aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-10-14[SPARC64]: Fix powering off on SMP.David S. Miller
Doing a "SUNW,stop-self" firmware call on the other cpus is not the correct thing to do when dropping into the firmware for a halt, reboot, or power-off. For now, just do nothing to quiet the other cpus, as the system should be quiescent enough. Later we may decide to implement smp_send_stop() like the other SMP platforms do. Based upon a report from Christopher Zimmermann. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-14[QLOGICPTI]: Handle INQUIRY response sniffing correctly.David S. Miller
These days, in 2.6.x, even INQUIRY commands are sent using scatter gather lists. Bug reported by Tom 'spot' Callaway. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-14[ARM] 3014/1: Spitz keyboard: Correct the right shift keyRichard Purdie
Patch from Richard Purdie Correct the right shift key entry in the spitz keyboard driver. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14[ARM] 3013/1: Spitz: Fix compile errorsRichard Purdie
Patch from Richard Purdie Remove a couple of lines of accidently added code causing compile errors. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14[ARM] 3012/1: Corgi/Spitz LCD: Use bus_find_device to locate pxafb - fix ↵Richard Purdie
compile error Patch from Richard Purdie Update corgi_lcd to use bus_find_device to locate the pxafb device hence fixing a compile error. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14[ARM] 3011/1: pxafb: Add ability to set device parent + fix spitz compile errorRichard Purdie
Patch from Richard Purdie Add a function to allow machines to set the parent of the pxa framebuffer device. This means the power up/down sequence can be controlled where required by the machine. Update spitz to use the new function, fixing a compile error. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14[SERIAL] Add SupraExpress 336i Sp ASVD modem IDBaris Cicek
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14[ARM] 2980/1: Fix L7200 core.c compileDeepak Saxena
Patch from Deepak Saxena This patch fixes L7200 so that it builds in 2.6.latest. I do not have the hardware so don't know if it actually still works, but the changes are fairly trivial. I am not even sure if anyone still maintains, uses, or cares about this machine type. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-14[ARM] 3009/1: S3C2410 - io.h offsets too large for LDRH/STRHBen Dooks
Patch from Ben Dooks The __inwc/__outwc calls are capable of creating LDRH and STRH instructions with offsets over 8bits as GCC does not have a constraint for an 8bit offset. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13[SPARC64]: Eliminate PCI IOMMU dma mapping size limit.David S. Miller
The hairy fast allocator in the sparc64 PCI IOMMU code has a hard limit of 256 pages. Certain devices can exceed this when performing very large I/Os. So replace with a more simple allocator, based largely upon the arch/ppc64/kernel/iommu.c code. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-13[SPARC64]: Consolidate common PCI IOMMU init code.David S. Miller
All the PCI controller drivers were doing the same thing setting up the IOMMU software state, put it all in one spot. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-13Merge branch 'release' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
2005-10-13[TCP]: Ratelimit debugging warning.Herbert Xu
Better safe than sorry. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-13[CONNECTOR]: Update documentation to match reality.Evgeniy Polyakov
Updated documentation to reflect 2.6.14 netlink changes about socket options, multicasting and group number. Please concider for 2.6.14. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-13[NET]: Disable NET_SCH_CLK_CPU for SMP x86 hostsAndi Kleen
Opterons with frequency scaling have fully unsynchronized TSCs running at different frequencies, so using TSCs there is not a good idea. Also some other x86 boxes have this problem. gettimeofday should be good enough, so just disable it. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-13[NETFILTER]: Fix OOPSes on machines with discontiguous cpu numbering.David S. Miller
Original patch by Harald Welte, with feedback from Herbert Xu and testing by Sébastien Bernard. EBTABLES, ARP tables, and IP/IP6 tables all assume that cpus are numbered linearly. That is not necessarily true. This patch fixes that up by calculating the largest possible cpu number, and allocating enough per-cpu structure space given that. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-13[ARM] 3008/1: the exception table is not read-onlyNicolas Pitre
Patch from Nicolas Pitre ... and therefore should not live in the .text section. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13[ARM] 3007/1: BAST - add CONFIG_ISA to buildBen Dooks
Patch from Ben Dooks The Simtec EB2410ITX (BAST) has a PC/104 slot, and therefore we should enable CONFIG_ISA to allow the drivers for ISA peripherals to be selected Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2005-10-13[ARM] 3006/1: S3C2410 - arch/arm/mach-s3c2410 sparse fixesBen Dooks
Patch from Ben Dooks Remove an unused variable from s3c2410.c and ensure that items not needed to be exported from s3c2440.c are declared static. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-13[ARM] 3005/1: S3C2440 - add definition for s3c2440_set_dsc() call in hardware.hBen Dooks
