aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-04-30cfq-iosched: rework the whole round-robin list conceptJens Axboe
Drawing on some inspiration from the CFS CPU scheduler design, overhaul the pending cfq_queue concept list management. Currently CFQ uses a doubly linked list per priority level for sorting and service uses. Kill those lists and maintain an rbtree of cfq_queue's, sorted by when to service them. This unfortunately means that the ionice levels aren't as strong anymore, will work on improving those later. We only scale the slice time now, not the number of times we service. This means that latency is better (for all priority levels), but that the distinction between the highest and lower levels aren't as big. The diffstat speaks for itself. cfq-iosched.c | 363 +++++++++++++++++--------------------------------- 1 file changed, 125 insertions(+), 238 deletions(-) Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30cfq-iosched: minor updatesJens Axboe
- Move the queue_new flag clear to when the queue is selected - Only select the non-first queue in cfq_get_best_queue(), if there's a substantial difference between the best and first. - Get rid of ->busy_rr - Only select a close cooperator, if the current queue is known to take a while to "think". Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30cfq-iosched: development updateJens Axboe
- Implement logic for detecting cooperating processes, so we choose the best available queue whenever possible. - Improve residual slice time accounting. - Remove dead code: we no longer see async requests coming in on sync queues. That part was removed a long time ago. That means that we can also remove the difference between cfq_cfqq_sync() and cfq_cfqq_class_sync(), they are now indentical. And we can kill the on_dispatch array, just make it a counter. - Allow a process to go into the current list, if it hasn't been serviced in this scheduler tick yet. Possible future improvements including caching the cfqq lookup in cfq_close_cooperator(), so we don't have to look it up twice. cfq_get_best_queue() should just use that last decision instead of doing it again. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-30cfq-iosched: improve preemption for cooperating tasksJens Axboe
When testing the syslet async io approach, I discovered that CFQ sometimes didn't perform as well as expected. cfq_should_preempt() needs to better check for cooperating tasks, so fix that by allowing preemption of an equal priority queue if the recently queued request is as good a candidate for IO as the one we are currently waiting for. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-04-27Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: sis900: Allocate rx replacement buffer before rx operation usb-net/pegasus: simplify carrier detection
2007-04-27sis900: Allocate rx replacement buffer before rx operationNeil Horman
Just found a hole in my last patch. It was reported to me that shortly after we integrated this patch. The report was of an oops that took place inside of netif_rx when using the sis900 driver. Looking at my origional patch I noted that there was a spot between the new skb_alloc and the refill_rx_ring label where skb got reassigned to the pointer currently held in the rx_ring for the purposes of receiveing the frame. The result of this is however that the buffer that gets passed to netif_rx (if it is called), then gets placed right back into the rx_ring. So if you receive frames fast enough the skb being processed by the network stack can get corrupted. The reporter is testing out the fix I've written for this below (I'm not near my hardware at the moment to test myself), but I wanted to post it for review ASAP. I'll post test results when I hear them, but I think this is a pretty straightforward fix. It just uses a separate pointer to do the rx operation, so that we don't improperly reassign the pointer that we use to refill the rx ring. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-27usb-net/pegasus: simplify carrier detectionDan Williams
Simplify pegasus carrier detection; rely only on the periodic MII polling. Reverts pieces of c43c49bd61fdb9bb085ddafcaadb17d06f95ec43. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-27Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SCSI] esp_scsi.c: Fix compilation.
2007-04-27Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: Fix networking compilation errors [AF_RXRPC/AFS]: Arch-specific fixes. [AFS]: Fix VLocation record update wakeup [NET]: Revert sk_buff walker cleanups.
