h:49, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/timex.h:57, from include/linux/sched.h:53, from arch/x86/kernel/setup_32.c:24: include/asm/paravirt.h:458:1: warning: this is the location of the previous definition (and of course, this happens because kconfig does not follow dependencies when [evil] select is used...) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29ACPI: avoid references to impossible processors.Christoph Lameter
ACPI uses NR_CPUS in various loops and in some it accesses per cpu data of processors that are not present(!) and that will never be present. The pointers to per cpu data are typically not initialized for processors that are not present. So we seem to be reading something here from offset 0 in memory. Make ACPI use nr_cpu_ids instead. That stops at the end of the possible processors. Convert one loop to NR_CPUS to use the cpu_possible map instead. That way ranges of processor that can never be brought online are skipped during the loop. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29tty: add the new termios2 ioctls to the compatible list.Heiko Carstens
Make them depend on TCGETS2. If that one is implemented the rest should be there as well. Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29wait_task_stopped(): pass correct exit_code to wait_noreap_copyout()Scott James Remnant
In wait_task_stopped() exit_code already contains the right value for the si_status member of siginfo, and this is simply set in the non WNOWAIT case. If you call waitid() with a stopped or traced process, you'll get the signal in siginfo.si_status as expected -- however if you call waitid(WNOWAIT) at the same time, you'll get the signal << 8 | 0x7f Pass it unchanged to wait_noreap_copyout(); we would only need to shift it and add 0x7f if we were returning it in the user status field and that isn't used for any function that permits WNOWAIT. Signed-off-by: Scott James Remnant <scott@ubuntu.com> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29add Mike Christie to MAINTAINERSMike Christie
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29FRV: arrange things such that BRA can reach from the trap tableDavid Howells
Arrange the sections in the FRV arch so that a BRA instruction with a 16-bit displacement can always reach from the trap table to entry.S, tlb-miss.S and break.S. The problem otherwise is that the linker can insert sufficient code between the slots in the trap table and the targets of the branch instructions in those slots that the displacement field in the instruction isn't sufficiently large. This is because the branch targets were in the .text section along with most of the other code in the kernel. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29FRV: fix the extern declaration of kallsyms_num_symsDavid Howells
Fix the extern declaration of kallsyms_num_syms to indicate that the symbol does not reside in the small-data storage space, and so may not be accessed relative to the small data base register. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29RTC: convert mutex to bitfieldJiri Kosina
RTC code is using mutex to assure exclusive access to /dev/rtc. This is however wrong usage, as it leaves the mutex locked when returning into userspace, which is unacceptable. Convert rtc->char_lock into bit operation. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix attribute caching after renameMiklos Szeredi
Invalidate attributes on rename, since some filesystems may update st_ctime. Reported by Szabolcs Szakacsits Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix uninitialized field in fuse_inodeJohn Muir
I found problems accessing (executing) previously existing files, until I did chmod on them (or setattr). If the fi->attr_version is not initialized, then it could be larger than fc->attr_version until a setattr is executed, and as a result the inode attributes would never be set. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix FUSE_FILE_OPS sendingMiklos Szeredi
FUSE_FILE_OPS is meant to signal that the kernel will send the open file to to the userspace filesystem for operations on open files, so that sillyrenaming unlinked files becomes unnecessary. However this needs VFS changes, which won't make it into 2.6.24. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: pass open flags to read and writeMiklos Szeredi
Some open flags (O_APPEND, O_DIRECT) can be changed with fcntl(F_SETFL, ...) after open, but fuse currently only sends the flags to userspace in open. To make it possible to correcly handle changing flags, send the current value to userspace in each read and write. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: cleanup: add fuse_get_attr_version()Miklos Szeredi
Extract repeated code into helper function, as suggested by Akpm. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix reading past EOFMiklos Szeredi
Currently reading a fuse file will stop at cached i_size and return EOF, even though the file might have grown since the attributes were last updated. So detect if trying to read past EOF, and refresh the attributes before continuing with the read. Thanks to mpb for the report. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 23:59:20 +0000