aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-14libata: relocate sdev->manage_start_stop configurationTejun Heo
After 9b8e8de7, manage_start_stop configuration depends on valid ATA device. Move it into ata_scsi_dev_config(). This was detected by the coverity checker. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-14sata_sil24: freeze on non-dev errors reported via CERRTejun Heo
CERR reports errors detected during executing a command. This doesn't mean the error is tied to the command and can be recovered by just issuing it again. Many of the errors are fatal port-wide connditions including HSM violation, host bus error and ATA bus error and require freezing and port reset. The freezing part wasn't implemented previously. This used to be okay because port resets were scheduled anyway and EH eventually resets and recovers the port. With PMP support added, this is no longer true. The error condition and recover actions are attributed to the fan-out port and the host port condition isn't properly recovered leading to EH failures. This patch makes CERR errors which require resets to freeze the port. This will force host port reset and proper recovery. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Andrew Ryder <tireman@shaw.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-14sata_sil24: fix stupid typoTejun Heo
Fix stupid typo. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-14ata_piix: ignore ATA_DMA_ERR on vmware ich4Tejun Heo
VMware ich4 emulation incorrectly sets DMA_ERR on TF error. Ignore it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-14Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-sibyte: Fix an error path i2c: Driver IDs are optional i2c: Spelling fixes i2c-omap: Fix NULL pointer dereferencing
2008-01-14fix the "remove task_ppid_nr_ns" commitOleg Nesterov
Commit 84427eaef1fb91704c7112bdb598c810003b99f3 (remove task_ppid_nr_ns) moved the task_tgid_nr_ns(task->real_parent) outside of lock_task_sighand(). This is wrong, ->real_parent could be freed/reused. Both ->parent/real_parent point to nothing after __exit_signal() because we remove the child from ->children list, and thus the child can't be reparented when its parent exits. rcu_read_lock() protects ->parent/real_parent, but _only_ if we know it was valid before we take rcu lock. Revert this part of the patch. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14i2c-sibyte: Fix an error pathJean Delvare
If the registration of the second I2C channel fails, we really want to unregister the first one before we return with an error. While we're here, fix the printk right above so that it displays the real driver name. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ralf Baechle <ralf@linux-mips.org>
2008-01-14i2c: Driver IDs are optionalJean Delvare
Document the fact that I2C driver IDs are optional. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-14i2c: Spelling fixesJoe Perches
[JD: One more fix in i2c-dev.] Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-14i2c-omap: Fix NULL pointer dereferencingTony Lindgren
This patch fixes bug #9581 reported by Marcio Buss. If kzalloc fails, omap_i2c_write_reg() tries to reset an unallocated I2C controller. Cc: Marcio Buss <marciobuss@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: improve Kconfig help entries for HP Jornada devices Input: pass EV_PWR events to event handlers Input: spitzkbd - fix suspend key handling gameport: don't export functions that are static inline Input: jornada680_kbd - fix default keymap Input: Handle EV_PWR type of input caps in input_set_capability.