2007-04-27Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (46 commits) [MTD] [MAPS] drivers/mtd/maps/ck804xrom.c: convert pci_module_init() [MTD] [NAND] CM-x270 MTD driver [MTD] [NAND] Wrong calculation of page number in nand_block_bad() [MTD] [MAPS] fix plat-ram printk format [JFFS2] Fix compr_rubin.c build after include file elimination. [JFFS2] Handle inodes with only a single metadata node with non-zero isize [JFFS2] Tidy up licensing/copyright boilerplate. [MTD] [OneNAND] Exit loop only when column start with 0 [MTD] [OneNAND] Fix access the past of the real oobfree array [MTD] [OneNAND] Update Samsung OneNAND official URL [JFFS2] Better fix for all-zero node headers [JFFS2] Improve read_inode memory usage, v2. [JFFS2] Improve failure mode if inode checking leaves unchecked space. [JFFS2] Fix cross-endian build. [MTD] Finish conversion mtd_blkdevs to use the kthread API [JFFS2] Obsolete dirent nodes immediately on unlink, where possible. Use menuconfig objects: MTD [MTD] mtd_blkdevs: Convert to use the kthread API [MTD] Fix fwh_lock locking [JFFS2] Speed up mount for directly-mapped NOR flash ...
2007-04-27[MTD] [MAPS] drivers/mtd/maps/ck804xrom.c: convert pci_module_init()Adrian Bunk
This patch converts the pci_module_init() usage to pci_register_driver(). It's currently #if 0'ed, but still not a bad idea to change it. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27[NET]: Fix networking compilation errorsDavid Howells
Fix miscellaneous networking compilation errors. (*) Export ktime_add_ns() for modules. (*) wext_proc_init() should have an ANSI declaration. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27[AF_RXRPC/AFS]: Arch-specific fixes.David Howells
Fixes for various arch compilation problems: (*) Missing module exports. (*) Variable name collision when rxkad and af_rxrpc both built in (rxrpc_debug). (*) Large constant representation problem (AFS_UUID_TO_UNIX_TIME). (*) Configuration dependencies. (*) printk() format warnings. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27[AFS]: Fix VLocation record update wakeupDavid Howells
Fix the wakeup transitions after a VLocation record update completes one way or another. This builds on Dave Miller's partial fix. Also move wakeups outside the spinlocked sections. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27[NET]: Revert sk_buff walker cleanups.David S. Miller
This reverts eefa3906283a2b60a6d02a2cda593a7d7d7946c5 The simplification made in that change works with the assumption that the 'offset' parameter to these functions is always positive or zero, which is not true. It can be and often is negative in order to access SKB header values in front of skb->data. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27[SCSI] esp_scsi.c: Fix compilation.Alexey Dobriyan
irqreturn.h for irqreturn_t and dma_addr_t being u128 warnings ;-) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-27[MTD] [NAND] CM-x270 MTD driverMike Rapoport
This patch provides MTD support for NAND flash devices on CM-x270 modules. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (78 commits) USB: update MAINAINERS and CREDITS for Freescale USB driver USB: update gadget files for fsl_usb2_udc driver USB: add Freescale high-speed USB SOC device controller driver USB: quirk for broken suspend of IT8152F/G USB: iowarrior.c: timeouts too small in usb_control_msg calls USB: dell device id for option.c USB: Remove Huawei unusual_devs entry USB: CP2101 New Device IDs USB: add picdem device to ldusb usbfs micro optimitation USB: remove ancient/broken CRIS hcd usb ethernet gadget, workaround network stack API glitch USB: add "busnum" attribute for USB devices USB: cxacru: ADSL state management usbatm: Detect usb device shutdown and ignore failed urbs USB: Remove duplicate define of OHCI_QUIRK_ZFMICRO USB: BandRich BandLuxe HSDPA Data Card Driver USB gadget rndis: fix struct rndis_packet_msg_type unaligned bug USB Elan FTDI: check for driver registration status USB: sierra: add more checks on shutdown ...