Patch from Ben Dooks include/asm-arm/arch-s3c2410/hardware.h was missing the definition for s3c2440_set_dsc() Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-10-12Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-10-12Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-10-12Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-10-12[TCP]: Add code to help track down "BUG at net/ipv4/tcp_output.c:438!"Herbert Xu
This is the second report of this bug. Unfortunately the first reporter hasn't been able to reproduce it since to provide more debugging info. So let's apply this patch for 2.6.14 to 1) Make this non-fatal. 2) Provide the info we need to track it down. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-12[NETPOLL]: wrong return for null netpoll_poll_lock()Ben Dooks
When netpoll is not being used, the macro that defines the removed routing netpoll_poll_lock defines the return as zero, but the real routine returns a `void *` Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-12[BRIDGE]: fix race on bridge del ifStephen Hemminger
This fixes the RCU race on bridge delete interface. Basically, the network device has to be detached from the bridge in the first step (pre-RCU), rather than later. At that point, no more bridge traffic will come in, and the other code will not think that network device is part of a bridge. This should also fix the XEN test problems. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-12[SPARC64]: Fix boot failures on SunBlade-150David S. Miller
The sequence to move over to the Linux trap tables from the firmware ones needs to be more air tight. It turns out that to be %100 safe we do need to be able to translate OBP mappings in our TLB miss handlers early. In order not to eat up a lot of kernel image memory with static page tables, just use the translations array in the OBP TLB miss handlers. That solves the bulk of the problem. Furthermore, to make sure the OBP TLB miss path will work even before the fixed MMU globals are loaded, explicitly load %g1 to TLB_SFSR at the beginning of the i-TLB and d-TLB miss handlers. To ease the OBP TLB miss walking of the prom_trans[] array, we sort it then delete all of the non-OBP entries in there (for example, there are entries for the kernel image itself which we're not interested in at all). We also save about 32K of kernel image size with this change. Not a bad side effect :-) There are still some reasons why trampoline.S can't use the setup_trap_table() yet. The most noteworthy are: 1) OBP boots secondary processors with non-bias'd stack for some reason. This is easily fixed by using a small bootup stack in the kernel image explicitly for this purpose. 2) Doing a firmware call via the normal C call prom_set_trap_table() goes through the whole OBP enter/exit sequence that saves and restores OBP and Linux kernel state in the MMUs. This path unfortunately does a "flush %g6" while loading up the OBP locked TLB entries for the firmware call. If we setup the %g6 in the trampoline.S code properly, that is in the PAGE_OFFSET linear mapping, but we're not on the kernel trap table yet so those addresses won't translate properly. One idea is to do a by-hand firmware call like we do in the early bootup code and elsewhere here in trampoline.S But this fails as well, as aparently the secondary processors are not booted with OBP's special locked TLB entries loaded. These are necessary for the firwmare to processes TLB misses correctly up until the point where we take over the trap table. This does need to be resolved at some point. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-12[ARM] 3003/1: SSP channel map register updates for pxa2xxLiam Girdwood
Patch from Liam Girdwood This patch updates the pxa2xx channel map registers definitions in pxa-regs.h Changes:- o Added description for SSP2 registers o Added definitions for SSP3 registers Signed-off-by:Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 3002/1: Wrong parameter to uart_update_timeout() in drivers/serial/pxa.cLothar Wassmann
Patch from Lothar Wassmann The function serial_pxa_set_termios() is calling uart_update_timeout() with the baud rate divisor as third parameter, while uart_update_timeout() expects the baud rate in this place. This results in a bogus port->timeout which is proportional to the baud rate. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2978/1: nwfpe - clean up sparse errorsBen Dooks
Patch from Ben Dooks The NWFPE is producing a number of errors from sparse due to not defining a number of functions in the header files. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2969/1: miscellaneous whitespace cleanupGeorge G. Davis
Patch from George G. Davis Fix leading, trailing and other miscellaneous whitespace issues in arch/arm/kernel/alignment.c. Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2970/1: Use -mtune=arm1136j-s when building for CPU_V6 targetsGeorge G. Davis
Patch from George G. Davis When building for CPU_V6 targets, we should use -mtune=arm1136j-s rather than -mtune=strongarm but fall back to the later in case someone is using an older toolchain (although they should really upgrade instead). Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2971/1: i.MX uart handle rts irqSascha Hauer
