aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-11-26sched: fix prev_stime calculationIngo Molnar
Srivatsa Vaddagiri noticed occasionally incorrect CPU usage values in top and tracked it down to stime going below 0 in task_stime(). Negative values are possible there due to the sampled nature of stime/utime. Fix suggested by Balbir Singh. Signed-off-by: Ingo Molnar <mingo@elte.hu> Tested-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
2007-11-26sched: don't forget to unlock uids_mutex on error pathsPavel Emelyanov
The commit commit 5cb350baf580017da38199625b7365b1763d7180 Author: Dhaval Giani <dhaval@linux.vnet.ibm.com> Date: Mon Oct 15 17:00:14 2007 +0200 sched: group scheduling, sysfs tunables introduced the uids_mutex and the helpers to lock/unlock it. Unfortunately, the error paths of alloc_uid() were not patched to unlock it. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: Dhaval Giani <dhaval@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26x86: fix APIC related bootup crash on Athlon XP CPUsIngo Molnar
warmbloodedcreature@gmail.com reported that an APIC-enabled Asus a7v8x-x with an Athlon XP reboots early in the bootup: http://bugzilla.kernel.org/show_bug.cgi?id=8723 after a long marathon of spontaneous-reboot debugging, it turns out to be caused by sync_Arb_ids(). AMD CPUs never really needed this sequence anyway, so just return early if we meet an AMD CPU. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-26time: add ADJ_OFFSET_SS_READJohn Stultz
Michael Kerrisk reported that a long standing bug in the adjtimex() system call causes glibc's adjtime(3) function to deliver the wrong results if 'delta' is NULL. add the ADJ_OFFSET_SS_READ API detail, which will be used by glibc to fix this API compatibility bug. Also see: http://bugzilla.kernel.org/show_bug.cgi?id=6761 [ mingo@elte.hu: added patch description and made it backwards compatible ] NOTE: the new flag is defined 0xa001 so that it returns -EINVAL on older kernels - this way glibc can use it safely. Suggested by Ulrich Drepper. Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-26x86: export the symbol empty_zero_page on the 32-bit x86 architectureTheodore Ts'o
The latest KVM driver wants to use the empty_zero_page symbol, and it's not exported in 32-bit x86 (although it is exported by x86_64, s390, and uml architectures). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: tglx@linutronix.de Cc: linux-kernel@vger.kernel.com Cc: kvm-devel@lists.sourceforge.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26x86: fix kprobes_64.c inlining borkageAndrew Morton
fix: arch/x86/kernel/kprobes_64.c: In function 'set_current_kprobe': arch/x86/kernel/kprobes_64.c:152: sorry, unimplemented: inlining failed in call to 'is_IF_modifier': recursive inlining arch/x86/kernel/kprobes_64.c:166: sorry, unimplemented: called from here Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: mingo@elte.hu Cc: akpm@linux-foundation.org Cc: tglx@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26pci: use pci=bfsort for HP DL385 G2, DL585 G2Michal Schmidt
HP ProLiant systems DL385 G2 and DL585 G2 need pci=bfsort to enumerate PCI devices in the expected order. Matt sayeth: biosdevname is a userspace app I wrote to help solve this so we don't need to patch the kernel for future systems. It's not integrated into any distributions properly yet, but is included in openSUSE 10.3 and Fedora 8 for people who want to download and install it there. It acts as a udev helper. For the time being, patching the kernel is necessary. I really hope biosdevname eliminates that need in future distributions. http://linux.dell.com/biosdevname/ Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Cc: mingo@elte.hu Cc: andy@greyhouse.net Cc: john.cagle@hp.com Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: Greg KH <greg@kroah.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26x86: correctly set UTS_MACHINE for "make ARCH=x86"Andreas Herrmann
