aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-02-15omap2/3/4: Fix mbox init for multi-omapTony Lindgren
Fix mbox init for multi-omap Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Fix omap2_map_common_io for multi-omapTony Lindgren
Fix omap2_map_common_io for multi-omap Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Fix dmtimer.c for multi-omap bootTony Lindgren
Fix dmtimer.c for multi-omap boot. Also remove legacy clk_enable/disable wrappers that are no longer needed. Note that the clock handling should be further improved to make use of the clock aliases. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3: Multiboot compile fixes to compile in omap2 and omap3Tony Lindgren
Allows compiling in omap2 and omap3. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3: Make get_irqnr_and_base common for mach-omap2 multibootTony Lindgren
Make get_irqnr_and_base common for mach-omap2 multiboot Thanks to a tip from Russell King <rmk+kernel@arm.linux.org.uk>, this also optimizes the code for non-multiboot configurations by using get_irqnr_preamble. Note that this will only work currently for 24xx and 34xx. Support for 44xx can be added later on for basic multiboot, and similar patch should be done for mach-omap1/entry-macro.S. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15Merge branch 'debug-ll' into omap-for-linusTony Lindgren
2010-02-15omap: Remove old DEBUG_LL serial port optionsTony Lindgren
These are no longer needed. Note that zoom boards should now set their own function in uncompress.h and debug-macro.S for the external UART. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Make uncompress code and DEBUG_LL code genericTony Lindgren
Define arch_decomp_setup() the same way as some other architectures do. Use arch_id to configure the debug uart based on the machine_is by storing it into the uart scratchpad register for DEBUG_LL code to use. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Clean the serial port definesTony Lindgren
This way we don't have conflicts with the defines with compiling in multiple omaps. Set the addresses for uarts in struct omap_globals for the early serial init code. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-12Merge branch 'for-tony' of git://gitorious.org/linux-omap-dss2/linux into ↵Tony Lindgren
omap-for-linus
2010-02-12ARM: 5910/1: ARM: Add tmp register for addruart and loadspTony Lindgren
Otherwise more complicated uart configuration won't be possible. We can use r1 for tmp register for both head.S and debug.S. NOTE: This patch depends on another patch to add the the tmp register into all debug-macro.S files. That can be done with: $ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/" arch/arm/*/include/*/debug-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12omap3: cm-t35: add DSS2 display supportMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12OMAP: AM3517: Enable DSS2 for AM3517EVM boardVaibhav Hiremath
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> [tomi.valkeinen@nokia.com: removed defconfig changes] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-12OMAP: Enable DSS2 for OMAP3EVM boardVaibhav Hiremath
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> [tomi.valkeinen@nokia.com: removed evm defconfig changes] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-10Merge branch 'omap-fixes-for-linus' into omap-for-linusTony Lindgren
2010-02-10OMAP: hsmmc: fix memory leakAaro Koskinen
The platform data allocated with kmalloc() will become unreachable once the init is complete, so it should be freed. The problem was discovered by kmemleak. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-07Fix race in tty_fasync() properlyLinus Torvalds
This reverts commit 703625118069 ("tty: fix race in tty_fasync") and commit b04da8bfdfbb ("fnctl: f_modown should call write_lock_irqsave/ restore") that tried to fix up some of the fallout but was incomplete. It turns out that we really cannot hold 'tty->ctrl_lock' over calling __f_setown, because not only did that cause problems with interrupt disables (which the second commit fixed), it also causes a potential ABBA deadlock due to lock ordering. Thanks to Tetsuo Handa for following up on the issue, and running lockdep to show the problem. It goes roughly like this: - f_getown gets filp->f_owner.lock for reading without interrupts disabled, so an interrupt that happens while that lock is held can cause a lockdep chain from f_owner.lock -> sighand->siglock. - at the same time, the tty->ctrl_lock -> f_owner.lock chain that commit 703625118069 introduced, together with the pre-existing sighand->siglock -> tty->ctrl_lock chain means that we have a lock dependency the other way too. So instead of extending tty->ctrl_lock over the whole __f_setown() call, we now just take a reference to the 'pid' structure while holding the lock, and then release it after having done the __f_setown. That still guarantees that 'struct pid' won't go away from under us, which is all we really ever needed. Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Américo Wang <xiyou.wangcong@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-06Linux 2.6.33-rc7Linus Torvalds