2007-04-27Merge branch 'master' of ↵Linus Torvalds
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (184 commits) V4L/DVB (5563): Radio-maestro.c Replace radio_ioctl to use video_ioctl2 V4L/DVB (5562): Radio-gemtek-pci.c Replace gemtek_pci_ioctl to use video_ioctl2 V4L/DVB (5560): Ivtv: fix incorrect bitwise-and for command flags. V4L/DVB (5558): Opera: use 7-bit i2c addresses V4L/DVB (5557): Cafe_ccic: check return value of pci_enable_device V4L/DVB (5556): Radio-gemtek.c Replace gemtek_ioctl to use video_ioctl2 V4L/DVB (5555): Radio-aimslab.c Replace rt_ioctl to use video_ioctl2 V4L/DVB (5554): Fix: vidioc_g_parm were not zeroing the memory V4L/DVB (5553): Replace typhoon_do_ioctl to use video_ioctl2 V4L/DVB (5552): Plan-b: Switch to refcounting PCI API V4L/DVB (5551): Plan-b: header change V4L/DVB (5550): Radio-sf16fmi.c Replace fmi_do_ioctl to use video_ioctl2 V4L/DVB (5549): Radio-sf16fmr2.c Replace fmr2_do_ioctl to use video_ioctl2 V4L/DVB (5548): Fix v4l2 buffer to the length V4L/DVB (5547): Add ENUM_FRAMESIZES and ENUM_FRAMEINTERVALS ioctls V4L/DVB (5546): Radio-terratec.c Replace tt_do_ioctl to use video_ioctl2 V4L/DVB (5545): Saa7146: Release capture buffers on device close V4L/DVB (5544): Budget-av: Make inversion setting configurable, add KNC ONE V1.0 card V4L/DVB (5543): Tda10023: Add support for frontend TDA10023 V4L/DVB (5542): Budget-av: Remove polarity switching of the clock for DVB-C ...
2007-04-27USB: update MAINAINERS and CREDITS for Freescale USB driverLi Yang
Add MAINAINERS and CREDITS entry for Freescale Highspeed USB device driver. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: update gadget files for fsl_usb2_udc driverLi Yang
Update gadget_chip.c, ether.c for newly added Freescale Highspeed USB device driver. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add Freescale high-speed USB SOC device controller driverLi Yang
Freescale high-speed USB SOC can be found on some Freescale processors among different architectures. It supports both host and device functions. This driver adds its device support for Linux USB Gadget layer. It is tested on MPC8349 and MPC8313, but should work on other platforms with minor tweaks. The driver passed USBCV 1.3 compliance tests. Note that this driver doesn't yet include OTG support. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jiang Bo <tanya.jiang@freescale.com> Signed-off-by: Bruce Schmid <duck@freescale.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: quirk for broken suspend of IT8152F/GRaphael Assenat
Here's a patch which adds my device to the list. This patch enables the broken suspend quirk for the PCI OHCI controller present in the IT8152F/G RISC-to-PCI Companion Chip. Signed-off-by: Raphael Assenat <raph@8d.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: iowarrior.c: timeouts too small in usb_control_msg callsEberhard Fahle
The driver uses usb_control_msg() for exchanging data with the device. When the driver lived freeley _outside_ the kernel tree (pre 2.6.21) the timeouts for these calls where set to 5*HZ for reading, 1HZ for writing. (These timeouts seemed to work fine for all users of the driver, at least nobody complained in the last 2 years. The current code (2.6.21-rc5) removed the 'HZ' from the timeouts and left the driver with 5 jiffies for reading and 1 jiffy for writing. My new machine is fast, but not that fast. The patch also removes a useless debug statement, which was left over from testing a broken firmware version From: Eberhard Fahle <e.fahle@wayoda.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: dell device id for option.cHans Engelen
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: Remove Huawei unusual_devs entryPhil Dibowitz
Per the Rui Santos and the hardware manufacturers, this actually inhibits useful parts of the hardware. The correct way to use this hardware is with the software at http://www.kanoistika.sk/bobovsky/archiv/umts/ and the manufacturers are also planning on including Linux drivers/material in future revisions. CC: Rui Santos <rsantos@grupopie.com> CC: <johann.wilhelm@student.tugraz.at> CC: <zihan@huawei.com> CC: <wanganyu1983@huawei.com> CC: <dingjianjian@huawei.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: CP2101 New Device IDsCraig Shelley
Two new device IDs for CP2101 driver. Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add picdem device to ldusbJoey Goncalves
