aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-05V4L/DVB (13442): ivtv: Add module parameter to adjust I2C SCL clock period ↵Andy Walls
per board Add a module parameter to adjust I2C SCL clock period per board. This allows some experimental fine tuning by end users to overcome quirky I2C device problems. Reported-by: "Aleksandr V. Piskunov" <aleksandr.v.piskunov@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13441): ivtv: Added FM radio support to Avermedia AVerTV MCE 116 ↵Aleksandr V. Piskunov
Plus card Signed-off-by: Aleksandr V. Piskunov <alexandr.v.piskunov@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13440): ivtv: Update the cards definitions to add another AVerMedia ↵Andy Walls
M113 variant Add an AVerMedia M113 variant that was... Reported-by: Hiemanshu Sharma <hiemanshu@fedoraproject.org> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13438): zr364xx: add support for Trust Powerc@m 910ZAntoine Jacquet
Tested-by: Enrique Dominguez <enrique.pinos@gmail.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13434): cx18: Bump version number due to significant buffer ↵Andy Walls
handling changes. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13433): cx18: Remove duplicate list traversal when processing ↵Andy Walls
incoming MDLs Update the incoming MDL's buffers' bytesused and sync the buffers for the cpu in one pass instead of two. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13432): cx18: Adjust encoder VBI MDL size to be exactly frame's ↵Andy Walls
worth of VBI data Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13431): cx18: Adjust an MDL's final buffer size to force encoder ↵Andy Walls
transfer size The encoder was not honoring the MDL size sent in DE_SET_MDL mailbox commands. This change adjusts the size of the last buffer in an MDL, as reported to the firmware, so that the encoder will send the exact amount of bytes we specify per MDL transfer. This eliminates tearing in YUV playback when using non-default YUV buffer sizes. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13430): cx18: Fix YUV capture so that encoder passes a single frame ↵Andy Walls
per transfer Fix YUV capture such that the encoder will pass one frame per transfer. This will allow the application to maintain frame alignment when a transfer from the encoder is missed due to high system latency in service the CX23418 IRQ. Also force YUV buffer sizes to be specified in multiples of 33.75 kB, the smalled amount of buffer sizes need to store a complete set of HM12 4:2:0 macroblocks specifying 32 lines of the frame. A full 60Hz/525 line screen requires 15 * 33.75 kB per frame and a full 50Hz/625 line screen requires 18 * 33.75 kB per frame so the default buffer size is 3 * 33.75 kB, requiring exactly 5 or 6 buffers per MDL respectively. The bytes needed per frame and hence MDL need not be the bytes in an integer number of buffers. However, if frame artifacts are seen with scaled screen sizes, the YUV buffer size can be set 34 kB (33.75 kB) to get rid of the artifacts at the cost of more copies between the kernel and userspace. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13429): cx18: Add Memory Descriptor List (MDL) layer to buffer handlingAndy Walls
Add a Memory Descriptor List (MDL) layer to buffer handling to implement scatter-gather I/O. Currently there is still only 1 buffer per MDL. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13428): cx18: Rename mdl_offset to mdl_base_idx or free_mdl_idx as ↵Andy Walls
appropriate Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13427): cx18: Rename struct cx18_queue.buffers to struct ↵Andy Walls
cx18_queue.depth Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13426): cx18: Rename struct cx18_mdl to struct cx18_mdl_entAndy Walls
Rename type in anticipation of implementing a struct cx18_mdl type that actually keeps track of a memory descriptor list. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13425): gspca - ov534: Bad name of the ov965x 320x240 resolution.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13424): gspca - ov534: Fix ov772x brightness and ov965x frame rate.Jean-Francois Moine
- the ov772x brightness was not setteble (fixed by M. Thrun) - the set_frame_rate function does not work for ov965x Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13423): gspca - ov534: More ov772x changes from Max Thrun.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13422): gspca - ov534: ov772x changes from Richard Kaswy.Jean-Francois Moine
- 320x240 resolution added - controls added - different sd_desc tables Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13421): gspca - main: Clearer message when bandwidth too small.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13420): gspca - doc: Change the name of some webcams.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13419): gspca - pac7302: Add debug register write interface.Márton Németh
