aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-05-31kbuild: fix $(src) assignmnet with external modulesSam Ravnborg
When we introduced support for KBUILD_EXTRA_SYMBOLS we started to include the externam module's kbuild file when doing the final modpost step. As external modules often do: ccflags-y := -I$(src) We had problems because $(src) was unassinged and gcc then used the next parameter for -I resulting in strange build failures. Fix is to assign $(src) and $(obj) when building external modules. This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=10798 Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Tvrtko <tvrtko.ursulin@sophos.com> Cc: Andrea Arcangeli <andrea@qumranet.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
2008-05-318250 Serial Driver: revert extra IRQ flag definition patchBryan Wu
As Russell pointed out, original patch will break some serial configurations because of the dependency of the <asm/serial.h> header file. Revert it first and try to find out other solution later Cc: Javier Herrero <jherrero@hvsistemas.es> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-31Blackfin arch: update anomaly headers from toolchain trunkMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-31Blackfin arch: Remove bad and usless codeMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-31Blackfin arch: Fix bug - set corret SSEL and IRQ to enable AD7877 on BF527Bryan Wu
AD7877 use SSEL_2 (P9.9) and IRQ_PF8 (P9.14) on BF527 - populating JP3 to enable STAMP - disable SW11.2 to disconnect SSEL_2/PF12 from Rotary NAND - disable SW18.1 to disconnect SSEL_2 from MAX1233 touchscreen chip Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-05-31[POWERPC] Fix DMA nodes in the MPC8610 HPCD device treeTimur Tabi
The node for DMA2 in the MPC8610 HPCD device tree has the wrong compatible properties. This breaks the DMA driver and the sound driver. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-31[POWERPC] Export empty_zero_page and copy_page in arch/ppcTony Breeds
Currently ext4 and fuse fail to link if modular: ERROR: "copy_page" [fs/fuse/fuse.ko] undefined! ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined! make[3]: *** [__modpost] Error 1 make[2]: *** [modules] Error 2 make[1]: *** [sub-make] Error 2 While arch ppc exists it may as well compile, so this exports those symbols (which are already exported in arch/powerpc). Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-31[POWERPC] Add "memory" clobber to MMIO accessorsBenjamin Herrenschmidt
Gcc might re-order MMIO accessors vs. surrounding consistent memory accesses, which is a "bad thing", and could break drivers. This fixes it by adding a "memory" clobber to the MMIO accessors, which should prevent gcc from doing that reordering. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-30Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c [libata] sata_fsl: Fix broken driver, add port multiplier (PMP) support libata: SRST can't be trusted on PMP sil3726 libata: fix libata-scsi kernel-doc notation ata: Convert to static DEFINE_SPINLOCK(lock) ata_piix: fix macbook ich8m problems sata_mv: implement SoC guideline SATA_S11 sata_mv: workaround for 60x1 errata sata13 sata_mv: nuke unreleased GenIIe revisions sata_mv: PHY_MODEx errata fixes sata_mv: move SOC_FLAG to hpriv
2008-05-30[PATCH 3/3] ocfs2/net: Silence build warningsSunil Mushran
This patch silences the build warnings concerning o2net_init_nst() and friends when building without CONFIG_DEBUG_FS enabled. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-05-30[PATCH 2/3] ocfs2/dlm: Silence build warningsSunil Mushran
This patch silences the build warnings concerning dlm_debug_init() and friends when building without CONFIG_DEBUG_FS enabled. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-05-30[PATCH 1/3] ocfs2/net: Silence build warningsSunil Mushran
This patch silences the build warnings concerning o2net_debugfs_init() and friends when building without CONFIG_DEBUG_FS enabled. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-05-30ocfs2: Rename 'user_stack' plugin structure to 'ocfs2_user_plugin'Joel Becker
The static structure describing the userspace cluster plugin for ocfs2 was named 'user_stack', which is a real pain when people are grep(1)ing the tree for the program stack object 'user_stack'. Change the name to something distinct and namespaced. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-05-30Mark 'scripts/decodecode' executableLinus Torvalds