2008-01-14OSS msnd: fix array overflowsAdrian Bunk
Fix array overflows in the OSS msnd driver spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14CRIS v10: driver for ds1302 needs to include cris-specific i2c.hJesper Nilsson
This fixes compilation error where i2c_init wasn't defined. Also, remove the CVS log and version tags, they are no longer useful. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14uvesafb: fix section mismatch warningsRandy Dunlap
Mark uvesafb_init_mtrr() as __devinit since its caller is __devinit and since it accesses __devinitdata. WARNING: vmlinux.o(.text+0x4df80e): Section mismatch: reference to .init.data: (between 'uvesafb_init_mtrr' and 'uvesafb_show_vbe_ver') Variable 'blank' cannot be __devinitdata since it is referenced in an fb_ops method that could be called at any time. WARNING: vmlinux.o(.text+0x4dfc1e): Section mismatch: reference to .init.data:blank (between 'param_set_scroll' and 'vesa_setpalette') WARNING: vmlinux.o(.text+0x4dfc24): Section mismatch: reference to .init.data:blank (between 'param_set_scroll' and 'vesa_setpalette') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14CRIS v10: kernel/time.c needs to include linux/vmstat.h to compileJesper Nilsson
This fixes compile error when nr_free_pages() from linux/swap.h expands to global_page_state(NR_FREE_PAGES), but linux/vmstat.h isn't included to declare global_page_state(). Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14CRIS v10: correct do_signal to fix oops and clean up signal handling in generalJesper Nilsson
This fixes a kernel panic on boot due to do_signal not being compatible with it's callers. - do_signal now returns void, and does not have the previous signal set as a parameter. - Remove sys_rt_sigsuspend, we can use the common one instead. - Change sys_sigsuspend to be more like x86, don't call do_signal here. - handle_signal, setup_frame and setup_rt_frame now return -EFAULT if we've delivered a segfault, which is used by callers to perform necessary cleanup. - Break long lines, correct whitespace and formatting errors. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14CRIS: define __ARCH_WANT_SYS_RT_SIGSUSPEND in unistd.h for CRISJesper Nilsson
This allows us to use the commong sys_rt_sigsuspend instead of having our own. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14s3c2410fb: fix incorrect argument type in resume functionKrzysztof Helt
Fix wrong pointer type passed into the s3c2410fb_init_registers() function. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14hugetlbfs: fix quota leakKen Chen
In the error path of both shared and private hugetlb page allocation, the file system quota is never undone, leading to fs quota leak. Fix them up. [akpm@linux-foundation.org: cleanup, micro-optimise] Signed-off-by: Ken Chen <kenchen@google.com> Acked-by: Adam Litke <agl@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14advansys: fix section mismatch warningRandy Dunlap
Fix section mismatch warning: WARNING: vmlinux.o(.exit.text+0x152a): Section mismatch: reference to .init.data:_asc_def_iop_base (between 'advansys_isa_remove' and 'advansys_exit') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Matthew Wilcox <willy@debian.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14cciss: section mismatchRandy Dunlap
Mark cciss_pci_init() as __devinit, to fix section mismatch warning. WARNING: vmlinux.o(.text+0x601fc9): Section mismatch: reference to .init.text: (between 'cciss_pci_init' and 'cciss_getgeometry') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <mike.miller@hp.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14scsi/qla2xxx/qla_os.c section fixAdrian Bunk
WARNING: vmlinux.o(.text+0x2a4462): Section mismatch: reference to .exit.text:qla2x00_remove_one (between 'qla2xxx_pci_error_detected' and 'qla2x00_stop_timer') qla2x00_remove_one() mustn't be __devexit since it's called from qla2xxx_pci_error_detected(). Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Seokmann Ju <seokmann.ju@qlogic.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14macintosh: fix fabrication of caplock key eventsAndy Wingo
If the user has turned on the "restore_caplock_events" parameter, the code mangles the capslock events correctly, then erroneously ignores those events. Fix logic to allow correct fallthrough. Signed-off-by: Andy Wingo <wingo@pobox.com> Acked-by: Andrew McNabb <amcnabb@mcnabbs.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14quicklists: Only consider memory that can be used with GFP_KERNELChristoph Lameter