Add debug register write interface to pac7302 to be able to set for example the edge detect mode (bit 2 register 0x55) or the test pattern (bit 0..3, register 0x72) and test overlay (bit 4, register 0x72) from the user space. Only write of register page 0 is supported by this patch. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13418): gspca - pac7311: Stop sending URBs on first error.Márton Németh
Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13417): Fix videobuf_queue_vmalloc_init() prototypeJonathan Corbet
For whatever reason, the device structure pointer to videobuf_queue_vmalloc_init is typed "void *", even though it's passed right through to videobuf_queue_core_init(), which expects a struct device pointer. The other videobuf implementations use struct device *; I think vmalloc should too. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13416): smssdio: initialize return valueMárton Németh
The return value may be used uninitialized when the size parameter happens to be 0. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13415): videobuf-core: explicitly cast page countMárton Németh
Explicitly cast page count in the debug message. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13414): ttusb-dec: do not overwrite the first part of phys stringMárton Németh
Use strlcat() to append a string to the previously created first part. The semantic match that finds this kind of problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression dev; expression phys; expression str; expression size; @@ usb_make_path(dev, phys, size); - strlcpy(phys, str, size); + strlcat(phys, str, size); // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13413): introduce missing kfreeJulia Lawall
Error handling code following a kzalloc should free the allocated data. Similarly for usb-alloc urb. The semantic match that finds the first problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB: Fix test in copy_reg_bits()Roel Kluin
The reg_pair2[j].reg was tested twice. Cc: <stable@kernel.org> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13410): firedtv: remove an unnecessary function argumentStefan Richter
All read transactions initiated by firedtv are only quadlet-sized, hence the backend->read call can be simplified a little. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13409): firedtv: packet requeuing is likely to succeedStefan Richter
Packet DMA buffers are queued either initially all at once (then, a queueing failure will cause firedtv to release the DMA context as a whole) or subsequently one by one as they recycled after use (then a failure is extremely unlikely). Therefore we can be a little less cautious when counting at which packet buffer to set the interrupt flag. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13408): firedtv: shrink buffer pointer tableStefan Richter
Cache only addresses of whole pages, not of each buffer chunk. Besides, page addresses can be obtained by page_address() instead of kmap() since they were allocated in lowmem. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13407): Add Prof 7301 PCI DVB-S2 cardIgor M. Liplianin
Add Prof 7301 PCI DVB-S2 card The card based on stv0903 demod, stb6100 tuner. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB: pt1: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in drivers/media/dvb/pt1/pt1.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13402): radio-mr800 - autosuspend for radio-mr800 driverOliver Neukum
Patch adds autosuspend support for mr800 radio driver. Signed-off-by: Oliver Neukum <oliver@neukum.org> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13400): firedtv: port to new firewire coreStefan Richter
The firedtv DVB driver will now work not only on top of the old ieee1394 driver stack but also on the new firewire driver stack. Alongside to the firedtv-1394.c backend for driver binding and I/O, the firedtv-fw.c backend is added. Depending on which of the two 1394 stacks is configured, one or the other or both backends will be built into the firedtv driver. This has been tested with a DVB-T and a DVB-C box on x86-64 and x86-32 together with a few different controllers (Agere FW323, a NEC chip, TI TSB82AA2, TSB43AB22/A, VIA VT6306). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13399): firedtv: add missing include, rename a constantStefan Richter
Add #include <dvb_demux.h> for dvb_dmx_swfilter_packets(). This was already indirectly included via firedtv.h, but don't rely on it. The 4 bytes which were referred to as FIREWIRE_HEADER_SIZE are actually the source packet header from IEC 61883-4 (MPEG2-TS data transmission over 1394), not e.g. the IEEE 1394 isochronous packet header. So choose a more precise name. Also, express the payload size as a preprocessor constant too. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13398): firedtv: reform lock transaction backend callStefan Richter