x86: correctly set UTS_MACHINE for "make ARCH=x86" For a kernel built with "make ARCH=x86" the following system information is displayed when running the new kernel $ uname -m x86 On some i386 systems (e.g. K7) we even have the following information $ uname -m x66 This is weird. The usual information for "uname -m" should be "x86_64" on 64-bit and "i386" or "i686" on 32-bit. This patch fixes the issue by setting UTS_MACHINE to "i386" for 32-bit kernel builds and to "x86_64" for 64-bit kernel builds. I.e., "x86" won't be used for UTS_MACHINE anymore. Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andreas Herrmann <aherrman@arcor.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@redhat.com>
2007-11-26lockdep: annotate do_debug() trap handlerPeter Zijlstra
Ensure the hardirq state is consistent before using locks. Use the rare trace_hardirqs_fixup() because the trap can happen in any context. resolves this rare lockdep warning: WARNING: at kernel/lockdep.c:2658 check_flags() [<c013571e>] check_flags+0x90/0x140 [<c0138a69>] lock_release+0x4b/0x1d0 [<c0507fea>] notifier_call_chain+0x2a/0x47 [<c050806b>] __atomic_notifier_call_chain+0x64/0x6d [<c0508007>] __atomic_notifier_call_chain+0x0/0x6d [<c050808b>] atomic_notifier_call_chain+0x17/0x1a [<c0131802>] notify_die+0x30/0x34 [<c0506b09>] do_debug+0x3e/0xd4 [<c050658f>] debug_stack_correct+0x27/0x2c [<c04be389>] tcp_rcv_established+0x1/0x620 [<c04c38c2>] tcp_v4_do_rcv+0x2b/0x313 [<c04c56b6>] tcp_v4_rcv+0x467/0x85d [<c0505ff2>] _spin_lock_nested+0x27/0x32 [<c04c5a4d>] tcp_v4_rcv+0x7fe/0x85d [<c04c560e>] tcp_v4_rcv+0x3bf/0x85d [<c04adbb5>] ip_local_deliver_finish+0x11b/0x1b0 [<c04adac8>] ip_local_deliver_finish+0x2e/0x1b0 [<c04ada7b>] ip_rcv_finish+0x27b/0x29a [<c04961e5>] netif_receive_skb+0xfb/0x2a6 [<c04add0f>] ip_rcv+0x0/0x1fb [<c0496354>] netif_receive_skb+0x26a/0x2a6 [<c04961e5>] netif_receive_skb+0xfb/0x2a6 [<c049872e>] process_backlog+0x7f/0xc6 [<c04983ba>] net_rx_action+0xb9/0x1ac [<c0498348>] net_rx_action+0x47/0x1ac [<c01376cb>] trace_hardirqs_on+0x118/0x16b [<c01225e2>] __do_softirq+0x49/0xa2 [<c010595f>] do_softirq+0x60/0xdd [<c0506300>] _spin_unlock_irq+0x20/0x2c [<c0103e4f>] restore_nocheck+0x12/0x15 [<c01440e1>] handle_fasteoi_irq+0x0/0x9b [<c0105a70>] do_IRQ+0x94/0xaa [<c0506300>] _spin_unlock_irq+0x20/0x2c [<c0104832>] common_interrupt+0x2e/0x34 [<c0114703>] native_safe_halt+0x2/0x3 [<c0102c01>] default_idle+0x44/0x65 [<c010257f>] cpu_idle+0x42/0x50 [<c076ea09>] start_kernel+0x26b/0x270 [<c076e317>] unknown_bootoption+0x0/0x196 ======================= irq event stamp: 559190 hardirqs last enabled at (559190): [<c0507316>] kprobe_exceptions_notify+0x299/0x305 hardirqs last disabled at (559189): [<c05067bf>] do_int3+0x1d/0x95 softirqs last enabled at (559172): [<c010595f>] do_softirq+0x60/0xdd softirqs last disabled at (559181): [<c010595f>] do_softirq+0x60/0xdd Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-26x86: turn off iommu merge by defaultIngo Molnar
revert this commit for now: commit 948062683004d13ca21c8c05ac052d387978a449 Author: Andi Kleen <ak@suse.de> Date: Fri Oct 19 20:35:03 2007 +0200 x86: enable iommu_merge by default it's causing regressions: http://bugzilla.kernel.org/show_bug.cgi?id=9412 Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-26x86: fix ACPI compile for LOCAL_APIC=nThomas Gleixner
ACPI processor idle code references local_apic_timer_c2_ok, which is not available when LOCAL_APIC is disabled. Define local_apic_timer_c2_ok as a constant, when LOCAL_APIC=n Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26x86: printk kernel version in WARN_ON and other dump_stack usersArjan van de Ven
