| Age | Commit message (Collapse) | Author |
|---|
|
Created an attachment (id=594) / BZ#79
Add missing platform_data that caused the GTA01 to crash on suspend/resume
The interface to the jbt6k74 driver changed slightly; this patch adds the
missing platform_data for the GTA01. This prevents a crash while suspending.
This patch also makes some minor changes to cleanup and clarify some debug
messages.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Created an attachment (id=593) / from BZ#79
Updated patch to preserve the power state of the GPS on the GTA01
Currently the GPS is powered up after a suspend/resume occurs. This patch will
only power the GPS back up if it was powered up when the GTA01 suspended.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
s3c2410_dma_request used to return 0 for OK and something else
for error, now it returns -ve error code or +ve dma channel index + flag
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
<linux/driver.h> is just empty and is deprecated now
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Holger got beaten to it on mainline, they provide a
s3c2410_gpio_irq2pin() instead of the name he used.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
I don't know what device the symlink should be linked
against on GTA01, somebody that does know needs to edit
it in where it says "FIXME"... I think the supplied method
can work OK otherwise.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
struct input_dev in include/linux/input.h used to have a union
cdev which contained the associated device struct pointer. This
got simplified out in 2.6.25, so this patch removes cdev from
our drivers that used it before.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
mostly built-in defconfig for 2.6.25
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
GTA01 -only
Restore power button functionality after resume operation
Per Werner's suggestion, run the PMU interrupt handler immediately after resume
to clear/handle any pending interrupts from that device. This appears to
resolve the dead-powerbutton-after-resume problem. This is not well-tested;
need feedback to see if there are any side-effects or other problems.
From BZ 1313
Signed-off-by: Mike Wester <mwester@dis.net>
|
|
Patch to register the SPI device and thus the save/resume for the display
This patch does *NOT* resolve this problem, but it does make things a bit
better. The SPI device name changed with 2.6.24, and the change was made for
the gta02 but never propagated to the gta01. With this change, you'll now see
the entries for the spi bus and the display controller in /sys; and the display
controller suspend/resume functions will be called.
(via BZ 79)
Signed-off-by: Mike Wester <mwester@dis.net>
|
|
Make sure we can't lose a jack interrupt in debounce, despite it is
a one-in-a-million thing that just needs replug to clear
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
- Any setting of any PIN on bank B will undo the LED setting.
Introduce neo1973_gpb_set_pin to set the PIN in a way not losing
the LED or any other shadowed setting.
- Update users of GPBXY for gta01 and gta02.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
The bluetooth enable and modem reset switched the order in
gta02. Do not poke the bluetooth dongle when we want to reset
the modem.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
to_bundle returned the wrong data. The platform_device is the
parent of the class_device used by the LED device class. Return
the correct class.
num_leds was not set to the correct number of registered LEDs. All
loops using num_leds (e.g. module unloading) were not executed at
all.
On removal of the module disable all LEDs.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
Currently we do not use the PWM code to drive the LEDS. We have enabled the PWM
for four timer sources but disable it only for three, fix that up.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
If we build a kernel without gta01/gta02 the
machine_is_ macro will expand to (0) and the compiler will
optimize the if (0) {} away.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
Headphone jack detection is bouncy, it can trigger multiple interrupts
on insertion or removal. This patch adds a workqueue that waits out the
interrupt spew in 100ms units, and if it sees no more interrupts for 100ms
only then samples and reports the jack state. I was unable to get a bounce
after 20 or so tries after this.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Glamo "cmd mode" is modal, but nothing took care about locking.
Also cmd mode was entered recursively in rotate_lcd().
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
loglevl=9 can cause failure to init glamo-fb
problem seems to be too low timeout when text scrolling can
delay commandqueue going empty
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Only enable or disable the interrupt if we see we are in the opposing state.
Also force that damn GSM download signal deasserted on probe at the time we
set the logical state for it to deasserted.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Add in some audio config needed
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
see
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=1288
|
|
Similar to the neo1974_pm_gsm.c keep a static struct around. On suspend
we will save the current power state, on resume we will use this
information to enable power of the GPS only when it was powered on before.
This is passing basic tests with screen /dev/ttySAC1 on suspend and resume.