Preparation for the port of firedtv to the firewire-core kernel API: The fdtv->backend->lock() hook and thus the CMP code is slightly changed to better fit with the new API. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13397): firedtv: move remote control workqueue handling into rc ↵Stefan Richter
source file Preparation for the port of firedtv to the firewire-core kernel API: Canceling of the remote control workqueue job is factored into firedtv-rc.c. Plus trivial whitespace change. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13396): correct initialization of audio_modeJulia Lawall
This initialization of the value of audio_mode is the one used if nothing matches in the subsequent switch. The variable audio_mode is subsequently assigned to constants such as TUNER_AUDIO_MONO and TUNER_AUDIO_STEREO. TUNER_AUDIO_STEREO has the same value as V4L2_TUNER_MODE_STEREO, so it would seem better to use that value here. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13394): pt1: Support FE_READ_SNRhiranotaka@zng.jp
Signed-off-by: HIRANO Takahito <hiranotaka@zng.info> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13389): gspca - pac7302: Handle return values in sd_start().Marton Nemeth
Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13388): gspca - pac7302: Add white balance control.Marton Nemeth
Signed-off-by: Marton Nemeth <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13387): gspca - main: Fix a compilation warning.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13386): gspca - main: Change version to 2.8.0.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13385): gspca - pac7302: Add red and blue balance control.Márton Németh
The valid values for these controls are 0..3 (lower two bits) which was identified by trial and error on Labtec Webcam 2200 (USB ID 093a:2626). The upper 6 bits are ignored on page 0, registers 0xc5 and 0xc7 by the camera. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13384): gspca - sonixj: Optimize code and add some comments.Jean-Francois Moine
- the i2c base address is now taken from the sn9c1xx register table Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13383): gspca - pac7311/pac7302: Propagate error to higher level ↵Márton Németh
software. The usb_control_msg() can fail any time. Only continue writing sequence if there was no error with the previous write. If there was any problem stop sending URBs and propagate the error to the gspca_main. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13382): gspca - pac7302: Remove redundant stream off command.Márton Németh
The stream off command is sent to the device twice, one is enough. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13380): sms-cards: make id unsigned in sms_get_board()Roel Kluin
Make id signed so we can't get an invalid pointer when we pass a negative id. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13379): quickcam_messenger: possible buffer overflow while use strncatAlexander Strakh
In driver ./drivers/media/video/usbvideo/quickcam_messenger.c in line 91: 91 usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); After this line we use strncat: 92 strncat(cam->input_physname, "/input0", sizeof(cam->input_physname)); where sizeof(cam->input_physname) returns length of cam->input_phisname without length for null-symbol. But this parameter must be - "maximum numbers of bytes to copy", i.e.: sizeof(cam->input_physname)-strlen(cam->input_physname)-1. In this case, after call to usb_make_path the similar drivers use strlcat. Like in: drivers/hid/usbhid/hid-core.c: 1152 usb_make_path(dev, hid->phys, sizeof(hid->phys)); 1153 strlcat(hid->phys, "/input", sizeof(hid->phys)); Found by Linux Driver Verification Project. Use strlcat instead of strncat. Signed-off-by: Alexander Strakh <strakh@ispras.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13378): konicawc.c: possible buffer overflow while use strncatAlexander Strakh
In driver ./drivers/media/video/usbvideo/konicawc.c in line 227: 227 usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname)); After this line we use strncat: 228 strncat(cam->input_physname, "/input0", sizeof(cam->input_physname)); where sizeof(cam->input_physname) returns length of cam->input_phisname without length for null-symbol. But this parameter must be - "maximum numbers of bytes to copy", i.e.: sizeof(cam->input_physname)-strlen(cam->input_physname)-1. In this case, after call to usb_make_path the similar drivers use strlcat. Like in drivers/hid/usbhid/hid-core.c: 1152 usb_make_path(dev, hid->phys, sizeof(hid->phys)); 1153 strlcat(hid->phys, "/input", sizeof(hid->phys)); Found by Linux Driver Verification Project. Use strlcat instead of strncat. Signed-off-by: Alexander Strakh <strakh@ispras.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 21:20:47 +0000