today, all oopses contain a version number of the kernel, which is nice because the people who actually do bother to read the oops get this vital bit of information always without having to ask the reporter in another round trip. However, WARN_ON() and many other dump_stack() users right now lack this information; the patch below adds this. This information is essential for getting people to use their time effectively when looking at these things; in addition, it's essential for tools that try to collect statistics about defects. Please consider, since its so simple and important for long term kernel quality processes. The code is identical between 32/64 bit; a lot of this code should be unified over time, the patch keeps the identical-ness intact. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-26ACPI: Set max_cstate to 1 for early Opterons.Alexey Starikovskiy
AMD Opteron processors before CG revision don't like C-states > 1. This solves the long standing bugzilla #5303 and probably some more on affected machines: http://bugzilla.kernel.org/show_bug.cgi?id=5303 [ tglx@linutronix.de: reworked the patch so it does not wreck ia64 ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-11-26x86: fix NMI watchdog & 'stopped time' problemMaciej W. Rozycki
More than 3 years ago Niclas Gustafsson reported a 'stopped time' problem: > Watching the /proc/interrupts with 10s apart after the "stop". > > [root@s151 root]# more /proc/interrupts > CPU0 > 0: 66413955 local-APIC-edge timer [...] > LOC: 67355837 > ERR: 0 > MIS: 0 > [root@s151 root]# more /proc/interrupts > CPU0 > 0: 66413955 local-APIC-edge timer [...] > LOC: 67379568 > ERR: 0 > MIS: 0 This may be because buggy SMM firmware messes with the 8259A (configured for a transparent mode -- yes that rare "local-APIC-edge" mode is tricky ;-) ) insanely. this should resolve: http://bugzilla.kernel.org/show_bug.cgi?id=2544 http://bugzilla.kernel.org/show_bug.cgi?id=6296 Patch-dusted-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-11-26[MIPS] vpe: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26[MIPS] Compliment va_start() with va_end().Richard Knutsson
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26[MIPS] IP22: Fix broken eeprom access by using __raw_readl/__raw_writelThomas Bogendoerfer
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26[MIPS] IP22: Fix broken EISA interrupt setup by switching to generic i8259Thomas Bogendoerfer
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26[MIPS] 64-bit Sibyte kernels need DMA32.Ralf Baechle
Sibyte SOCs only have 32-bit PCI. Due to the sparse use of the address space only the first 1GB of memory is mapped at physical addresses below 1GB. If a system has more than 1GB of memory 32-bit DMA will not be able to reach all of it. For now this patch is good enough to keep Sibyte users happy but it seems eventually something like swiotlb will be needed for Sibyte. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26[MIPS] Only build r4k clocksource for systems that work ok with it.Ralf Baechle
In particular as-is it's not suited for multicore and mutiprocessors systems where there is on guarantee that the counter are synchronized or running from the same clock at all. This broke Sibyte and probably others since the "[MIPS] Handle R4000/R4400 mfc0 from count register." commit. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26[MIPS] Handle R4000/R4400 mfc0 from count register.Ralf Baechle
The R4000 and R4400 have an errata where if the cp0 count register is read in the exact moment when it matches the compare register no interrupt will be generated. This bug may be triggered if the cp0 count register is being used as clocksource and the compare interrupt as clockevent. So a simple workaround is to avoid using the compare for both facilities on the affected CPUs. This is different from the workaround suggested in the old errata documents; at some opportunity probably the official version should be implemented and tested. Another thing to find out is which processor versions exactly are affected. I only have errata documents upto R4400 V3.0 available so for the moment the code treats all R4000 and R4400 as broken. This is potencially a problem for some machines that have no other decent clocksource available; this workaround will cause them to fall back to another clocksource, worst case the "jiffies" source.
