aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-02-17NetXen: Fix to get the driver working after sparse changesAmit S. Kale
Signed-off-by: Amit S. Kale <amitkale@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17net/wan/pc300too.c: pci_module_init to pci_register_driverRichard Knutsson
Convert pci_module_init() to pci_register_driver(). Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: bump version numberJay Cliburn
Bump the version number. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: add L1 device id to pci_ids, then use itChris Snook
Add device id for the Attansic L1 chip to pci_ids.h, then use it. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: remove unused defineChris Snook
Remove unused define from atl1_main.c. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: read MAC address from registerJay Cliburn
On some Asus motherboards containing the L1 NIC, the MAC address is written by the BIOS directly to the MAC register during POST, and is not stored in eeprom. If we don't succeed in fetching the MAC address from eeprom or spi, try reading it directly from the MAC register. Suggested by Xiong Huang. And do some cleanup while we've got the hood up... Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: fix bad ioread addressAl Viro
An ioread32 statement reads the wrong address. Fix it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17atl1: drop NET_PCI from KconfigJay Cliburn
The atl1 driver doesn't need NET_PCI. Remove it from Kconfig. Noticed by Chad Sprouse. Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17PCMCIA-NETDEV : the 2nd argument of el3_interrrupt and smc_interrupt is ↵Komuro
struct net_device* Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17phylib: Add support for Marvell 88e1111S and 88e1145Andy Fleming
Changes include: * New support for 88e1145 * New support for 88e111s * Fixing 88e1101 driver to not match non-88e1101 PHYs * Increases in feature support across Marvell PHY product line * Fixes a bunch of whitespace issues found by Lindent Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-17Merge branch 'master' into upstreamJeff Garzik
2007-02-17Merge branch 'gfar' of ↵Jeff Garzik
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into upstream
2007-02-17Merge AT91, EP93xx, General devel, PXA, S3C, V6+ and Xscale treesRussell King
2007-02-17[ARM] 4211/1: Provide a defconfig for ns9xxxUwe Kleine-König
This is a follow up for the patch providing the base support for the ns9xxx machine type. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4210/1: base for new machine type "NetSilicon NS9360"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4222/1: S3C2443: Remove reference to missing S3C2443_PMBen Dooks
S3C2443_PM is not defined in our Kconfig, so remove the reference from CPU_S3C2443 to stop the configuration process warning about it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17Merge branch 'master' into 85xxKumar Gala
2007-02-17[POWERPC] 83xx: Renamed MPC8323 MDS dts and defconfig to match other boardsKumar Gala
Renamed the MPC8323 MDS and defconfig to match the naming convention followed by other MDS boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-17[POWERPC] 83xx: Updated and renamed MPC8360PB to MPC836x MDSKumar Gala
The MPC836x PB board is really just one part of the MPC836x MDS. We currently name all other PB boards as MDS. Removed all references to PB and replaced with MDS. Additionally renamed the .dts to match the defconfig (mpc836x_mds*). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-17[POWERPC] 83xx: Use of_platform_bus_probe to setup QE devicesKumar Gala
Use of_platform_bus_probe to setup devices on the of_platform_bus since its much cleaner. We explicitly specify the bus ids since the we want to get rid of the default mechanism in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-17[POWERPC] 83xx: use default value of loops_per_jiffyKumar Gala
Use the default value setup by initialization of loops_per_jiffy, its close enough for 83xx and will get fixed up by calibrate_delay(). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-17[POWERPC] 83xx: Remove obsolete setting of ROOT_DEV.Kumar Gala
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-17[POWERPC] 83xx: Cleaning up machine probing and board initcallsKumar Gala
Cleaned up the probing functionality to be more consistent across all 83xx boards and added machine_is() protection around board initcalls to ensure they only do something if we are actually running on that board. Additionally, removed some dead code on mpc832x_mds. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-17[ARM] 4221/1: S3C2443: DMA supportBen Dooks
Add initialisation and mappings for S3C2443 DMA system Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4220/1: S3C24XX: DMA system initialised from sysdevBen Dooks
This patch gets the DMA system for the S3C24XX ready for the S3C2443, which requires 6 dma channels at a different stride, and different base IRQ. The DMA system is now initialised from the same drivers which apply the DMA mappings, as well as removing the DMA sysdev intialisation out of the main init code (which is now being called from a sysdev probe, so cannot add a new sysdev) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4219/1: S3C2443: DMA source definitionsBen Dooks
Defines for the S3C2443 DMA source selection, and update the maximum channels to 6 if the S3C2443 is selected. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4218/1: S3C2412: fix CONFIG_CPU_S3C2412_ONLY wrt to S3C2443Ben Dooks
