aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-05-24[PATCH] phy: new SMSC LAN83C185 PHY driverHerbert Valerio Riedel
new SMSC LAN83C185 10BaseT/100BaseTX PHY driver for the PHY subsystem Signed-off-by: Herbert Valerio Riedel <hvr@gnu.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24[PATCH] libata: add pio flush for via atapi (was: Re: TR: ASUS A8V Deluxe, ↵Albert Lee
x86_64) Backport the "pio flush" from the libata major update to 2.6.17 for via atapi. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24[netdrvr ibmlana, ibmveth] trim trailing whitespaceJeff Garzik
2006-05-24[PATCH] ibmveth change buffer pools dynamicallySantiago Leon
This patch provides a sysfs interface to change some properties of the ibmveth buffer pools (size of the buffers, number of buffers per pool, and whether a pool is active). Ethernet drivers use ethtool to provide this type of functionality. However, the buffers in the ibmveth driver can have an arbitrary size (not only regular, mini, and jumbo which are the only sizes that ethtool can change), and also ibmveth can have an arbitrary number of buffer pools Under heavy load we have seen dropped packets which obviously kills TCP performance. We have created several fixes that mitigate this issue, but we definitely need a way of changing the number of buffers for an adapter dynamically. Also, changing the size of the buffers allows users to change the MTU to something big (bigger than a jumbo frame) greatly improving performance on partition to partition transfers. The patch creates directories pool1...pool4 in the device directory in sysfs, each with files: num, size, and active (which default to the values in the mainline version). Comments and suggestions are welcome... -- Santiago A. Leon Power Linux Development IBM Linux Technology Center Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24[PATCH] drivers/net/s2io.c: make bus_speed[] staticAdrian Bunk
On Mon, May 15, 2006 at 12:56:37AM -0700, Andrew Morton wrote: >... > Changes since 2.6.17-rc3-mm1: >... > git-netdev-all.patch >... > git trees >... This patch makes the needlessly global bus_speed[] static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-05-24[PATCH] sky2: fix jumbo packet supportStephen Hemminger
The truncate threshold calculation to prevent receiver from getting stuck was incorrect, and it didn't take into account the upper limit on bits in the register so the jumbo packet support was broken. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24Merge branch 'upstream' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
2006-05-24[netdrvr pcnet_cs, myri] trim trailing whitespaceJeff Garzik
2006-05-24[PATCH] pcnet_cs: Add TRENDnet TE-CF100 ethernet adapter IDMarcin Juszkiewicz
Add TRENDnet TE-CF100 ethernet adapter to pcnet_cs list. product info: "Fast Ethernet", "CF Size PC Card", "1.0", "" manfid: 0x0149, 0xc1ab Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> drivers/net/pcmcia/pcnet_cs.c | 2 ++ 1 file changed, 2 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24[PATCH] Add Myri-10G Ethernet driverBrice Goglin
Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew J. Gallatin <gallatin@myri.com> drivers/net/Kconfig | 17 drivers/net/Makefile | 1 drivers/net/myri10ge/Makefile | 5 drivers/net/myri10ge/myri10ge.c | 2851 +++++++++++++++ drivers/net/myri10ge/myri10ge_mcp.h | 205 + drivers/net/myri10ge/myri10ge_mcp_gen_header.h | 58 include/linux/pci_ids.h | 1 7 files changed, 3138 insertions(+) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24[PATCH] Revive pci_find_ext_capabilityBrice Goglin
This patch revives pci_find_ext_capability (has been disabled a couple month ago since it was not used anywhere. See http://lkml.org/lkml/2006/1/20/247). It will now be used by the myri10ge driver. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew J. Gallatin <gallatin@myri.com> drivers/pci/pci.c | 3 +-- include/linux/pci.h | 2 ++ 2 files changed, 3 insertions(+), 2 deletions(-) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24Merge branch 'master' into upstreamJeff Garzik
2006-05-23[BRIDGE]: need to ref count the LLC sapStephen Hemminger
Bridge will OOPS on removal if other application has the SAP open. The bridge SAP might be shared with other usages, so need to do reference counting on module removal rather than explicit close/delete. Since packet might arrive after or during removal, need to clear the receive function handle, so LLC only hands it to user (if any). Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-23[NETFILTER]: SNMP NAT: fix memleak in snmp_object_decodeChris Wright
If kmalloc fails, error path leaks data allocated from asn1_oid_decode(). Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-23[NETFILTER]: H.323 helper: fix sequence extension parsingPatrick McHardy
When parsing unknown sequence extensions the "son"-pointer points behind the last known extension for this type, don't try to interpret it. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-23[NETFILTER]: H.323 helper: fix parser error propagationPatrick McHardy
