aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-12-01[PATCH] ipw2200: kzalloc conversion and Kconfig dependency fixTakis
- Use kzalloc for IPW2200 - Fix config dependency for IPW2200 Signed-off-by: Panagiotis Issaris <takis@issaris.org> Cc: James Ketrenos <jketreno@linux.intel.com> Cc: Yi Zhu <yi.zhu@intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01Merge branch 'upstream-fixes'Jeff Garzik
2005-12-01[netdrvr skge] fix typo, fix buildJeff Garzik
2005-12-01[PATCH] airo.c: add support for IW_ENCODE_TEMP (i.e. xsupplicant)Dan Streetman
Hello Jeff, this patch changes causes the airo driver to not reset the card when a temporary WEP key is set, when the IW_ENCODE_TEMP flag is used. This is needed for xsupplicant as 802.1x, LEAP, etc. change WEP keys frequently after authentication and resetting the card causes infinite reauthentication. Javier and Jean agree with the patch, Javier suggested I send this to you, can you apply this? Thanks. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[netdrvr fmvj18x_cs] fix multicast bugKomuro
* use set_rx_mode to (re)initialize the multicast table. * MC_FILTERBREAK is 64 (= 8 * 8bit) * remove local_info_t.mc_filter
2005-12-01[wireless airo] reset card in initMatthieu CASTET
without this patch after an rmmod, modprobe the card won't work anymore until the next reboot. This patch seem safe to apply for all cards as the bsd driver already do that. I had to add a timeout because strange things happen (issuecommand will fail) if the card is already reseted (after a reboot). PS : it seems there are missing reset when leaving monitor mode... Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
2005-12-01[PATCH] skge: handle VLAN checksum correctly on yukon rev 0Stephen Hemminger
If using UDP over VLAN, with the skge driver there is a possibility of generating an incorrect checksum. This is a unlikely occurrence because it is only an issue on Yukon revision 0, and that revision doesn't seem to exist on any current hardware (probably early prototype). Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] orinoco: fix setting power management parametersPavel Roskin
Power management parameters could not be set by iwconfig due to incorrect error handling. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] jazzsonic: Fix platform device codeRalf Baechle
Use platform_driver_unregister not driver_unregister to unregister a struct platform_driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] jazzsonic: Fix build error.Ralf Baechle
jazz_sonnic_device -> jazz_sonic_device Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] mipsnet: Fix Copyright notice.Ralf Baechle
Sorry, no sekr1t mips c0dez ;-) Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ixp2000: add driver version, bump version to 0.2Lennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ixp2000: add netpoll supportLennert Buytenhek
Add netpoll support to the ixp2000 driver. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] enp2611: disable/enable SERDES carrier on interface down/upLennert Buytenhek
Disable/enable the SERDES carrier when an interface is administratively downed/upped. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] pm3386: implement resetLennert Buytenhek
Implement pm3386 reset. A reset zeroes out the internally stored MAC addresses, so we need to save and reload them by hand. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] pm3386: add hook for setting carrierLennert Buytenhek
Add a pm3386 hook for disabling/enabling the SERDES carrier, so that we can disable it when the interface is administratively downed, and enable it when it is upped. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] pm3386: add hook for setting MAC addressLennert Buytenhek
When we reset the pm3386, it loses its internally stored MAC addresses that were programmed into it by the bootloader (and are used by the hardware for the generation of PAUSE frames.) Add a hook to allow setting these addresses so that we can program them back by hand. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ixp2000: report MAC addresses for each port on initLennert Buytenhek
After initialising, report the MAC address that we're using for each port. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] enp2611: report link up/down eventsLennert Buytenhek
Report carrier going up/down. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] enp2611: use 'dev' in link status timerLennert Buytenhek
We assign nds[i] to a local variable 'dev', which we never use afterwards. Use the local variable instead. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] enp2611: don't check netif_running() in link status timerLennert Buytenhek
Even after an interface has gone !netif_running(), we still want to catch the 'carrier went down' event for our internal bookkeeping. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ixp2000: use netif_rx_schedule_testLennert Buytenhek
The sky2 driver introduced netif_rx_schedule_test(). This is exactly what we need, so remove our local version of this function (which was called netif_rx_schedule_prep_notup) and use the generic one instead. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] caleb/pm3386: include proper header filesLennert Buytenhek
Make caleb.c and pm3386.c include their own header files, to catch incorrect prototype definitions. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] pm3386: remove unnecessary udelaysLennert Buytenhek