2010-02-06Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (w83781d) Request I/O ports individually for probing hwmon: (lm78) Request I/O ports individually for probing hwmon: (adt7462) Wrong ADT7462_VOLT_COUNT
2010-02-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Fix leak of relocs along do_execbuffer error path drm/i915: slow acpi_lid_open() causes flickering - V2 drm/i915: Disable SR when more than one pipe is enabled drm/i915: page flip support for Ironlake drm/i915: Fix the incorrect DMI string for Samsung SX20S laptop drm/i915: Add support for SDVO composite TV drm/i915: don't trigger ironlake vblank interrupt at irq install drm/i915: handle non-flip pending case when unpinning the scanout buffer drm/i915: Fix the device info of Pineview drm/i915: enable vblank interrupt on ironlake drm/i915: Prevent use of uninitialized pointers along error path. drm/i915: disable hotplug detect before Ironlake CRT detect
2010-02-06Fix potential crash with sys_move_pagesLinus Torvalds
We incorrectly depended on the 'node_state/node_isset()' functions testing the node range, rather than checking it explicitly. That's not reliable, even if it might often happen to work. So do the proper explicit test. Reported-by: Marcus Meissner <meissner@suse.de> Acked-and-tested-by: Brice Goglin <Brice.Goglin@inria.fr> Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: pandora: Add APLL supply to fix audio output ALSA: ice1724 - aureon - fix wm8770 volume offset ALSA: cosmetic: make hda intel interrupt name consistent with others ALSA: hda - Delay switching to polling mode if an interrupt was missing ALSA: ctxfi - fix PTP address initialization
2010-02-05hwmon: (w83781d) Request I/O ports individually for probingJean Delvare
Different motherboards have different PNP declarations for W83781D/W83782D chips. Some declare the whole range of I/O ports (8 ports), some declare only the useful ports (2 ports at offset 5) and some declare fancy ranges, for example 4 ports at offset 4. To properly handle all cases, request all ports individually for probing. After we have determined that we really have a W83781D or W83782D chip, the useful port range will be requested again, as a single block. I did not see a board which needs this yet, but I know of one for lm78 driver and I'd like to keep the logic of these two drivers in sync. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2010-02-05hwmon: (lm78) Request I/O ports individually for probingJean Delvare
Different motherboards have different PNP declarations for LM78/LM79 chips. Some declare the whole range of I/O ports (8 ports), some declare only the useful ports (2 ports at offset 5) and some declare fancy ranges, for example 4 ports at offset 4. To properly handle all cases, request all ports individually for probing. After we have determined that we really have an LM78 or LM79 chip, the useful port range will be requested again, as a single block. This fixes the driver on the Olivetti M3000 DT 540, at least. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2010-02-05hwmon: (adt7462) Wrong ADT7462_VOLT_COUNTRay Copeland
The #define ADT7462_VOLT_COUNT is wrong, it should be 13 not 12. All the for loops that use this as a limit count are of the typical form, "for (n = 0; n < ADT7462_VOLT_COUNT; n++)", so to loop through all voltages w/o missing the last one it is necessary for the count to be one greater than it is. (Specifically, you will miss the +1.5V 3GPIO input with count = 12 vs. 13.) Signed-off-by: Ray Copeland <ray.copeland@aprius.com> Acked-by: "Darrick J. Wong" <djwong@us.ibm.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org
2010-02-05Merge remote branch 'alsa/fixes' into for-linusTakashi Iwai
2010-02-05Merge branch 'fix/asoc' into for-linusTakashi Iwai
2010-02-05Merge branch 'fix/hda' into for-linusTakashi Iwai
2010-02-05Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] Call flush_dcache_page after PIO data transfers in libata-sff.c ahci: add Acer G725 to broken suspend list libata: fix ata_id_logical_per_physical_sectors libata-scsi passthru: fix bug which truncated LBA48 return values