.. because it is. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-30[SCSI] qla2xxx: Update version number to 8.02.01-k4.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-30[SCSI] qla2xxx: Correct handling of AENs postings for vports.Seokmann Ju
Initialize all proper structure members in order to support work-list vport processing. This code also properly acquires the correct (physical hardware_lock) lock during work submission. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-30[SCSI] qla2xxx: Revert "qla2xxx: Use proper HA during asynchronous event ↵Seokmann Ju
handling." This reverts commit bd2a1846b2313e32d0270151a31a6b8335384a20. The original (prior to the reverted commit) code was correct. Additionally, the vp_idx should be checked during MBA_PORT_UPDATE in order for proper handling to take place for a given vport. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: notify on empty virtio: force callback on empty. virtio_blk: fix endianess annotations virtio_config: fix len calculation of config elements virtio_net: another race with virtio_net and enable_cb virtio: An entropy device, as suggested by hpa. virtio_blk: allow read-only disks lguest: fix ugly <NULL> in /proc/interrupts virtio: set device index in common code. virtio: virtio_pci should not set bus_id. virtio: bus_id for devices should contain 'virtio' Fix crash in virtio_blk during modprobe ; rmmod ; modprobe lguest: use ioremap_cache, not ioremap
2008-05-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix rpadlpar pci hotplug driver sysfs usage
2008-05-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: rename SW_RADIO to SW_RFKILL_ALL Input: gtco - fix double kfree in error handling path Input: pxa27x_keypad - miscellaneous fixes Input: atkbd - mark keyboard as disabled when suspending/unloading Input: apanel - remove duplicate include Input: wm9713 - support five wire panels Input: wm97xx-core - fix race on PHY init Input: wm97xx-core - fix driver name Input: wm97xx-core - report a phys for WM97xx touchscreens Input: i8042 - make sure Dritek quirk is invoked at resume Input: i8042 - add Dritek quirk for Acer TravelMate 660
2008-05-30drivers/watchdog/geodewdt.c: build fixIngo Molnar
* Wim Van Sebroeck <wim@iguana.be> wrote: > Author: Jordan Crouse <jordan.crouse@amd.com> > Date: Mon Jan 21 10:07:00 2008 -0700 > > [WATCHDOG] Add a watchdog driver based on the CS5535/CS5536 MFGPT timers -tip testing found the following build failure on latest -git: drivers/watchdog/geodewdt.c: In function 'geodewdt_probe': drivers/watchdog/geodewdt.c:225: error: too many arguments to function 'geode_mfgpt_alloc_timer' make[1]: *** [drivers/watchdog/geodewdt.o] Error 1 make: *** [drivers/watchdog/geodewdt.o] Error 2 with this config: http://redhat.com/~mingo/misc/config-Fri_May_30_15_19_52_CEST_2008.bad find the fix below. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-30PCI: fix rpadlpar pci hotplug driver sysfs usageBenjamin Herrenschmidt
When Greg "fixed" the sysfs usage of that driver a while back, he seem to have introduced a bug where the quotes are added around the name of our specific sysfs files, thus breaking the user space tool. This fixes it. Tested DLPAR operations on a POWER6 machine successfully. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-30ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.cpeerchen
Change the partial Device IDs of nvidia MCP7B AHCI controller in ahci.c, as the actual PCI IDs deployed in the field differed from the forecasted ones preemptively placed in the driver. Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30[libata] sata_fsl: Fix broken driver, add port multiplier (PMP) supportAshish Kalra
The following commit (4c9bf4e799ce06a7378f1196587084802a414c03): libata: replace tf_read with qc_fill_rtf for non-SFF drivers Broke the sata_fsl.c driver in 2.6.26-rc. I know the following patch fixes the issue, it clearly also adds port multipler support. The current 2.6.26-rc driver is broken. On boot with debug enabled we get something like (w/o this patch): spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 .. continues for ever. This change fixes this as a side effect of adding port multiplier support. Signed-off-by: Ashish Kalra <ashish.kalra@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30libata: SRST can't be trusted on PMP sil3726Tejun Heo