Remove a number of unnecessary udelay() calls. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] pm3386: zero stats properlyLennert Buytenhek
Zero our stats structure properly. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ixp2000: register netdevices lastLennert Buytenhek
Do not register our netdevices with the kernel until we've actually finished setting up the hardware and microcode. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ibm_emac: fix graceful stop timeout handlingEugene Surovegin
This patch fixes graceful stop timeout handling in PPC4xx EMAC driver. Currently, when we stop TX/RX channels we just do some number of loops without relying on actual spent time. This has finally bitten me on one of our systems (heavy network traffic during start up, RX channel is stopped several times to configure multicast list). Graceful channel stop can take up to 1 frame time, so I've added device specific timeout counter which depends on current link speed and calls to udelay() to really wait required amount of time before giving up. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sk98lin: remove /proc interfaceshemminger@osdl.org
Remove device specific proc interface. It doesn't handle renames correctly; it ain't worth fixing. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sk98lin: remove redundant fields in device infoshemminger@osdl.org
Shrink size of per device data by removing redundant fields or things that are only used at boot up. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sk98lin: allow ethtool checksum on/off per portshemminger@osdl.org
Allow control of checksumming parameters via ethtool. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01Merge branch 'upstream-fixes'Jeff Garzik
2005-12-01[PATCH] sk98lin: avoid message confusion with skgeshemminger@osdl.org
Avoid possible confusion between skge and sk98lin driver by tagging messages properly. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sk98lin: add permanent address supportshemminger@osdl.org
Add permanent address and link status support via ethtool. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sk98lin: fix checksumming codeshemminger@osdl.org
Remove code from sk98lin that does it's own checksum validation. This code is incorrect when dealing with nested protocols like VLAN's, and it is better to use regular receive code path to handle hardware checksum. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: update version numbershemminger@osdl.org
Update version number and print version in boot message. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: use pci_register_drivershemminger@osdl.org
Switch to using pci_register_driver as per current convention. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: remove pci-express hacksshemminger@osdl.org
Eliminate special case tuning for PCI-Express. This code causes receive hangs and doesn't help performance much anyway. Signed-off-by: Stephen Hemminger <shemmnger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: byteorder annotationshemminger@osdl.org
Use byteorder annotation for hardware structures Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: dual port tx completionshemminger@osdl.org
Sometimes on dual port cards, one tx complete may cover both ports. To handle that rearrange poll routine to lookup at end. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: race with MTU changeshemminger@osdl.org
Avoid possible race conditions when doing MTU and change and shutdown. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: change netif_rx_schedule_test to __netif_schedule_prepshemminger@osdl.org
I didn't like the name netif_rx_schedule_test(), in earlier patches and changed to __netif_rx_schedule_prep to be more consistent. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: handle DMA boundary crossingshemminger@osdl.org
Handle the case of DMA spanning 32 bit boundary. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: add Yukon-EC ultra supportshemminger@osdl.org
Add support for Yukon-EC Ultra chip as implemented in SysKonnect's driver version 8.26. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: improve receive performanceshemminger@osdl.org
Changes to receive side processing: * bigger receive ring * clean up polling loop Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: fix receive flush/pause issuesshemminger@osdl.org
Fix issues with pause and flush. This code works on all chip versions tested. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: add MII supportshemminger@osdl.org
Add MII ioctl interface to sky2. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sky2: eliminate special case for EC-A1shemminger@osdl.org
Eliminate special case for EC-A1. The overhead isn't so great that having config option is worth it. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] e1000: fix for dhcp issueJesse Brandeburg
Parse outgoing packets in e1000_transfer_dhcp_info as raw packet even if protocol bits are set. pump, for instance causes kernel panic on some systems, if parsed via udp header. Thanks to Derrell Lipman <Derrell.Lipman@BacklotTech.com> for reporting and testing. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01Merge branch 'for-jeff' of ↵Jeff Garzik
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6
2005-12-01Merge branch 'master'Jeff Garzik
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-03 17:52:42 +0000