2010-02-05CS5536: apply pci quirk for BIOS SMBUS bugAndres Salomon
The new cs5535-* drivers use PCI header config info rather than MSRs to determine the memory region to use for things like GPIOs and MFGPTs. As anticipated, we've run into a buggy BIOS: [ 0.081818] pci 0000:00:14.0: reg 10: [io 0x6000-0x7fff] [ 0.081906] pci 0000:00:14.0: reg 14: [io 0x6100-0x61ff] [ 0.082015] pci 0000:00:14.0: reg 18: [io 0x6200-0x63ff] [ 0.082917] pci 0000:00:14.2: reg 20: [io 0xe000-0xe00f] [ 0.083551] pci 0000:00:15.0: reg 10: [mem 0xa0010000-0xa0010fff] [ 0.084436] pci 0000:00:15.1: reg 10: [mem 0xa0011000-0xa0011fff] [ 0.088816] PCI: pci_cache_line_size set to 32 bytes [ 0.088938] pci 0000:00:14.0: address space collision: [io 0x6100-0x61ff] already in use [ 0.089052] pci 0000:00:14.0: can't reserve [io 0x6100-0x61ff] This is a Soekris board, and its BIOS sets the size of the PCI ISA bridge device's BAR0 to 8k. In reality, it should be 8 bytes (BAR0 is used for SMBus stuff). This quirk checks for an incorrect size, and resets it accordingly. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Tested-by: Leigh Porter <leigh@leighporter.org> Tested-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-05percpu: add __percpu for sparseStephen Rothwell
This is to make the annotation of percpu variables during the next merge window less painfull. Extracted from a patch by Rusty Russell. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-05Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: fix r300 vram width calculations drm/radeon/kms: rs400/480 MC setup is different than r300. drm/radeon/kms: make initial state of load detect property correct. drm/radeon/kms: disable HDMI audio for now on rv710/rv730 drm/radeon/kms: don't call suspend path before cleaning up GPU drivers/gpu/drm/radeon/radeon_combios.c: fix warning ati_pcigart: fix printk format warning drm/r100/kms: Emit cache flush to the end of command buffer. (v2) drm/radeon/kms: fix regression rendering issue on R6XX/R7XX drm/radeon/kms: move blit initialization after we disabled VGA
2010-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: apply updated fallocate i_size fix Btrfs: do not try and lookup the file extent when finishing ordered io Btrfs: Fix oopsen when dropping empty tree. Btrfs: remove BUG_ON() due to mounting bad filesystem Btrfs: make error return negative in btrfs_sync_file() Btrfs: fix race between allocate and release extent buffer.
2010-02-05ASoC: pandora: Add APLL supply to fix audio outputGrazvydas Ignotas
Pandora's external DAC is using 256*Fs output from the TWL4030 codec, and TWL4030 needs to have APLL enabled for it's 256*Fs output to function. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-02-05ALSA: ice1724 - aureon - fix wm8770 volume offsetJaroslav Kysela
The volume register is from 0..0x7f and 0..0x1a range is mute. Also, fix mute combining in wm_vol_put(). The wrong behaviour was noticed by Peter Christensen. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-02-05ALSA: cosmetic: make hda intel interrupt name consistent with othersMaxim Levitsky
This renames the interrupt name in /proc/interrupt. HDA Intel -> hda_intel This also eliminates space from the name, probably helping some parsers. Don't think anybody depends on this name in userspace Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-05ALSA: hda - Delay switching to polling mode if an interrupt was missingMaxim Levitsky
My sound codec seems sometimes (very rarely) to omit interrupts (ALC268) However, interrupt mode still works. Thus if we get timeout, poll the codec once. If we get 3 such polls in a row, then switch to polling mode. This patch is maybe an bandaid, but this might be a workaround for hardware bug. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-05drm/radeon/kms: fix r300 vram width calculationsDave Airlie
This was incorrect according to the docs and the UMS driver does it like this. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05drm/radeon/kms: rs400/480 MC setup is different than r300.Dave Airlie
Boot testing on my rs480 laptop found the MC idle never happened on startup, a quick check with AMD found the idle bit is in a different place on the rs4xx than r300. Implement a new rs400 mc idle function to fix this. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05drm/radeon/kms: make initial state of load detect property correct.Dave Airlie