Update the Kconfig of arch/arm/mach-s3c2443 to add the CONFIG_CPU_S3C2443 to the list of config variabls which mean CONFIG_CPU_S3C2412_ONLY cannot be set Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4217/1: S3C24XX: remove the dma channel show at startupBen Dooks
Remove the DMA code's channel printing at startup as this is firstly a waste of console output on initialsaion, and secondly is going to be obsolete once the S3C2443 DMA code has been merged Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17Merge branch 'master' into 83xxKumar Gala
2007-02-17ieee1394: fix another deadlock in nodemgrStefan Richter
A "modprobe ohci1394; sleep 1.5; modprobe -r ohci1394" could get stuck in uninterruptible state, especially if an external node was connected. http://bugzilla.kernel.org/show_bug.cgi?id=7792 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-02-17ieee1394: cycle timer read extension for raw1394Pieter Palmers
This implements the simultaneous read of the isochronous cycle timer and the system clock (in usecs). This allows to express the exact receive time of an ISO packet as a system time with microsecond accuracy. http://bugzilla.kernel.org/show_bug.cgi?id=7773 The counterpart patch for libraw1394 can be found at http://thread.gmane.org/gmane.linux.kernel.firewire.devel/8934 Patch update (Stefan R.): Disable preemption and local interrupts. Prevent integer overflow. Add paranoid error checks and kerneldoc to hpsb_read_cycle_timer. Move it to other ieee1394_core high-level API functions. Change comments. Adjust whitespace. Rename struct _raw1394_cycle_timer. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Pieter Palmers <pieterp@joow.be> Acked-by: Dan Dennedy <dan@dennedy.org>
2007-02-17[ARM] 4090/2: avoid clash between PXA and SA1111 definesNicolas Pitre
The Lubbock platform uses both a PXA25x and a SA1111 at the same time. Both chips have the same "Serial Audio Controller" registers although the SA1111 one is never expected to be used in preference to the PXA25x one. So let's disable the SA1111 defines whenever compilation is for a PXA architecture and make the PXA defines always defined. This removes a bunch of "already defined" warnings as well since the current hack to prevent them depended on include ordering which wasn't always right. While at it, clean up the SA1111 defines allowing to get rid of the __CCREG() macro. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4216/1: add .gitignore entries for ARM specific filesNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4214/2: S3C2410: Add Armzone QT2410Ben Dooks
Patch from: Harald Welte <laforge@openmoko.org> Add support for the Armzone QT2410 system, with basic peripheral support for TFT display, SPI and LEDs. Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Ben Dooks <ben-linux@fluf.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4215/1: s3c2410 usb device: per-platform vbus_drawArnaud Patard
Introduce a platform_device (machine) specific callback function which gets called when the amount of power we can draw from Vbus has changed. Signed-off-by: Harald Welte <laforge@openmoko.org> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4213/1: S3C2410 - Update definition of ADCTSC_XY_PSTArnaud Patard
Update S3C2410_ADCTSC_XY_PST macro to allow setting the ADCTSC_XY_PST bits. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[POWERPC] Dispose irq mapping when done in mpc52xx_serial.cSylvain Munaut
Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-16Pull bugzilla-7897 into release branchLen Brown
2007-02-16Pull bugzilla-7887 into release branchLen Brown
2007-02-16Pull bugzilla-7570 into release branchLen Brown
2007-02-16Pull bugzilla-7200 into release branchLen Brown
2007-02-16Pull bugzilla-7122 into release branchLen Brown
2007-02-16Pull bugzilla-5534 into release branchLen Brown
2007-02-16Pull remove-hotkey into release branchLen Brown
2007-02-16Pull sony into release branchLen Brown
2007-02-16Pull fluff into release branchLen Brown
Conflicts: arch/x86_64/pci/mmconfig.c drivers/acpi/bay.c Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-16ACPI: IA64: react to acpi_table_parse() return value changeJohn Keller
acpi_boot_init() is making a bad check on the return status from acpi_table_parse(). acpi_table_parse() now returns zero on success, one on failure. Signed-off-by: Aaron Young <ayoung@sgi.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-16ACPI: hotkey: remove driver, per feature-removal-schedule.txtLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-17ide: make ide_hwif_t.ide_dma_host_on void (v2)Bartlomiej Zolnierkiewicz
* since ide_hwif_t.ide_dma_host_on is called either when drive->using_dma == 1 or when return value is discarded make it void, also drop "ide_" prefix * make __ide_dma_host_on() void and drop "__" prefix v2: * while at it rename atiixp_ide_dma_host_on() to atiixp_dma_host_on() and sgiioc4_ide_dma_host_on() to sgiioc4_dma_host_on(). [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-17ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2)Bartlomiej Zolnierkiewicz
* since ide_hwif_t.ide_dma_{host_off,off_quietly} always return '0' make these functions void and while at it drop "ide_" prefix * fix comment for __ide_dma_off_quietly() * make __ide_dma_{host_off,off_quietly,off}() void and drop "__" prefix v2: * while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(), sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}() and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly() [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 07:36:06 +0000