Only do this for the GTA02 as I don't have a gllin setup for the GTA01
I wonder why the suspend and resume code is not using gps_pwron_set and why
for the GTA02 we need to keep the state of the GPIOs, this should be done
by the s3c code.
Signed-Off-by: Holger Frether <zecke@openmoko.org>
|
|
GTA02_GPIO_nDL_GSM defaults to high/1. On resume do not enable the DL_GSM if
it was not enabled before. This is stopping the storm of interrupts.
Fix the logic in the download file handling. Downloads are disabled (0) when
the GTA02_GPIO_nDL_GSM is high (1). To enable downloading set
GTA02_GPIO_nDL_GSM to low (0, !on). Disable the jack interrupt while download
the is active. When disabling download we will get a couple of jack interrupts
but this is hardly avoidable.
Avoid reading the GPIO value if we do not even have a console set.
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Samsung SoC
Use this irq_to_gpio in the neo1973 keyboard driver
|
|
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
GTA01_GPIO_AUX_KEY looks odd.
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
From: Andy Green <andy@openmoko.com>
Sigend-off-by: Andy Green <andy@openmoko.com>
|
|
Add function
int gta02_get_pcb_revision(void)
which returns state of GTA02 PCB revision pins. It is also called
and logged during boot with KERN_INFO. The results look like:
b9 b8 b2 b1 b0
GPD4 GPD3 GPD0 GPC15 GPC13
GTA02 A5 and before: 0x000
GTA02 A6 : 0x001
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Hey,
I see no reason to send LL debugging messages to the modem. This can happen if
we compile the Samsung SoC with PM debugging as in andy's git branch.
From 452c17990dfeb9c2eb2ffa7ded4d24ddb1bcd4b2 Mon Sep 17 00:00:00 2001
From: Holger Freyther <zecke@openmoko.org>
Date: Sun, 23 Mar 2008 00:57:28 +0100
Subject: [PATCH] Never ever send debug messages to the modem. The serial
console is
on UART2, send the messages for decompressing and low level debugging
there.
Signed-Off-by: Holger Freyther <zecke@openmoko.org>
|
|
We used to drive output high into GPS unit in suspend
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Add platform stuff to deal with going in and out of suspend
so the motion sensor IO is not driving high into unpowered sensors
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Hey,
the legacy application 'atd' from Russ Nelson/Nils Faerber, used by Qtopia, to
schedule alarms currently fails to start as the the above ioctl is failing.
The other drivers in drivers/rtc implement the above ioctl and we can
implement it too.
The code to mask/unmask the RTC alarm is copied from the set_alarm routine and
adapted to use the reg_set_bit_mask and reg_set_clear_mask.
It is compiling, so it must work. Please welcome me the lkml way ;)
Signed-Off-by: Holger Hans Peter Freyther <zecke@openmoko.org>
|
|
We don't take care to stop driving generated USB host power even
when we have a 1A charger connected on the same pins.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Unless I really really missed the point, there is no support for enabling
USB Host power for USB host mode. This patch adds a /sys node for GTA02
that allows control of the charge pump for 5V out on the USB mini connector
It doesn't change any logical mode in the CPU, just enables (1) and disables
(0) USB host power.
# cat /sys/devices/platform/neo1973-pm-host.0/hostmode
0
# echo 1 > /sys/devices/platform/neo1973-pm-host.0/hostmode
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Starting up all the PWMs seems to be needed for PWM3 operation
and FIQ / HDQ / VIB operation. But after starting, turn the
LEDs to GPIO-only.
Applies on top of Willie's patch
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
|
|
|
|
|
|
We need to be able to use the config option CONFIG_MMC_UNSAFE_RESUME that allows the rootfs
to live on SD. But when we use this, it tries to send a reset command to the SD card during
suspend -- and unfortunately many things like Power have suspended by then.
This patch again rejects IO on the MMC device during suspend of the MMC device, and it
gives the result the rootfs on SD card works okay.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
|
|
|
|
Add support for GPA[] GPIO bus since we have some NCs
but they seem to output-only IO cells so no matter
Signed-off-by: Andy Green <andy@openmoko.com>
|