2007-11-26[MIPS] Fix possible hang in LL/SC futex loops.Ralf Baechle
The LL / SC loops in __futex_atomic_op() have the usual fixups necessary for memory acccesses to userspace from kernel space installed: __asm__ __volatile__( " .set push \n" " .set noat \n" " .set mips3 \n" "1: ll %1, %4 # __futex_atomic_op \n" " .set mips0 \n" " " insn " \n" " .set mips3 \n" "2: sc $1, %2 \n" " beqz $1, 1b \n" __WEAK_LLSC_MB "3: \n" " .set pop \n" " .set mips0 \n" " .section .fixup,\"ax\" \n" "4: li %0, %6 \n" " j 2b \n" <----- " .previous \n" " .section __ex_table,\"a\" \n" " "__UA_ADDR "\t1b, 4b \n" " "__UA_ADDR "\t2b, 4b \n" " .previous \n" : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) : "memory"); The branch at the end of the fixup code, it goes back to the SC instruction, no matter if the fault was first taken by the LL or SC instruction resulting in an endless loop which will only terminate if the address become valid again due to another thread setting up an accessible mapping and the CPU happens to execute the SC instruction successfully which due to the preceeding ERET instruction of the fault handler would only happen if UNPREDICTABLE instruction behaviour of the SC instruction without a preceeding LL happens to favor that outcome. But normally processes are nice, pass valid arguments and we were just getting away with this. Thanks to Kaz Kylheku <kaz@zeugmasystems.com> for providing the original report and a test case. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26[MIPS] Fix context DSP context / TLS pointer switching bug for new threads.Ralf Baechle
A new born thread starts execution not in schedule but rather in ret_from_fork which results in it bypassing the part of the code to load a new context written in C which are the DSP context and the userlocal register which Linux uses for the TLS pointer. Frequently we were just getting away with this bug for a number of reasons: o Real world application scenarios are very unlikely to use clone or fork in blocks of DSP code. o Linux by default runs the child process right after the fork, so the child by luck will find all the right context in the DSP and userlocal registers. o So far the rdhwr instruction was emulated on all hardware so userlocal wasn't getting referenced at all and the emulation wasn't suffering from the issue since it gets it's value straight from the thread's thread_info. Fixed by moving the code to load the context from switch_to() to finish_arch_switch which will be called by newborn and old threads. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26[MIPS] IP32: More interrupt renumbering fixes.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26[MIPS] time: MIPSsim's plat_time_init doesn't need to be irq safe.Ralf Baechle
It's running early during the bootup process so interrupts are still off. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26[MIPS] time: Fix negated condition in cevt-r4k driver.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26[MIPS] Fix pcspeaker build.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-11-26libata: bump transfer chunk size if it's oddTejun Heo
None of the drives I have follows what the standard says about transfer chunk size. Of the four SATA and six PATA ATAPI devices tested, four ignore transfer chunk size completely and the ones which honor it don't behave according to the spec when it's odd. According to the spec, transfer chunk size can be odd if the amount of data to transfer equals or is smaller than the chunk size and the device can indicate the same odd number and transfer the whole thing at one go with a pad byte appended. However, in reality, none of the drives I have does that. They all indicate and transfer even number of bytes one byte shorter than the chunk size first; then indicate and transfer two bytes, which is clearly out of spec. In addition to unnecessary second PIO data phase, this also creates a weird problem when combined with SATA controllers which perform PIO via DMA. Some of these controllers use actualy number of bytes received to update DMA pointer so chunks which are sized 4n + 2 makes DMA pointer off by two bytes. This causes data corruption and buffer overruns. This patch rounds nbytes up to the nearest even number such that ATAPI devices don't split data transfer for the last odd byte. This shouldn't confuse controllers which depend on transfer chunk size as devices will report the rounded-up number, actually transfer that much and padding buffer is there to receive them. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-26libata: Return proper ATA INT status in pata_bf54x driversonic zhang
INT status can be OR. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-26[IPV4]: Remove bogus ifdef mess in arp_processAdrian Bunk
The #ifdef's in arp_process() were not only a mess, they were also wrong in the CONFIG_NET_ETHERNET=n and (CONFIG_NETDEV_1000=y or CONFIG_NETDEV_10000=y) cases. Since they are not required this patch removes them. Also removed are some #ifdef's around #include's that caused compile errors after this change. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-26[SKBUFF]: Free old skb properly in skb_morphHerbert Xu
The skb_morph function only freed the data part of the dst skb, but leaked the auxiliary data such as the netfilter fields. This patch fixes this by moving the relevant parts from __kfree_skb to skb_release_all and calling it in skb_morph. It also makes kfree_skbmem static since it's no longer called anywhere else and it now no longer does skb_release_data. Thanks to Yasuyuki KOZAKAI for finding this problem and posting a patch for it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-26[IPV4]: Fix memory leak in inet_hashtables.h when NUMA is onPavel Emelyanov