As in sil4726, SRST can't be trusted on sil3726 causing detection problems under certain configuraitons. I thought it was from the Config Disk device but apparently not. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30libata: fix libata-scsi kernel-doc notationRandy Dunlap
Fix libata-scsi kernel-doc notation: Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1659): No description found for parameter 'cmd' Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1971): No description found for parameter 'buf' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30ata: Convert to static DEFINE_SPINLOCK(lock)Pradeep Singh Rautela
Replace deprecated static spinlock_t instance to static DEFINE_SPINLOCK(lock). Signed-off-by: Pradeep Singh <rautelap@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30ata_piix: fix macbook ich8m problemsTejun Heo
ICH8M on macbooks are peculiar in that some of them lock up when the second port is enabled, some return bogus values on SIDPR access while yet others hang on SIDPR access. Also, the ich8m_apple_sata entry was wrongly added below generic ich8m entry making it virtually useless. This patch works around macbook ich8m problems by * moving ich8m_apple_sata entry above generic ich8m entry * dropping PIIX_FLAG_SIDPR from ich8m_apple_sata * adding subsystem 106b:00a1 as ich8m_apple_sata Reported and tested by MATSUBAYASHI. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: MATSUBAYASHI 'Shaolin' Kohji <shaolin@rhythmaning.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30sata_mv: implement SoC guideline SATA_S11Mark Lord
The 5182 System-On-Chip (SOC) variant wants certain lower bits to be cleared on any write to the PHY_MODE3 register. If/when support is added for other SOC variants, we'll need some way to uniquely identify the 5182, and not perform this workaround for the others. But for now, it is the only SOC variant we support here. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30sata_mv: workaround for 60x1 errata sata13Mark Lord
The "B2" variant of the 6041/6081 (genII) chips requires that the PHY_MODE3 register be rewritten after any write to PHY_MODE4. This fixes a regression introduced by an earlier patch. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30sata_mv: nuke unreleased GenIIe revisionsMark Lord
The only public release of the 6042/7042 chips was/is revision "B0". Remove code that attempted to deal with earlier, non-released revs. This matches the logic of the current Marvell "proprietary" driver. Also, bump up the sata_mv version number, to reflect this batch of erratas. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30sata_mv: PHY_MODEx errata fixesMark Lord
Fix and update the errata handling for the PHY_MODEx registers. This improves receiver noise tolerance, among other things. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30sata_mv: move SOC_FLAG to hprivMark Lord
Convert the System-on-Chip flag from a host flag to an hpriv flag, for better consistency with other chip-rev flags, and for easier use in errata fixes etc. Also change the related "HAS_PCI()" into "!IS_SOC()" for better consistency of naming/use (everything else SOC-related already uses "SOC"). There are no functionality changes in this patch. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-30[ALSA] hda - Fix model for LG LS75 laptopTakashi Iwai
Set the proper model for LG LS75 with CM9880 codec. See ALSA bug#2105: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2105 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits) llc: Fix double accounting of received packets netfilter: nf_conntrack_expect: fix error path unwind in nf_conntrack_expect_init() bluetooth: fix locking bug in the rfcomm socket cleanup handling mac80211: fix alignment issue with compare_ether_addr() mac80211: Fix for NULL pointer dereference in sta_info_get() mac80211: fix a typo in ieee80211_handle_filtered_frame comment rndis_wlan: add missing range check for power_output modparam iwlwifi: fix rate scale TLC column selection bug iwlwifi: fix exit from stay_in_table state rndis_wlan: Make connections to TKIP PSK networks work mac80211 : Fixes the status message for iwconfig rt2x00: Use atomic interface iteration in irq context rt2x00: Reset antenna RSSI after switch rt2x00: Don't count retries as failure rt2x00: Fix memleak in tx() path mac80211: reorder channel and freq reporting in wext scan report b43: Fix controller restart crash mac80211: fix ieee80211_rx_bss_put/get imbalance net/mac80211: always true conditionals b43: Upload both beacon templates on initial load ...