Hi Greg: I have found that /drivers/usb/misc/ldusb.c works with the "PICDEM Full Speed USB" http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en021940 Signed-off-by: Joey S Goncalves <jgoncalves@peragrin.com> Cc: Michael Hund <MHund@LD-Didactic.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usbfs micro optimitationOliver Neukum
the memory barrier is needed only with smp. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: remove ancient/broken CRIS hcdDavid Brownell
Remove the old crisv10 HCD ... it can't have built for some time, doesn't even have a Kconfig entry, was the last driver not to have been converted to the "hcd" framework, and considering the usbcore changes since its last patch was merged, has just got to buggy as all get-out. I'm told Axis has a new driver, and will be submitting it soon. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Mikael Starvik <mikael.starvik@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usb ethernet gadget, workaround network stack API glitchErik Hovland
Another workaround for the glitch in the network layer, whereby one call ignores the (otherwise kernel-wide) convention that free() calls should not oops when passed nulls. This code already handles that API glitch in most other paths. From: Erik Hovland <erik@hovland.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add "busnum" attribute for USB devicesAlan Stern
This patch (as903) adds a "busnum" sysfs attribute for USB devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: cxacru: ADSL state managementSimon Arlott
The device has commands to start/stop the ADSL function, so this adds a sysfs attribute to allow it to be started/stopped/restarted. It also stops polling the device for status when the ADSL function is disabled. There are no problems with sending multiple start or stop commands, even with a fast loop of them the device still works. There is no need to protect the restart process from further user actions while it's waiting for 1.5s. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usbatm: Detect usb device shutdown and ignore failed urbsSimon Arlott
Detect usb device shutdown and ignore failed urbs. This happens when the driver is unloaded or the device is unplugged. I'm not sure what other urb statuses should be ignored, and the warning message doesn't need to be shown when the module is unloaded or the device is removed. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Duncan Sands <duncan.sands@math.u-psud.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: Remove duplicate define of OHCI_QUIRK_ZFMICROS.Caglar Onur
Remove duplicate define of OHCI_QUIRK_ZFMICRO from ftdi-elan.c, its already defined in drivers/ush/host/ohci.c Signed-off-by: "S.Caglar Onur" <caglar@pardus.org.tr> Cc: <tony.olech@elandigitalsystems.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: BandRich BandLuxe HSDPA Data Card DriverLeon Leong
Add the detection for the BandRich BandLuxe C100/C100S/C120 HSDPA Data Card. With the vendor and product IDs are set properly, the data card can be detected and works fine. Signed-off-by: Leon Leong <upleong@bandrich.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB gadget rndis: fix struct rndis_packet_msg_type unaligned bugWu, Bryan
skb_push function may return a pointer which is not aligned as required by struct rndis_packet_msg_type. Using attribute trick to fix this bug. Signed-off-by: Roy Huang <roy.huang@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB Elan FTDI: check for driver registration statusCyrill Gorcunov
Add checking of driver registration status and release allocated resources if it failed. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: "Luiz Fernando N. Capitulino" <lcapitulino@mandriva.com.br> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: sierra: add more checks on shutdownGreg Kroah-Hartman
This should help with any potential NULL pointer usages as reported by a few users. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add an ohci board-specific quirkDavid Brownell
Use the new ohci-pci quirk infrastructure to address the problem it was created to address: a quirk specific to the Portege 4000, in buzilla as http://bugzilla.kernel.org/show_bug.cgi?id=6723 Also fix a misuse of "__devinit" for the quirk functions. It must not be used without first ensuring that the references from the quirk tables are gone, and that the function using those quirk tables is also gone. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: usbnet reports minidriver name through ethtoolDavid Brownell