The condition "> H323_ERROR_STOP" can never be true since H323_ERROR_STOP is positive and is the highest possible return code, while real errors are negative, fix the checks. Also only abort on real errors in some spots that were just interpreting any return value != 0 as error. Fixes crashes caused by use of stale data after a parsing error occured: BUG: unable to handle kernel paging request at virtual address bfffffff printing eip: c01aa0f8 *pde = 1a801067 *pte = 00000000 Oops: 0000 [#1] PREEMPT Modules linked in: ip_nat_h323 ip_conntrack_h323 nfsd exportfs sch_sfq sch_red cls_fw sch_hfsc xt_length ipt_owner xt_MARK iptable_mangle nfs lockd sunrpc pppoe pppoxx CPU: 0 EIP: 0060:[<c01aa0f8>] Not tainted VLI EFLAGS: 00210646 (2.6.17-rc4 #8) EIP is at memmove+0x19/0x22 eax: d77264e9 ebx: d77264e9 ecx: e88d9b17 edx: d77264e9 esi: bfffffff edi: bfffffff ebp: de6a7680 esp: c0349db8 ds: 007b es: 007b ss: 0068 Process asterisk (pid: 3765, threadinfo=c0349000 task=da068540) Stack: <0>00000006 c0349e5e d77264e3 e09a2b4e e09a38a0 d7726052 d7726124 00000491 00000006 00000006 00000006 00000491 de6a7680 d772601e d7726032 c0349f74 e09a2dc2 00000006 c0349e5e 00000006 00000000 d76dda28 00000491 c0349f74 Call Trace: [<e09a2b4e>] mangle_contents+0x62/0xfe [ip_nat] [<e09a2dc2>] ip_nat_mangle_tcp_packet+0xa1/0x191 [ip_nat] [<e0a2712d>] set_addr+0x74/0x14c [ip_nat_h323] [<e0ad531e>] process_setup+0x11b/0x29e [ip_conntrack_h323] [<e0ad534f>] process_setup+0x14c/0x29e [ip_conntrack_h323] [<e0ad57bd>] process_q931+0x3c/0x142 [ip_conntrack_h323] [<e0ad5dff>] q931_help+0xe0/0x144 [ip_conntrack_h323] ... Found by the PROTOS c07-h2250v4 testsuite. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-23Merge branch 'e1000-7.0.38-k4' of ↵Jeff Garzik
git://lost.foo-projects.org/~ahkok/git/netdev-2.6 into upstream
2006-05-23Merge branch 'master' into upstreamJeff Garzik
2006-05-23e1000: bump version to 7.0.38-k4Auke Kok
Signed-off-by: Auke Kok <auke.jan.h.kok@intel.com>
2006-05-23e1000: remove changelog in driverAuke Kok
This honours the request to remove the changelog in the driver code. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23e1000: Fix date string in MakefileAuke Kok
I forgot to update the date string in the Makefile last time. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23e1000: remove leading and trailing whitespace.Auke Kok
Some leading and trailing whitespace made it into the driver code here. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23e1000: remove backslash r debug printfsAuke Kok
This removes unwanted characters in the debug output that should have never been there. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23e1000: add shutdown handler back to fix WOLAuke Kok
Someone was waaay too aggressive and removed e1000's reboot notifier instead of porting it to the new way of the shutdown handler. This change broke wake on lan. Add the shutdown handler back in using the same method as e100 uses. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
2006-05-23IB/ipath: deref correct pointer when using kernel SMABryan O'Sullivan
At this point, the core QP structure hasn't been initialized, so what's in there isn't valid. Get the same information elsewhere. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: fix null deref during rdma opsBryan O'Sullivan
The problem was that node A's sending thread, which handles sending RDMA read response data, would write the trigger word, the last packet would be sent, node B would send a new RDMA read request, node A's interrupt handler would initialize s_rdma_sge, then node A's sending thread would update s_rdma_sge. This didn't happen very often naturally but was more frequent with 1 byte RDMA reads. Rather than adding more locking or increasing the QP structure size and copying sge data, I modified the copy routine to update the pointers before writing the trigger word to avoid the update race. Signed-off-by: Ralph Campbell <ralphc@pathscale.com> Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: register as IB device ownerBryan O'Sullivan
This fixes an oops. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: enable PE800 receive interrupts on user portsBryan O'Sullivan
Fixed so it works on the PE-800. It had not previously been updated to match PE-800 receive interrupt differences from HT-400. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: enable GPIO interrupt on HT-460Bryan O'Sullivan
This is required for even semi-decent performance on OpenIB. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: fix NULL dereference during cleanupBryan O'Sullivan
Fix NULL deref due to pcidev being clobbered before dd->ipath_f_cleanup() was called. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: replace uses of LIST_POISONBryan O'Sullivan
Per Andrew's request. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: fix reporting of driver version to userspaceBryan O'Sullivan