2008-05-30Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Update default configuration. [S390] disassembler: fix idte instruction format. [S390] tape: fix race with stack local wait_queue_head_t. [S390] 3270: fix race with stack local wait_queue_head_t. [S390] dasd: use a generic wait_queue for sleep_on [S390] sclp_vt220: fix scheduling while atomic bug. [S390] showmem: Only walk spanned pages. [S390] appldata: prevent cpu hotplug when walking cpu_online_map. [S390] Fix section mismatch warnings. [S390] s390 types: make dma_addr_t 64 bit capable [S390] tape: Fix race condition in tape block device driver [S390] fix sparsemem related compile error with allnoconfig on s390
2008-05-30acpi: fix sparse const errorsHarvey Harrison
In this case we want a constant pointer to constant chars: drivers/misc/thinkpad_acpi.c:3824:19: error: Just how const do you want this type to be? Like the error says. drivers/misc/thinkpad_acpi.c:3863:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3864:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3865:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3866:19: error: Just how const do you want this type to be? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-30Input: rename SW_RADIO to SW_RFKILL_ALLHenrique de Moraes Holschuh
The SW_RADIO code for EV_SW events has a name that is not descriptive enough of its intended function, and could induce someone to think KEY_RADIO is its EV_KEY counterpart, which is false. Rename it to SW_RFKILL_ALL, and document what this event is for. Keep the old name around, to avoid userspace ABI breaks. The SW_RFKILL_ALL event is meant to be used by rfkill master switches. It is not bound to a particular radio switch type, and usually applies to all types. It is semantically tied to master rfkill switches that enable or disable every radio in a system. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-30Input: gtco - fix double kfree in error handling pathDmitry Torokhov
The code would try to free 'report' twice upon input_register_device() failure. Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-30[ALSA] hda - Fix mic input on HP2133Takashi Iwai
The mic pins are wrongly assigned on AD1884A mobile model. The mic handling is fixed for the automatic mic selection, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-30[ALSA] ac97 - Fix ASUS A9T laptop outputTakashi Iwai
ASUS A9T laptop uses line-out pin as the real front-output while other devices use it as the surround. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-30llc: Fix double accounting of received packetsArnaldo Carvalho de Melo
llc_sap_rcv was being preceded by skb_set_owner_r, then calling llc_state_process that calls sock_queue_rcv_skb, that in turn calls skb_set_owner_r again making the space allowed to be used by the socket to be leaked, making the socket to get stuck. Fix it by setting skb->sk at llc_sap_rcv and leave the accounting to be done only at sock_queue_rcv_skb. Reported-by: Dmitry Petukhov <dmgenp@gmail.com> Tested-by: Dmitry Petukhov <dmgenp@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-30[S390] Update default configuration.Martin Schwidefsky
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-30[S390] disassembler: fix idte instruction format.Martin Schwidefsky
The correct instruction format of idte is "idte r1,r3,r2" with r1 at bit 24, r3 at bit 16 and r2 at bit 28. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-30[S390] tape: fix race with stack local wait_queue_head_t.Martin Schwidefsky
A wait_event call with a stack local wait_queue_head_t structure that is used to do the wake up for the wait_event is inherently racy. After the wait_event finished the wake_up call might not have completed yet. Replace the stack local wait_queue_head_t in tape_do_io and tape_do_io_interruptible with a per device wait queue. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-30[S390] 3270: fix race with stack local wait_queue_head_t.Martin Schwidefsky
A wait_event call with a stack local wait_queue_head_t structure that is used to do the wake up for the wait_event is inherently racy. After the wait_event finished the wake_up call might not have completed yet. Remove the stack local wait_queue_head_t from raw3270_start_init and use the global raw3270_wait_queue instead. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-30[S390] dasd: use a generic wait_queue for sleep_onStefan Haberland
Use a generic wait_queue to prevent the wait_queue in dasd_sleep_on_ functions from being referenced by callback_data while it does not exist any more. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-30[S390] sclp_vt220: fix scheduling while atomic bug.Heiko Carstens
The driver incorrectly assumed that putchar will only be called from schedulable process context and therefore blocked and waited if no free output buffers where available. Since putchar may also be called from BH context this may lead to deadlocks. To fix this just return the number of characters accepted and let the upper layer handle the rest. The console write function will busy wait (sclp_sync_wait) until a buffer is available again. Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-30[S390] showmem: Only walk spanned pages.Heiko Carstens
Convert show_mem() so its nearly the same as on x86/powerpc. Gives us proper locking and we get also rid of the only use of max_mapnr. Also the number of pages was contained in an int which might not be sufficient not too far in the future. Cc: Johannes Weiner <hannes@saeurebad.de> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-30[S390] appldata: prevent cpu hotplug when walking cpu_online_map.Gerald Schaefer
Use get_online_cpus() to prevent cpu hotplug in situations where for_each_online_cpu() is called. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-03 21:08:36 +0000