The inet_ehash_locks_alloc() looks like this: #ifdef CONFIG_NUMA if (size > PAGE_SIZE) x = vmalloc(...); else #endif x = kmalloc(...); Unlike it, the inet_ehash_locks_alloc() looks like this: #ifdef CONFIG_NUMA if (size > PAGE_SIZE) vfree(x); else #else kfree(x); #endif The error is obvious - if the NUMA is on and the size is less than the PAGE_SIZE we leak the pointer (kfree is inside the #else branch). Compiler doesn't warn us because after the kfree(x) there's a "x = NULL" assignment, so here's another (minor?) bug: we don't set x to NULL under certain circumstances. Boring explanation, I know... Patch explains it better. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-26[IPSEC]: Temporarily remove locks around copying of non-atomic fieldsHerbert Xu
The change 050f009e16f908932070313c1745d09dc69fd62b [IPSEC]: Lock state when copying non-atomic fields to user-space caused a regression. Ingo Molnar reports that it causes a potential dead-lock found by the lock validator as it tries to take x->lock within xfrm_state_lock while numerous other sites take the locks in opposite order. For 2.6.24, the best fix is to simply remove the added locks as that puts us back in the same state as we've been in for years. For later kernels a proper fix would be to reverse the locking order for every xfrm state user such that if x->lock is taken together with xfrm_state_lock then it is to be taken within it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-25[CIFS] Fix check after use error in ACL codeSteve French
Spotted by the coverity scanner. CC: Adrian Bunk <bunk@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
2007-11-25Merge branch 'master' of /pub/scm/linux/kernel/git/torvalds/linux-2.6Steve French
2007-11-24IB/iser: Add missing counter increment in iser_data_buf_aligned_len()Erez Zilber
While adding sg chaining support to iSER, a "for" loop was replaced with a "for_each_sg" loop. The "for" loop included the incrementation of 2 variables. Only one of them is incremented in the current "for_each_sg" loop. This caused iSER to think that all data is unaligned, and all data was copied to aligned buffers. This patch increments the missing counter inside the "for_each_sg" loop whenever necessary. Signed-off-by: Erez Zilber <erezz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-24IB/ehca: Fix static rate regressionJoachim Fenkes
Wrong choice of port number caused modify_qp() to fail -- fixed. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-11-23pata_ali: trim trailing whitespace (fix checkpatch complaints)Jeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-11-23pata_isapnp: Polled devicesAlan Cox
If a card has no IRQ then pass no interrupt handler but allow polled usage. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23pata_hpt37x: Fix cable detect bug spotted by SergeiAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23pata_ali: Lots of problems still showing up with small ATAPI DMAAlan Cox
Hopefully there is a better long term solution but for now lets favour reliability. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23pata_ali: Add Mitac 8317 and derivativesAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23libata-core: List more documentation sources for referenceAlan Cox
And next time I'll be able to find the ata tape spec easily... Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23ata_piix: Invalid use of writel/readl with iomapAlan Cox
Should use ioread* as discussed previously Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23sata_sil24: fix sg table sizingTejun Heo
sil24 unnecessarily used LIBATA_MAX_PRD and ATAPI sg table was short by one entry which might cause very obscure problems. This patch updates sg table sizing such that * One full page is used for PRB + sg table. On 4k page, this results in 253 sg's. * Make ATAPI sg block properly sized. * Make build fail if command block size doesn't equal PAGE_SIZE. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23pata_jmicron: fix disabled port handling in jmicron_pre_reset()Tejun Heo
There are two bugs in disabled port handling. * test in PORT_PATA0 is reversed * ->prereset should return -ENOENT for disabled ports not 0 The first bug makes the PATA channel considered disabled but the second bug saves the day by returning 0. The net result is that cable is always left at ATA_CBL_UNKNOWN. This results in false 80c configuration and thus transfer errors. This patch fixes both bugs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23pata_sil680: kill bogus reset code (take 2)Sergei Shtylyov
Since writing to two reserved bits ain't much of a housekeeping, I think it's time we get rid of the custom error handler in this driver. ;-) Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-23[CRYPTO] api: Fix potential race in crypto_remove_spawnHerbert Xu
As it is crypto_remove_spawn may try to unregister an instance which is yet to be registered. This patch fixes this by checking whether the instance has been registered before attempting to remove it. It also removes a bogus cra_destroy check in crypto_register_instance as 1) it's outside the mutex; 2) we have a check in __crypto_register_alg already. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-23[CRYPTO] authenc: Move initialisations up to shut up gccHerbert Xu
It seems that newer versions of gcc have regressed in their abilities to analyse initialisations. This patch moves the initialisations up to avoid the warnings. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-23[TCP] MTUprobe: Cleanup send queue check (no need to loop)Ilpo Järvinen
The original code has striking complexity to perform a query which can be reduced to a very simple compare. FIN seqno may be included to write_seq but it should not make any significant difference here compared to skb->len which was used previously. One won't end up there with SYN still queued. Use of write_seq check guarantees that there's a valid skb in send_head so I removed the extra check. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: John Heffner <jheffner@psc.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-15 17:04:33 +0000