aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-01-31[PATCH] PCI Hotplug/powerpc: module build breaklinas
The RPAPHP hoplug driver will not build as a module, because it calls on pci_claim_resource(), which is not exported. This exports the symbol. Problem reported by Olaf Hering <olh@suse.de> A grep indicates that building drivers/parisc/lba_pci.c would have trouble building as a module for the same reason. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] PCI: pci_ids: remove duplicates gathered during merge periodGrant Coady
pci_ids.h: remove duplicates. Compile tested allmodconfig. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] PCI: restore 2 missing pci idsMark Rustad
Somewhere between 2.6.14 and 2.6.15-rc3, some PCI ids were apparently removed. The ecc.c module, which is not a part of the kernel.org tree, but included in some distributions, fails to compile. Signed-off-by: Mark Rustad <mrustad@mac.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] PCI Hotplug: fix up Kconfig help textPavel Machek
Remove reference to pcihpfs that no longer exists. Signed-off-by: Pavel Machek <pavel@suse.cz>
2006-01-31[PATCH] PCI Hotplug: fix up coding style issuesPavel Machek
Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] PCI: make it easier to see that set_msi_affinity() is usedGrant Grundler
I missed this usage in drivers/pci/msi.h: #ifdef CONFIG_SMP #define set_msi_irq_affinity set_msi_affinity #else #define set_msi_irq_affinity NULL #endif set_msi_affinity() is declared and exclusively used in msi.c. Here's a better way so (hopefully) history doesn't repeat itself. Signed-off-by: Grant Grundler <iod00d@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] PCI: drivers/pci/pci.c: #if 0 pci_find_ext_capability()Adrian Bunk
This patch #if 0's the unused global function pci_find_ext_capability(). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] PCI: irq and pci_ids: patch for Intel ICH8Jason Gaston
This patch adds the Intel ICH8 DID's to the irq.c and pci_ids.h files. Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] pci: Schedule removal of pci_module_initRichard Knutsson
Scheduled the removal of pci_module_init. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] PCI: schedule PCI_LEGACY_PROC for removalAdrian Bunk
PCI_LEGACY_PROC is deprecated since 2.5.53 in favor of lspci(8). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-31[PATCH] "Fix uidhash_lock <-> RXU deadlock" fixAndrew Morton
I get storms of warnings from local_bh_enable(). Better-tested patches, please. Cc: Ingo Molnar <mingo@elte.hu> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/x86Linus Torvalds
2006-01-31Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds
2006-01-31Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
2006-01-31Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds
2006-01-31Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
2006-01-31Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
2006-01-31Fix ipv4/igmp.c compile with gcc-4 and IP_MULTICASTLinus Torvalds
Modern versions of gcc do not like case statements at the end of a block statement: you need at least an empty statement. Using just a "break;" is preferred for visual style. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31[SCSI] ServeRAID: prevent seeing DADSI devicesJack Hammer
A critical thing the ServeRAID driver MUST do is hide the physical DASDI devices from the OS. It does this by intercepting the INQUIRY commands. In recent 2.6.15 testing, I discovered this to be failing. The cause was the driver assuming that the INQUIRY response data was in a simple single buffer, when it was actually a 1 element scatter gather list. This patch makes ips always look at the correct data when examining an INQUIRY response. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: add message sanity checkMoore, Eric
This adds a sanity check in the interrupt routine insures incoming message frames are a valid message frames. The code for setting 0xdeadbeaf in the freed message frames, apparently was already submitted by Christoph in previous patch submission. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: unloading the driver - only set asyn narrow for configured ↵Moore, Eric
devices This patch inhibits sending spi negotiation parameters for non-configured devices from the slave_destroy function. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: unloading the driver results in panic - fixMoore, Eric
The ioc->alt_ioc->alt_ioc pointer is not getting cleared during driver unload time. This dangling pointer can result in panic in certain circumstances, such as error recovery, or firmware download in flashless environments. This only impacts dual functions controllers, such as 1030. Please apply. This patch also includes a small cosmetic name change for mpt_spi_log_info. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] mptsas: don't complain on bogus slave_alloc callsChristoph Hellwig
When people use the userspace scanning facilities on SAS hardware the LLDD gets bogus slave_alloc calls. Just fail those gracefully instead of printing a warning in mptsas and another one in the midlayer. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: add task managment response code infoMoore, Eric
Adding verbose message returned from firmware when a task mangment request fails. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: add MSI supportChristoph Hellwig
On Mon, Jan 16, 2006 at 06:53:24PM -0700, Moore, Eric wrote: > Adding MSI support, and command line for enabling > it. By default, the command line option has MSI disabled. mpt_msi_enable is initialized to 0 implicitly, no need to do that. Also replace if (mpt_msi_enable == 1) tests with just if (mpt_msi_enable). Updated patch below: Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: overrun tape fixMoore, Eric
Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: add verbose messages for RAID actionsMoore, Eric
A customer request to send raid asyn actions from firmware to the event syslog. This shows when raid volumes go degraded, or complete resync, or volumes created/deleted, etc. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: increase reply frame size from 0x40 to 0x50 bytesMoore, Eric
Increasing the reply frame size by 16 bytes, to be in sync with the other fusion drivers. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: setting timeouts in eh threads appropiatley for fc/sas/spiChristoph Hellwig
On Mon, Jan 16, 2006 at 06:53:13PM -0700, Moore, Eric wrote: > The task managment request timeout in the eh threads was set > for U320 timing, which is between 2-5 seconds. > This is too small for FC and SAS. > According to the firmware engineers, Fibre needs to be 40 seconds > and SAS needs to be 10 seconds. The timeout selection should probably be done in a little helper instead of duplicated in a few places. Updated patch below. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: mptsas, increase discovery timout to 300 secondsMoore, Eric
Increase the port enable timeout only for SAS from 30 to 300 seconds. A customer request for the handling large topologies. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: spi bus reset when driver loadsMoore, Eric
This patch is for spi. This issues bus reset when driver loads. Handling cases when initator has negotiated for packetized, and target negotiated for non-packetized; effectly this bus reset is getting both target and initiator on the same sheet of music. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] aic79xx: Fix timer handlingHannes Reinecke
Fix the timer handling in aic79xx to use the SCSI-ML provided handling instead of implementing our own. It also fixes a deadlock in the command recovery code. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] aic7xxx: update documentationHannes Reinecke
This patch updates the documentation for aic7xxx and aic79xx with fixes from the adaptec driver. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] aic79xx: SLOWCRC fixHannes Reinecke
This patch introduces the SLOWCRC handling for certain buggy chipsets. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] aic79xx: sequencer fixesHannes Reinecke
This patch updates the aic79xx sequencer with latest fixes from adaptec. The sequencer code now corresponds with adaptec version 2.0.15. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] aic7xxx: Update aicasmHannes Reinecke
This patchset updates aicasm code with the latest fixes from adaptec. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: fix compileJames Bottomley
The prior fusion patches moved an invocation of a function, mptscsih_TMHandler(), static to mptscsih.c into mptsas.c Make the function unstatic, move the header to mptscsih.h and export it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: bump versionMoore, Eric
Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: FC rport code fixesMichael Reed
This fix's problems with recent fc submission regarding i/o being redirected to the wrong target. Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: move sas persistent event handling over to the mptsas moduleMoore, Eric
This moves code intented for SAS from the generic mptscsih module over to the mptsas module. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: target reset when drive is being removedMoore, Eric
The issuing of the target reset used in device hot removal case so the firmware queue is flushed out off outstanding commands. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] fusion: add support for raid hot add/del supportMoore, Eric
RAID event support. This will hot add and remove raid volumes when managment application creates and deletes the volumes. The driver is basically responding to firmware asyn events, and reporting the changes to the above layers. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31[SCSI] scsi_transport_sas.c: display port identifierMoore, Eric
This patch displays the port identifier on the folder attribute; located in the middle digit. /sys/class/sas_rphy/rphy-%x:%x:%x The port identifier is basically the unique identifier for each sas domain. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-31Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds
2006-01-31Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
2006-01-31[PATCH] rcu_torture_lock deadlock fixIngo Molnar
rcu_torture_lock is used in a softirq-unsafe manner, but it is also taken by rcu_torture_cb(), which may execute in softirq-context, resulting in potential deadlocks. The fix is to acquire rcu_torture_lock in a softirq-safe manner. With this fix applied, the rcu-torture code passes validation. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31[PATCH] fix deadlock in drivers/pci/msi.cIngo Molnar
The lock validator caught another one: drivers/pci/msi.c is accessing &irq_desc[i].lock with interrupts enabled (!). The fix is to disable interrupts properly. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31[PATCH] fix uidhash_lock <-> RCU deadlockIngo Molnar
RCU task-struct freeing can call free_uid(), which is taking uidhash_lock - while other users of uidhash_lock are softirq-unsafe. The fix is to always take the uidhash_spinlock in a softirq-safe manner. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-31Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
2006-01-31Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-27 22:51:11 +0000