Quicklists calculates the size of the quicklists based on the number of free pages. This must be the number of free pages that can be allocated with GFP_KERNEL. node_page_state() includes the pages in ZONE_HIGHMEM and ZONE_MOVABLE which may lead the quicklists to become too large causing OOM. Signed-off-by: Christoph Lameter <clameter@sgi.com> Tested-by: Dhaval Giani <dhaval@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14MAINTAINERS: email update and add missing entryNicolas Ferre
- MAINTAINERS email update - add atmel_lcdfb entry Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14TPM: fix suspend and resume failureDavid Smith
The savestate command structure was being overwritten by the result of running the TPM_SaveState command after one run, so make it a local variable to the function instead of a global variable that gets overwritten. Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Kent Yoder <shpedoikal@gmail.com> Cc: Marcel Selhorst <tpm@selhorst.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14Kick CPUS that might be sleeping in cpus_idle_waitSteven Rostedt
Sometimes cpu_idle_wait gets stuck because it might miss CPUS that are already in idle, have no tasks waiting to run and have no interrupts going to them. This is common on bootup when switching cpu idle governors. This patch gives those CPUS that don't check in an IPI kick. Background: ----------- I notice this while developing the mcount patches, that every once in a while the system would hang. Looking deeper, the hang was always at boot up when registering init_menu of the cpu_idle menu governor. Talking with Thomas Gliexner, we discovered that one of the CPUS had no timer events scheduled for it and it was in idle (running with NO_HZ). So the CPU would not set the cpu_idle_state bit. Hitting sysrq-t a few times would eventually route the interrupt to the stuck CPU and the system would continue. Note, I would have used the PDA isidle but that is set after the cpu_idle_state bit is cleared, and would leave a window open where we may miss being kicked. hmm, looking closer at this, we still have a small race window between clearing the cpu_idle_state and disabling interrupts (hence the RFC). CPU0: CPU 1: --------- --------- cpu_idle_wait(): cpu_idle(): | __cpu_cpu_var(is_idle) = 1; | if (__get_cpu_var(cpu_idle_state)) /* == 0 */ per_cpu(cpu_idle_state, 1) = 1; | if (per_cpu(is_idle, 1)) /* == 1 */ | smp_call_function(1) | | receives ipi and runs do_nothing. wait on map == empty idle(); /* waits forever */ So really we need interrupts off for most of this then. One might think that we could simply clear the cpu_idle_state from do_nothing, but I'm assuming that cpu_idle governors can be removed, and this might cause a race that a governor might be used after the module was removed. Venki said: I think your RFC patch is the right solution here. As I see it, there is no race with your RFC patch. As long as you call a dummy smp_call_function on all CPUs, we should be OK. We can get rid of cpu_idle_state and the current wait forever logic altogether with dummy smp_call_function. And so there wont be any wait forever scenario. The whole point of cpu_idle_wait() is to make all CPUs come out of idle loop atleast once. The caller will use cpu_idle_wait something like this. // Want to change idle handler - Switch global idle handler to always present default_idle - call cpu_idle_wait so that all cpus come out of idle for an instant and stop using old idle pointer and start using default idle - Change the idle handler to a new handler - optional cpu_idle_wait if you want all cpus to start using the new handler immediately. Maybe the below 1s patch is safe bet for .24. But for .25, I would say we just replace all complicated logic by simple dummy smp_call_function and remove cpu_idle_state altogether. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@suse.de> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14w1: decrement slave counter only in ->release() callbackEvgeniy Polyakov
Decrement the slave counter only in ->release() callback instead of both in ->release() and w1 control. Patch is based on debug work and preliminary patch made by Henri Laakso. Henri noticed in debug that this counter becomes negative after w1 slave device is physically removed. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Henri Laakso <henri.laakso@wapice.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14modules: de-mutex more symbol lookup paths in the module codeRusty Russell
