aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-06-11[PATCH] libertas: fix 'keep previous scan' behaviorDan Williams
Do not clear the scan list except under specific conditions, such as when (a) user-requested, or (b) joining/starting an adhoc network. Furthermore, only clear entries which match the SSID or BSSID of the request, not the whole scan list. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make scan result handling more flexibleDan Williams
- use a linked list for scan results - age scan results - pass bss_descriptors around instead of indexes into the scan table - lock access to the scan results - stop returning EAGAIN from SIOCGIWSCAN handler Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: updated mesh commands for 5.220.9.p11Luis Carlos Cobo
Updated commands fwt_add and fwt_list, bt_list. New commands: bt_get_invert, bt_set_invert, to invert the blinding table, i.e., receive only frames from nodes listed in the BT. This patch needs/is needed for firmware 5.220.9.p11. Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: version bump (321p0) and cmds update for new fw (5.220.10.p0)Luis Carlos Cobo Rus
This patch along with the previous commands update one, is necessary for mesh and fwt ioctls to work properly with firmware version 5.220.10.p0 and later. Signed-off-by: Luis Carlos Cobo Rus <luiscarlos@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: don't tear down netdev in libertas_activate_cardDan Williams
libertas_activate_card() doesn't create the netdev, and shouldn't free it on error. The caller of libertas_activate_card() is responsible for cleaning up errors from libertas_add_card(), not libertas_activate_card(). Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: correctly unregister mesh netdev on errorDan Williams
Subject says it all. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: replace 'macaddress' with 'bssid'Dan Williams
Start to normalize bss_descriptor with ieee80211_network so we can eventually replace bss_descriptor more easily. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: call SET_NETDEV_DEV from common codeDan Williams
Move usage of SET_NETDEV_DEV into common code since it has nothing to do with bus-specific devices. Also fixes a bug where the mesh device was getting SET_NETDEV_DEV called after register_netdevice, resulting in no 'device' link in /sys/class/net/mshX/. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fixed kernel oops on module/card removalLuis Carlos Cobo
Fixed kernel oops on module/card removal (using dongles) Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: add URB debug infoLuis Carlos Cobo
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fixed incorrect assigment of fcs errors to frag errorsLuis Carlos Cobo
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove unused variables in wlan_dev_tHolger Schurig
Actually, this patch removev wlan_dev_t totally and puts the used variables of it directly into wlan_private. That reduces one level of indirection and looks a little bit simpler. It's now "priv->card" and not "priv->wlan_dev.card" and "priv->dev" instead of "priv->wlan_dev.netdev" Changed two occurences of "((wlan_private *) dev->priv)->wlan_dev.netdev" into "dev", because I didn't see the point in doing pointer-ping-pong. The variables "ioport", "upld_rcv" and "upld_type" where unused. They have been removed. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: let DRV_NAME be overridableHolger Schurig
For now, it's "libertas" by default, but that is overwritten in if_usb.c/if_bootcmd.c and in if_cs.c. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix RESET logic at unload timeHolger Schurig
Previously, we had a fixed array of 5 elements where we remembered all initialized devices. This has been changed to use a "struct list_head" organization, which is IMHO cleaner. Also renamed usb_cardp to cardp, as in the reset of the code. Renamed reset_device() to if_usb_reset_device() like many other functions. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: split module into two (libertas.ko and usb8xxx.ko)Holger Schurig
* add CONFIG_LIBERTAS to Kconfig * remove global variable libertas_fw_name, the USB module might want to use a different default FW name than the CF module, so libertas_fw_name is now local to if_usb.c * exported some symbols as GPL Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: move contents of fw.h to decl.hHolger Schurig
Also removes some useless "extern" declarations from function declaration. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: indirect all hardware access via hw_XXXX functionsHolger Schurig
This functions makes all libertas_sbi_XXX functions static to the if_usb.c file and renames them to if_usb_XXXX(). The get called from other places of the source code via priv->hw_XXXX(). Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: wakeup both mesh and normal wakeup when getting out of scanChris Ball
The previous patch wakes up the mesh device *instead* of the wlan device when coming out of scan. We need to wake up both of them. Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: added transmission failures to mesh statisticsJavier Cardona
Added transmission failures to mesh statistics. Removed whitespace before newlines. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix error handling of card initializationMarcelo Tosatti
Subject says it all. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fixed transmission flow control on the mesh interfaceJavier Cardona
This patch implements proper transmission flow control on mshX. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: split wlan_add_card()Holger Schurig
Split wlan_add_card() into a part that just setups kernel parameters and into the function libertas_activate_card(), which will implizitly use hardware functions by the started thread. This allows us later to do something like this: priv = libertas_add_card(); priv->hw_command_to_host = if_usb_command_to_host; priv->hw_xxxx = if_usb_xxxx; priv->hw_yyyy = if_usb_yyyy; wlan_activate_card() and of course the CF driver can set it's own functions. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: move reset_device() code main.c to if_usb.cHolger Schurig
The reset_device() logic is only needed for USB devices, not for CF devices. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: changed some occurences of kmalloc() + memset(&a,0,sz) to ↵Holger Schurig
kzalloc() The subject says it all. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix SSID outputHolger Schurig
* a newline was missing * changed %32s to '%s', no need to right justify the ESSID Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: get rid of libertas_sbi_get_priv()Holger Schurig
It's not really needed, because we can call wlan_remove_card() with wlan_private* anyway. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: change debug output of libertas_interrupt()Holger Schurig