Patch from Sascha Hauer handle rts interrupt Signed-off-by: Giancarlo Formicuccia <giancarlo.formicuccia@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2979/2: S3C2410 - add static to non-exported machine itemsBen Dooks
Patch from Ben Dooks Do not export items that are not needed by symbol name elsewhere Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2977/1: armksyms.c - make items in export table staticBen Dooks
Patch from Ben Dooks The items in the export table do not need to be exported elsehwere, so quash the sparse warning by making the symbol for the table entry static. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2976/1: S3C2410: add static to functions in serial driverBen Dooks
Patch from Ben Dooks The s3c2410 serial driver is missing static declerations on several functions that are not exported, and have no need of being exported outside the driver Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2975/1: S3C2410: time.c missing include of cpu.hBen Dooks
Patch from Ben Dooks arch/arm/mach-s3c2410/time.c is missing include of cpu.h, causing the declaration of the timer struct (s3c24xx_timer) to be flagged as missing the declaration. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2974/1: fix ARM710 swi bug workaroundNicolas Pitre
Patch from Nicolas Pitre Either no one is using an ARM710 with recent kernels, or all ARM710s still in use are not afflicted by this swi bug. Nevertheless, the code to work around the ARM710 swi bug is itself currently buggy since it uses r8 as a pointer to S_PC while in fact it holds the spsr content these days. Fix that, and simplify the code as well. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[PATCH] ppc32: Tell userland about lack of standard TBBenjamin Herrenschmidt
Glibc is about to get some new high precision timer stuff that relies on the standard timebase of the PPC architecture. However, some (rare & old) CPUs do not have such timebase and it is a bit annoying to have your stuff just crash because you are running on the wrong CPU... This exposes to userland a CPU feature bit that tells that the current processor doesn't have a standard timebase. It's negative logic so that glibc will still "just work" on older kernels (it will just be unhappy on those old CPUs but that doesn't really matter as distro tend to update glibc & kernel at the same time). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-12[PATCH] ppc32: Fix timekeepingBenjamin Herrenschmidt
Interestingly enough, ppc32 had broken timekeeping for ages... It worked, but probably drifted a bit more than could be explained by the actual bad precision of the timebase calibration. We discovered that recently when somebody figured out that the common code was using CLOCK_TICK_RATE to correct the timekeeing, and ppc32 had a completely bogus value for it. This patch turns it into something saner. Probably not as good as doing something based on the actual timebase frequency precision but I'll leave that sort of math to others. This at least makes it better for the common HZ values. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-12[PATCH] uml: compile-time fix recent patchPaolo 'Blaisorblade' Giarrusso
Give an empty definition for clear_can_do_skas() when it is not needed. Thanks to Junichi Uekawa <dancer@netfort.gr.jp> for reporting the breakage and providing a fix (I re-fixed it in an IMHO cleaner way). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-12[PATCH] uml: revert block driver use of host AIOJeff Dike
The patch to use host AIO support that I submitted early after 2.6.13 exposed some problems in the block driver. I have fixes for these, but am not comfortable putting them into 2.6.14 at this late date. So, this patch reverts the use of host AIO. I will resubmit the original patch, plus fixes to the driver after 2.6.14 in order to get a reasonable amount of testing before they're exposed to the general public. Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
2005-10-11[SPARC64]: Fix net booting on Ultra5David S. Miller
We were not doing alignment properly when remapping the kernel image. What we want is a 4MB aligned physical address to map at KERNBASE. Mistakedly we were 4MB aligning the virtual address where the kernel initially sits, that's wrong. Instead, we should PAGE align the virtual address, then 4MB align the physical address result the prom gives to us. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-11Pull mbcs-init-sn-check into release branchTony Luck
2005-10-11[PATCH] Don't map the same page too muchHugh Dickins
Refuse to install a page into a mapping if the mapping count is already ridiculously large. You probably cannot trigger this on 32-bit architectures, but on a 64-bit setup we should protect against it. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11[PATCH] ppc64: Add R_PPC64_TOC16 module relocPeter Bergner
Newer gcc's are generating this relocation, so the module loader needs to handle it. Signed-off-by: Peter Bergner <bergner@vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11[PATCH] V4L: Enable s-video input on DViCO FusionHDTV5 LiteMichael Krufky
* bttv-cards.c: - Enable S-Video input on DViCO FusionHDTV5 Lite Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>