Kyle McMartin reports sysrq_timer_list_show() can hit the module mutex from hard interrupt context. These paths don't need to though, since we long ago changed all the module list manipulation to occur via stop_machine(). Disabling preemption is enough. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu> Cc: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14Input: improve Kconfig help entries for HP Jornada devicesKristoffer Ericson
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-13Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] vfp: fix fuitod/fsitod instructions [ARM] pxa: silence warnings from cpu_is_xxx() macros
2008-01-13Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: spidernet MAINTAINERship update sky2: remove check for PCI wakeup setting from BIOS sky2: large memory workaround. fs_enet: check for phydev existence in the ethtool handlers [usb netdev] asix: fix regression r8169: fix missing loop variable increment ip1000: menu location change Fixed a small typo in the loopback driver 3c509: PnP resource management fix netxen: fix byte-swapping in tx and rx netxen: optimize tx handling netxen: stop second phy correctly netxen: update driver version netxen: update MAINTAINERS endianness noise in tulip_core de4x5 fixes xircom_cb endianness fixes rt2x00: Put 802.11 data on 4 byte boundary rt2x00: Corectly initialize rt2500usb MAC rt2x00: Allow rt61 to catch up after a missing tx report
2008-01-13Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix CPU hotplug when using the SLB shadow buffer [POWERPC] efika: add phy-handle property for fec_mpc52xx
2008-01-13Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: pnpacpi: print resource shortage message only once PM: ACPI and APM must not be enabled at the same time ACPI: apply quirk_ich6_lpc_acpi to more ICH8 and ICH9 ACPICA: fix acpi_serialize hang regression ACPI : Not register gsi for PCI IDE controller in legacy mode ACPI: Reintroduce run time configurable max_cstate for !CPU_IDLE case ACPI: Make sysfs interface in ACPI power optional. ACPI: EC: Enable boot EC before bus_scan increase PNP_MAX_PORT to 40 from 24
2008-01-13knfsd: Allow NFSv2/3 WRITE calls to succeed when krb5i etc is used.NeilBrown
When RPCSEC/GSS and krb5i is used, requests are padded, typically to a multiple of 8 bytes. This can make the request look slightly longer than it really is. As of f34b95689d2ce001c "The NFSv2/NFSv3 server does not handle zero length WRITE request correctly", the xdr decode routines for NFSv2 and NFSv3 reject requests that aren't the right length, so krb5i (for example) WRITE requests can get lost. This patch relaxes the appropriate test and enhances the related comment. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Cc: Peter Staubach <staubach@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-13remove task_ppid_nr_nsRoland McGrath
task_ppid_nr_ns is called in three places. One of these should never have called it. In the other two, using it broke the existing semantics. This was presumably accidental. If the function had not been there, it would have been much more obvious to the eye that those patches were changing the behavior. We don't need this function. In task_state, the pid of the ptracer is not the ppid of the ptracer. In do_task_stat, ppid is the tgid of the real_parent, not its pid. I also moved the call outside of lock_task_sighand, since it doesn't need it. In sys_getppid, ppid is the tgid of the real_parent, not its pid. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-12Pull bugzilla-9535 into release branchLen Brown
2008-01-12pnpacpi: print resource shortage message only onceLen Brown
pnpacpi: exceeded the max number of IO resources: 40 While this message is a real error and should thus remain KERN_ERR (even a new dmesg line is seen as a regression by some, since it was not printed in 2.6.23...) it is certainly impolite to print this warning 50 times should you happen to have the oddball system with 90 io resources under a device... So print the warning just once. In 2.6.25 we'll get rid of the limits altogether and these warnings will vanish with them. http://bugzilla.kernel.org/show_bug.cgi?id=9535 Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-12spidernet MAINTAINERship updateJens Osterkamp
Acked-by: Linas Vepstas <linasvepstas@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12sky2: remove check for PCI wakeup setting from BIOSStephen Hemminger
The driver checks status of PCI power management to mark default setting of Wake On Lan. On some systems this works, but often it reports a that WOL is disabled when it isn't. This patch gets rid of that check and just reports the wake on lan status based on the hardware capablity. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12sky2: large memory workaround.Stephen Hemminger