It used to be LBS_DEB_MAIN, now it's LBS_DEB_THREAD Also fixed a missing ":" in lbs_deb_enter() Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: single out mesh codeHolger Schurig
This patches adds the two functions wlan_add_mesh() and wlan_remove_mesh(), which are responsible for the mshX interface. In a CF driver with a non- mesh-aware firmware you can omit the calls to this functions. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: tune debug codeHolger Schurig
* renamed module parameter back to libertas_debug * change from bit shifts to constants, that way it's easier to look at the source and specify the libertas_debug=0xXXXX module parameter * moved module_param from fw.c to main.c, where it belongs better Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make debug configurableHolger Schurig
The debug output of libertas was either not present or it was overwhelming. This patch adds the possibility to specify a bitmask for the area of interest. One should then only get the desired output. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: exclude non-used code when PROC_DEBUG is not setHolger Schurig
This reduces usb8xxx.ko by 951 bytes (text) and 256 bytes (data) when PROC_DEBUG isn't defined. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix scanning from associate pathMarcelo Tosatti
The previous scan fix did not account for scan paths other than set_scan() that need to do a full scan at once. Add a "full_scan" parameter to wlan_scan_networks() to control such behaviour. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: make libertas_wlan_data_rates staticHolger Schurig
Move libertas_wlan_data_rates into wext.c and make it static. wext.c is the only user of this array. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: move vendor & product id's into if_usb.cHolger Schurig
For me it looks cleaner, because it removes one level of indirection. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove unused/superfluous definitions of DEV_NAME_LENHolger Schurig
DEV_NAME_LEN is already defined in defs.h and that is sufficient. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove __FILE__ from debug outputHolger Schurig
Remove filename from debug output because it's way too long. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: remove deprecated pm_register and associated codeMarcelo Tosatti
Subject says it all. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: fix removal of all debugfs filesHolger Schurig
rmmod did not remove /sys/kernel/debug/libertas_wireless/eth1/ subscribed_events/high_snr. After I fixed this, I noticed that it also didn't remove /sys/kernel/debug/libertas_wireless/eth1 as well. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: a debug output was missing a newlineHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: rename wlan_association_workerHolger Schurig
Renames wlan_association_worker into libertas_association_worker Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-11[PATCH] libertas: scan two channels per scan commandMarcelo Tosatti
Scan two channels per each command on set_scan(), then bail out and let get_scan() continue the scanning work up to the last channel. This gives time to the firmware so it can go back to the association channel and keep the connection alive. Fixes http://dev.laptop.org/ticket/841 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-06-04Linux 2.6.22-rc4Linus Torvalds
2007-06-04Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [JFFS2] Fix obsoletion of metadata nodes in jffs2_add_tn_to_tree() [MTD] Fix error checking after get_mtd_device() in get_sb_mtd functions [JFFS2] Fix buffer length calculations in jffs2_get_inode_nodes() [JFFS2] Fix potential memory leak of dead xattrs on unmount. [JFFS2] Fix BUG() caused by failing to discard xattrs on deleted files. [MTD] generalise the handling of MTD-specific superblocks [MTD] [MAPS] don't force uclinux mtd map to be root dev
2007-06-04libata: always use polling SETXFERTejun Heo
Several people have reported LITE-ON LTR-48246S detection failed because SETXFER fails. It seems the device raises IRQ too early after SETXFER. This is controller independent. The same problem has been reported for different controllers. So, now we have pata_via where the controller raises IRQ before it's ready after SETXFER and a device which does similar thing. This patch makes libata always execute SETXFER via polling. As this only happens during EH, performance impact is nil. Setting ATA_TFLAG_POLLING is also moved from issue hot path to ata_dev_set_xfermode() - the only place where SETXFER can be issued. Note that ATA_TFLAG_POLLING applies only to drivers which implement SFF TF interface and use libata HSM. More advanced controllers ignore the flag. This doesn't matter for this fix as SFF TF controllers are the problematic ones. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-04Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] JAZZ ESP and SUN ESP need SPI_ATTRS [SCSI] atari_NCR5380: update_timeout removal [SCSI] aacraid: fix shutdown handler to also disable interrupts. [SCSI] qla2xxx: fix timeout in qla2x00_down_timeout [SCSI] fix CONFIG_SCSI_WAIT_SCAN=m
2007-06-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: reduce raciness when input handlers disconnect Input: ucb1x00 - do not access input_dev->private directly Input: logips2pp - fix typo in Kconfig Input: db9 - do not ignore dev2 module parameter
2007-06-04Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [ICMP]: Fix icmp_errors_use_inbound_ifaddr sysctl [IPV4]: Fix "ipOutNoRoutes" counter error for TCP and UDP [NET] gso: Fix GSO feature mask in sk_setup_caps [TCP]: Fix GSO ignorance of pkts_acked arg (cong.cntrl modules) [NET]: Fix comparisons of unsigned < 0. [NET]: Make net watchdog timers 1 sec jiffy aligned. [ATM]: Fix warning. [TCP]: Use default 32768-61000 outgoing port range in all cases. [AF_UNIX]: Fix datagram connect race causing an OOPS. [TG3]: Fix link problem on Dell's onboard 5906. [AF_UNIX]: Make socket locking much less confusing.
2007-06-04Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [ATA]: Don't allow to enable this for SPARC64 without PCI. [VIDEO]: XVR500 and XVR2500 require FB=y
2007-06-04vanishing ioctl handler debuggingAndrew Morton
We've had several reoprts of the CPU jumping to 0x00000000 is do_ioctl(). I assume that there's a race and someone is zeroing out the ioctl handler while this CPU waits for the lock_kernel(). The patch adds code to detect this, then emits stuff which will hopefuly lead us to the culprit. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-04mtrr atomicity fixAndrew Morton
Rafael gets this on an SMP box with kernel preemption enabled, during hibernation and restore (100% of the time): Enabling non-boot CPUs ... BUG: using smp_processor_id() in preemptible [00000001] code: bash/4514 caller is mtrr_save_state+0x9/0x40 Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 13:38:55 +0000