Fix the interface version that gets exported to userspace. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: don't modify QP if changes failBryan O'Sullivan
Make sure modify_qp won't modify the QP if any of the changes failed. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23IB/ipath: fix spinlock recursion bugBryan O'Sullivan
The local loopback path for RC can lock the rkey table lock without blocking interrupts. The receive interrupt path can then call ipath_rkey_ok() and deadlock. Remove the redundant lock. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-05-23V4L/DVB (4041): Fix compilation on PPC 64Mauro Carvalho Chehab
Those functions don't exist on PPC64 architecture. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-05-23V4L/DVB (4040a): Fix the following section warnings:Jean Delvare
reference to .init.text: from .text between 'dvb_bt8xx_probe' (at offset 0x122c) and 'dvb_bt8xx_remove' reference to .init.text: from .text between 'dvb_bt8xx_probe' (at offset 0x1267) and 'dvb_bt8xx_remove' Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-05-23V4L/DVB (4037): Make the bridge devices that depend on I2C dependant on I2CManu Abraham
Ref: Bugzilla 6179, 6589 Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-05-23V4L/DVB (3927): Fix VIDEO_DEV=m, VIDEO_V4L1_COMPAT=yAdrian Bunk
If CONFIG_VIDEO_DEV=m and CONFIG_VIDEO_V4L1_COMPAT=y, v4l1-compat should be built as a module (currently, it isn't built at all leading to problems with modules using it). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-05-23Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Respect gfp_t argument to dma_alloc_coherent().
2006-05-23Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: SNMP NAT: fix memory corruption [IRDA]: fixup type of ->lsap_state [IRDA]: fix 16/32 bit confusion [NET]: Fix "ntohl(ntohs" bugs [BNX2]: Use kmalloc instead of array [BNX2]: Fix bug in bnx2_nvram_write() [TG3]: Add some missing rx error counters
2006-05-23[PATCH] blk: fix gendisk->in_flight accounting during barrier sequenceJens Axboe
While executing barrrier sequence, the bar_rq which carries actual write was accounted as normal IO on completion, while it wasn't on queueing. This caused gendisk->in_flight to be decremented by 1 after each barrier thus messed up statistics. This patch makes bar_rq not accounted as normal IO. As the containing barrier request as a whole is accounted, part of it shouldn't be. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] powerpc: wire up sys_[gs]et_robust_listDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] powerpc: check Cell SPU syscall number range _before_ using itDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] powerpc: fill hole in Cell SPU syscall tableDavid Woodhouse
Syscall number 224 was absent from the table, which I believe means that the SPU can cause an oops by attempting to use it. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] orinoco: possible null pointer dereference in orinoco_rx_monitor()Florin Malita
If the skb allocation fails, the current error path calls dev_kfree_skb_irq() with a NULL argument. Also, 'err' is not being used. Coverity CID: 275. Signed-off-by: Florin Malita <fmalita@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] swsusp: fix typo in cr0 handlingPavel Machek
Writing cr0 to cr2 register can't be right. This fixes the typo. I wonder how it could survive so long. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] tty_insert_flip_string_flags() license fixTobias Powalowski
We still don't have the tty layer licensing compatibility quite right. tty_insert_flip_char() used to be inlined in include/linux/tty_flip.h. It is now out-of-lined and hence needs EXPORT_SYMBOL() to be back-compatible. One known offender is the Intel Modem driver. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] md: Make sure bi_max_vecs is set properly in bio_splitNeilBrown
Else a subsequent bio_clone might make a mess. Signed-off-by: Neil Brown <neilb@suse.de> Cc: "Don Dupuis" <dondster@gmail.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-23[PATCH] md: fix possible oops when starting a raid0 arrayNeilBrown
This loop that sets up the hash_table has problems. Careful examination will show that the last time through, everything but the first line is pointless. This is because all it does is change 'cur' and 'size' and neither of these are used after the loop. This should ring warning bells... That last time through the loop, size += conf->strip_zone[cur].size can index off the end of the strip_zone array. Depending on what it finds there, it might exit the loop cleanly, or it might spin going further and further beyond the array until it hits an unmapped address. This patch rearranges the code so that the last, pointless, iteration of the loop never happens. i.e. the one statement of the last loop that is needed is moved the the end of the previous loop - or to before the loop starts - and the loop counter starts from 1 instead of 0. Cc: "Don Dupuis" <dondster@gmail.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 00:47:59 +0000