this was incorrect on my rs480. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05drm/radeon/kms: disable HDMI audio for now on rv710/rv730Dave Airlie
Support isn't correct yet and we are getting green tinges on the displays. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05drm/radeon/kms: don't call suspend path before cleaning up GPUJerome Glisse
In suspend path we unmap the GART table while in cleaning up path we will unbind buffer and thus try to write to unmapped GART leading to oops. In order to avoid this we don't call the suspend path in cleanup path. Cleanup path is clever enough to desactive GPU like the suspend path is doing, thus this was redondant. Tested on: RV370, R420, RV515, RV570, RV610, RV770 (all PCIE) Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05drivers/gpu/drm/radeon/radeon_combios.c: fix warningAndrew Morton
drivers/gpu/drm/radeon/radeon_combios.c: In function 'radeon_combios_get_lvds_info': drivers/gpu/drm/radeon/radeon_combios.c:893: warning: comparison is always false due to limited range of data type Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05ati_pcigart: fix printk format warningRandy Dunlap
Fix ati_pcigart printk format warning: drivers/gpu/drm/ati_pcigart.c:115: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'dma_addr_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05drm/r100/kms: Emit cache flush to the end of command buffer. (v2)Pauli Nieminen
Cache flush is required in case CPU is accessing rendered data. This fixes glean/readPixSanity test case and random rendering errors in sauerbraten and warzone2100. v2 Fix comment ordering in r100_fence_ring_emit and remove extra defines added in first version. Signed-off-by: Pauli Nieminen <suokkos@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05drm/radeon/kms: fix regression rendering issue on R6XX/R7XXJerome Glisse
It seems that some R6XX/R7XX silently ignore HDP flush when programmed through ring, this patch addback an ioctl callback to allow R6XX/R7XX hw to perform such flush through MMIO in order to fix a regression. For more details see: http://bugzilla.kernel.org/show_bug.cgi?id=15186 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-05drm/radeon/kms: move blit initialization after we disabled VGAJerome Glisse
VGA might be overwritting VRAM and corrupt our blit shader leading to corruption, it likely won't happen if you load fbcon right after radeon. Thanks to Shawn Starr and Andre Maasikas for tracking down this issue. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-04Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Fix wrong register in proc-arm6_7.S data abort handler ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptions ARM: 5904/1: ARM: Always generate the IT instruction when compiling for Thumb-2 ARM: 5907/1: ARM: Fix the reset on the RealView PBX Development board mx35: add a missing comma in a pad definition mx25: make the FEC AHB clk secondary of the IPG mx25: fix time accounting mx25: properly initialize clocks mx25: remove unused mx25_clocks_init() argument i.MX25: implement secondary clocks for uarts and fec i.MX25: Allow secondary clocks in DEFINE_CLOCK ARM: MX3: Fixed typo in declared enum type name. MXC: Add AUDMUXv2 register decode to debugfs mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module mx31ads: Provide a name for EXPIO interrupt chip mx31ads: Allow enable/disable of switchable supplies
2010-02-04Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: Disable serial port autoidle by default omap: Fix access to already released memory in clk_debugfs_register_one() omap: Fix arch/arm/mach-omap2/mux.c: Off by one error omap: Fix 3630 mux errors OMAP2/3: GPMC: ensure valid clock pointer OMAP2/3: IRQ: ensure valid base address ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAP omap: Remove old unused defines for OMAP_32KSYNCT_BASE omap: define _toggle_gpio_edge_triggering only for OMAP1
2010-02-04Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Don't clobber the attribute type in nfs_update_inode() NFS: Fix a umount race NFS: Fix an Oops when truncating a file NFS: Ensure that we handle NFS4ERR_STALE_STATEID correctly NFSv4.1: Don't call nfs4_schedule_state_recovery() unnecessarily NFSv4: Don't allow posix locking against servers that don't support it NFSv4: Ensure that the NFSv4 locking can recover from stateid errors NFS: Avoid warnings when CONFIG_NFS_V4=n NFS: Make nfs_commitdata_release static NFS: Try to commit unstable writes in nfs_release_page() NFS: Fix a reference leak in nfs_wb_cancel_page()
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 05:30:50 +0000