aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-24V4L/DVB (7650): git-dvb: Kconfig fixAndrew Morton
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7648): cx23885: Load any module dependencies accordinglySteven Toth
For boards that require the avcore (cx25840) to be active, ensure it gets loaded. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7647): Add support for the Hauppauge HVR-1700 digital modeSteven Toth
This adds support for DVB-T mode only, analog is not supported. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7646): cx25840: Ensure GPIO2 is correctly set for cx23885/7/8 based ↵Steven Toth
products cx25840: Ensure GPIO2 is correctly set for cx23885/7/8 based products. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7645): Add support for the Hauppauge HVR-1200Steven Toth
This adds support for DVB-T mode only, analog mode is not supported. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7644): Adding support for the NXP TDA10048HN DVB OFDM demodulatorSteven Toth
Adding support for the NXP TDA10048HN DVB OFDM demodulator Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7642): cx88: enable radio GPIO correctlySteven Toth
cx88: enable radio GPIO correctly. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7641): V4L: ov511 - use usb_interface as parent, not usb_deviceKay Sievers
The current code creates a bogus DEVPATH: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/video4linux/video0 while it should be: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/video4linux/video0 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7639): au8522: fix a small bug introduced by Checkpatch cleanupMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7638): CodingStyle fixes for au8522 and au0828Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7637): au0828: TypoSteven Toth
au0828: Typo Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7636): au0828: Add HVR850 model numberSteven Toth
au0828: Add HVR850 model number Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7635): au8522: CleanupSteven Toth
au8522: Cleanup Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7634): au0828: CleanupSteven Toth
au0828: Cleanup Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7633): au8522: consolidate mse2snr_lookup functionsMichael Krufky
consolidate au8522_qam256_mse2snr_lookup, au8522_qam64_mse2snr_lookup and au8522_vsb_mse2snr_lookup into a single function, au8522_mse2snr_lookup. Pass the mse2snr table into au8522_mse2snr_lookup depending on the modulation type. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7632): au8522: Added SNR support and basic cleanupSteven Toth
au8522: Added SNR support and basic cleanup Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7631): au8522: add function au8522_read_mseMichael Krufky
add function au8522_read_mse, which will be used to compute snr TO DO: mse2snr Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7630): au8522: fix au8522_read_ucblocks for qamMichael Krufky
ucblocks are reported in separate registers for vsb & qam Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7629): au8522: replace __FUNCTION__ with __func__Michael Krufky
replace __FUNCTION__ with __func__ and clean associated checkpatch.pl warnings. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7628): au8522: codingstyle cleanupsMichael Krufky
Fixed some checkpatch.pl warnings Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7627): au0828: replace __FUNCTION__ with __func__Michael Krufky
replace __FUNCTION__ with __func__ and clean associated checkpatch.pl warnings. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7626): Kconfig: VIDEO_AU0828 should select DVB_AU8522 and ↵Michael Krufky
DVB_TUNER_XC5000 VIDEO_AU0828 should select DVB_AU8522 and DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZE Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7625): au0828: CleanupSteven Toth
Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7624): Avoid an oops if the board is not fully definedSteven Toth
Avoid an oops if the board is not fully defined. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7623): Scripts to maintain the CARDLIST fileSteven Toth
Scripts to maintain the CARDLIST file. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7622): HVR950Q Hauppauge eeprom supportSteven Toth
HVR950Q Hauppauge eeprom support. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7621): Add support for Hauppauge HVR950Q/HVR850/FusioHDTV7-USBSteven Toth
Including support for the AU0828 USB Bridge. Including support for the AU8522 ATSC/QAM Demodulator. Including support for the AU8522 ATSC/QAM Demodulator. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7620): Adding support for a new i2c bridge typeSteven Toth
Adding support for a new i2c bridge type Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7619): em28xx: adds proper demod IF for HVR-900Mauro Carvalho Chehab
Thanks to Aidan Thornton <makosoft@googlemail.com> for helping to test this firmware Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7618): em28xx: make some symbols staticMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7617): Removes a manual mode setupMauro Carvalho Chehab
The setup is already done at open(). Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7616): em28xx-dvb: Properly selects digital mode at the right placeMauro Carvalho Chehab