This patch might fix problems with 4G or more of memory. It stops the driver from doing a small optimization for Tx and Rx, and instead always sets the high-page on tx/rx descriptors. Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=9725 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12Use access mode instead of open flags to determine needed permissionsLinus Torvalds
Way back when (in commit 834f2a4a1554dc5b2598038b3fe8703defcbe467, aka "VFS: Allow the filesystem to return a full file pointer on open intent" to be exact), Trond changed the open logic to keep track of the original flags to a file open, in order to pass down the the intent of a dentry lookup to the low-level filesystem. However, when doing that reorganization, it changed the meaning of namei_flags, and thus inadvertently changed the test of access mode for directories (and RO filesystem) to use the wrong flag. So fix those test back to use access mode ("acc_mode") rather than the open flag ("flag"). Issue noticed by Bill Roman at Datalight. Reported-and-tested-by: Bill Roman <bill.roman@datalight.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-12fs_enet: check for phydev existence in the ethtool handlersAnton Vorontsov
Otherwise oops will happen if ethernet device has not been opened: Unable to handle kernel paging request for data at address 0x0000014c Faulting instruction address: 0xc016f7f0 Oops: Kernel access of bad area, sig: 11 [#1] MPC85xx NIP: c016f7f0 LR: c01722a0 CTR: 00000000 REGS: c79ddc70 TRAP: 0300 Not tainted (2.6.24-rc3-g820a386b) MSR: 00029000 <EE,ME> CR: 20004428 XER: 20000000 DEAR: 0000014c, ESR: 00000000 TASK = c789f5e0[999] 'snmpd' THREAD: c79dc000 GPR00: c01aceb8 c79ddd20 c789f5e0 00000000 c79ddd3c 00000000 c79ddd64 00000000 GPR08: 00000000 c7845b60 c79dde3c c01ace80 20004422 200249fc 000002a0 100da728 GPR16: 100c0000 00000000 00000000 00000000 20022078 00000009 200220e0 bfc85558 GPR24: c79ddd3c 00000000 00000000 c02e0e70 c022fc64 ffffffff c7845800 bfc85498 NIP [c016f7f0] phy_ethtool_gset+0x0/0x4c LR [c01722a0] fs_get_settings+0x18/0x28 Call Trace: [c79ddd20] [c79dde38] 0xc79dde38 (unreliable) [c79ddd30] [c01aceb8] dev_ethtool+0x294/0x11ec [c79dde30] [c01aaa44] dev_ioctl+0x454/0x6a8 [c79ddeb0] [c019b9d4] sock_ioctl+0x84/0x230 [c79dded0] [c007ded8] do_ioctl+0x34/0x8c [c79ddee0] [c007dfbc] vfs_ioctl+0x8c/0x41c [c79ddf10] [c007e38c] sys_ioctl+0x40/0x74 [c79ddf40] [c000d4c0] ret_from_syscall+0x0/0x3c Instruction dump: 81630000 800b0030 2f800000 419e0010 7c0803a6 4e800021 7c691b78 80010014 7d234b78 38210010 7c0803a6 4e800020 <8003014c> 7c6b1b78 38600000 90040004 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2008-01-12[usb netdev] asix: fix regressionRuss Dill
51bf2976b55d07f9daae9697a0a3ac9f58abcedc caused a regression in the asix usbnet driver. usb_control_msg returns the number of bytes read on success, not 0. Tested with NETGEAR FA120. Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12r8169: fix missing loop variable incrementFrancois Romieu
Spotted-by: Citizen Lee <citizen_lee@thecus.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12ip1000: menu location changeStephen Hemminger
Move the ip1000 driver into the expected place for gigabit cards in the configuration menu structure. It should be under the gigabit cards, not at the top level. Signed-off-by: Stephen Hemminger <stephen.hemminger@vyatta.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12Fixed a small typo in the loopback driverEmil Medve
This is probably a result of the changes from commit 854d836 - [NET]: Dynamically allocate the loopback device, part 2 Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-123c509: PnP resource management fixKrzysztof Helt
In order to release PnP resources a card type must be set to EL3_PNP. Previously, it was never set hence the PnP resources were not released and device was left in incorrect state. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-12netxen: fix byte-swapping in tx and rxDhananjay Phadke
Here's the reworked patch. This cleans up some unnecessary byte-swapping while setting up tx and interpreting rx desc. The 64 bit rx status data should be converted to host endian format only once and the macros just need to extract bitfields. This saves a spate of interrupts on pseries blades caused by buggy (non) processing rx status ring. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 05:54:19 +0000