Update "usbnet" so that ethtool reports the name of the minidriver in use (e.g. asix, cdc_ether, dm9601, rndis_host) instead of "usbnet". This is a better match to how other network drivers work, resolving a minor open issue. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: rndis_host, various cleanupsDavid Brownell
Cleanups to the rndis_host code, and a tweak that helps talking to PXA hardware. Mostly from Ole André Vadla Ravnås <oleavr@gmail.com> - Prevent SET_INTERFACE requests, they give PXA hardware bad indigestion - For paranoia, null a pointer after freeing its data - Wrap up ActiveSync oddities for RNDIS_QUERY in one routine - Use that wrapper when getting the Ethernet address - Whitespace fixes Plus add a comment noting the open issues about some RNDIS clients still needing TBD kinds of browbeating to accept non-jumbogram packets. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: <linux/usb/ch9.h> minor doc updateDavid Brownell
Minor doc update to <linux/usb/ch9.h> ... say where USB_DT_CS_* came from and update the definitions to match how they're derived there. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix signed jiffies issue in autosuspend logicAlan Stern
This patch (as897) changes the autosuspend timer code to use the standard types and macros in dealing with jiffies values. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27usbmon: bus zeroPete Zaitcev
Add the "bus zero" feature to the usbmon. If a user process specifies bus with number zero, it receives events from all buses. This is useful when we wish to see initial enumeration when a bus is created, typically after a modprobe. Until now, an application had to loop until a new bus could be open, then start capturing on it. This procedure was cumbersome and could lose initial events. Also, often it's too bothersome to find exactly to which bus a specific device is attached. Paolo Albeni provided the original concept implementation. I added the handling of "bus->monitored" flag and generally fixed it up. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: Allow transfer_buffer with transfer_dmaTony Lindgren
Some host controller drivers may need a PIO fallback when a DMA channel is temporarily unavailable. This patch provides an address that such drivers can use for PIO in those cases, and nulls that field out when no such address is available (highmem) which should help usbmon. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: cleanup ofd adutuxOliver Neukum
this driver does - ignore errors during open - submit a running urb - use down_interruptible not handling signals - GFP_KERNEL with a spinlock held Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: add "last_busy" field for use in autosuspendAlan Stern
This patch (as877) adds a "last_busy" field to struct usb_device, for use by the autosuspend framework. Now if an autosuspend call comes at a time when the device isn't busy but hasn't yet been idle for long enough, the timer can be set to exactly the desired value. And we will be ready to handle things like HID drivers, which can't maintain a useful usage count and must rely on the time-of-last-use to decide when to autosuspend. The patch also makes some related minor improvements: Move the calls to the autosuspend condition-checking routine into usb_suspend_both(), which is the only place where it really matters. If the autosuspend timer is already running, don't stop and restart it. Replace immediate returns with gotos so that the optional debugging ouput won't be bypassed. If autoresume is disabled but the device is already awake, don't return an error for an autoresume call. Don't try to autoresume a device if it isn't suspended. (Yes, this undercuts the previous change -- so sue me.) Don't duplicate existing code in the autosuspend work routine. Fix the kerneldoc in usb_autopm_put_interface(): If an autoresume call fails, the usage counter is left unchanged. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: whiteheat: Convert to generic booleanRichard Knutsson
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Acked-by: Stuart MacDonald <stuartm@connecttech.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27USB: fix omninet write vs. close raceOliver Neukum
omninet kills all URBs in close. However write() returns as soon as the URB has been submitted. Killing the last URB means a race that can lose that date written in the last call to write(). As a fix this is moved to shutdown(). Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 12:53:07 +0000