The driver should be switched to digital mode, when trying to access the frontend or when streaming. This patch provides the correct code to support this feature. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7615): em28xx: Provide the proper support for switching between ↵Mauro Carvalho Chehab
analog/digital Before this patch, HVR900/HVR950 were incorreclty going back to analog. The result is that only digital were working. This patch provides the proper setup for analog/digital and tuner callback. It also properly resets analog into a sane state at open(). Thanks to Steven Toth <stoth@linuxtv.org> and Michael Krufky <mkrufky@linuxtv.org> for helping to set the proper parameters to GPO/GPIO em2883 ports. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7614): em28xx-core: fix some debug printk's that wrongly received ↵Mauro Carvalho Chehab
KERN_INFO Those printk's were adding more info to a line that were already being printed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7613): em28xx: rename registersMauro Carvalho Chehab
Now, all registers will follow the same convension: EM28XX_R<reg_number>_<reg_name> This allows to associate a register with its value, and also with a canonical name. Also, registers that are specific to a given chip were renamed accordingly, as EM2800_foo (for 2800 only registers) or EM2880_foo (for registers that started to appear on em2880). Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7612): em28xx-cards: use register names for GPIO/GPOMauro Carvalho Chehab
Before this patch, registers 0x04 and 0x08 were referenced by its value. This is bad, since makes harder for someone to understand what this is doing. This patch renames those two registers into an appropriate name. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7611): em28xx: Move registers to a separate fileMauro Carvalho Chehab
em28xx.h contains lots of different stuff inside. The better is to break it on some files. This patch removes the register names, moving them to a separate file. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7610): em28xx: Select reg wait time based on chip IDMauro Carvalho Chehab
This is more conservative than just removing the msleep() from em28xx_write_regs_req(), since some old hardware may still need it. So, it will remove the sleep time only for those chips where this removal were tested. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7609): em28xx-core: speed-up firmware loadDevin Heitmueller
em28xx-core.c: - Remove sleep in i2c message routine which slows down i2c by a factor 10x. Load time for BASE firmware went from 13s to .973s Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7608): em28xx-dvb: Some cleanups and fixesDevin Heitmueller
em28xx-dvb.c: - Remove unneeded xc3028_ctrl structure. The driver automatically preserves the previous value tuner-xc2028.c: - Make the return type for xc2028_get_reg signed, since all of the callers are looking for "< 0" to detect errors. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7607): CodingStyle fixesDouglas Schilling Landgraf
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7606): em28xx-dvb: Program GPO as wellMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7605): tuner-xc3028: Avoids too much firmware reloadsMauro Carvalho Chehab
xc3028_sleep function is being used with a different meaning. This should be called only before doing S1/S3 sleep. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7604): em28xx-dvb: Fix analog modeMauro Carvalho Chehab
The analog entries are wrong. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7603): em28xx-dvb: don't use videobuf-dvbAidan Thornton
Modifies em28xx-dvb not to use videobuf-dvb, but instead to include the code for registering dvb devices locally and use the URB management code in the em28xx driver directly. DVB data streaming should now work. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7602): em28xx: generalise URB setup codeAidan Thornton
Move the URB setup and management code to em28xx-core.c and generalise it slighlty so that the DVB code can use it. Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7601): em28xx-dvb: add support for the HVR-900Aidan Thornton
Adds the correct GPIOs and demod attach code for the HVR-900 Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7600): em28xx: Sets frequency when changing to analog modeMauro Carvalho Chehab
This will make tuner-xc2028 to change to analog, if needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7599): em28xx-dvb: videobuf callbacks are waiting for em28xx_fhMauro Carvalho Chehab
Thanks to Devin Heitmueller <devin.heitmueller@gmail.com> for pointing this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7598): em28xx: several fixes on gpio programmingDevin Heitmueller
em28xx-cards.c: - Fix reversed val/rst values in both analog_gpio and digital_gpio vectors - Fix crash that would was occurring during every analog startup while looping over gpio_ctl - Remove what appears to be a redundant setting of gpio_ctl->val - Don't use OREN538 demodulation for the HVR-950 (prevents ATSC scanning from working) em28xx-dvb.c: - Tuner should be in digital mode when issuing the reset - Add copyright - Change struct definition (corresponds to fix in em28xx-cards.c for gpio_ctl looping) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-30 23:23:56 +0000