aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-10-07udp: dynamically size hash tables at boot timeEric Dumazet
UDP_HTABLE_SIZE was initialy defined to 128, which is a bit small for several setups. 4000 active UDP sockets -> 32 sockets per chain in average. An incoming frame has to lookup all sockets to find best match, so long chains hurt latency. Instead of a fixed size hash table that cant be perfect for every needs, let UDP stack choose its table size at boot time like tcp/ip route, using alloc_large_system_hash() helper Add an optional boot parameter, uhash_entries=x so that an admin can force a size between 256 and 65536 if needed, like thash_entries and rhash_entries. dmesg logs two new lines : [ 0.647039] UDP hash table entries: 512 (order: 0, 4096 bytes) [ 0.647099] UDP Lite hash table entries: 512 (order: 0, 4096 bytes) Maximal size on 64bit arches would be 65536 slots, ie 1 MBytes for non debugging spinlocks. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07IPv6: Fix 6RD typoAlexandre Cassen
Following fix a small typo. Signed-off-by: Alexandre Cassen <acassen@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07ipv4: Define cipso_v4_delopt staticHagen Paul Pfeifer
There is no reason that cipso_v4_delopt() is not defined as a static function. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07econet: Fix redeclaration of symbol lenHagen Paul Pfeifer
Function argument len was redeclarated within the function. This patch fix the redeclaration of symbol 'len'. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07bonding: remove useless assignmentNicolas de Pesloüan
The variable old_active is first set to bond->curr_active_slave. Then, it is unconditionally set to new_active, without being used in between. The first assignment, having no side effect, is useless. Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07bonding: fix a parameter name in error messageNicolas de Pesloüan
When parsing module parameters, bond_check_params() erroneously use 'xor_mode' as the name of a module parameter in an error message. The right name for this parameter is 'xmit_hash_policy'. Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07IPv6: use ipv6_addr_set_v4mapped()Brian Haley
Might as well use the ipv6_addr_set_v4mapped() inline we created last year. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07IPv6: use ipv6_addr_copy() in ip6_route_redirect()Brian Haley
Change ip6_route_redirect() to use ipv6_addr_copy(). Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07IPv6: Fix 6RD build errorBrian Haley
Fix build error introduced in commit fa857afcf - ipv6 sit: 6rd (IPv6 Rapid Deployment) Support. Struct in6_addr is the issue. I'm only seeing this on x86_64 systems, not on 32-bit with same IPv6 config options, so it could be there's a missing forward declaration somewhere, but including the correct header file fixes the problem too. CC [M] net/ipv6/ip6_tunnel.o In file included from net/ipv6/ip6_tunnel.c:31: include/linux/if_tunnel.h:59: error: field ‘prefix’ has incomplete type make[2]: *** [net/ipv6/ip6_tunnel.o] Error 1 make[1]: *** [net/ipv6] Error 2 Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07net: Add sk_mark route lookup support for IPv4 listening socketsAtis Elsts
Add support for route lookup using sk_mark on IPv4 listening sockets. Signed-off-by: Atis Elsts <atis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07dccp ccid-3: Remove CCID naming redundancy 2/2Gerrit Renker
This continues the previous patch, by applying the same change to CCID-3. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07dccp ccid-2: Remove CCID naming redundancy 1/2Gerrit Renker
This removes a redundancy in the CCID half-connection (hc) naming scheme: * instead of 'hctx->tx_...', write 'hc->tx_...'; * instead of 'hcrx->rx_...', write 'hc->rx_...'; which works because the 'type' of the half-connection is encoded in the 'rx_' / 'tx_' prefixes. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07dccp ccid-3: Overhaul CCID naming convention 2/2Gerrit Renker
This implements the new naming scheme also for CCID-3. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07dccp ccid-2: Overhaul CCID naming convention 1/2Gerrit Renker
This patch starts a less problematic naming convention for CCID structs. The old naming convention used 'hc{tx,rx}->ccid?hc{tx,rx}->...' as recurring prefixes, which made the code * hard to write (not easy to fit into 80 characters); * hard to read (most of the space is occupied by prefixes). The new naming scheme: * struct entries for the TX socket are prefixed by 'tx_'; * and those for the RX socket are prefixed by 'rx_'. The identifiers then remain distinguishable when grep-ing through the tree: (a) RX/TX sockets are distinguished by the naming scheme, (b) individual CCIDs are distinguished by filename (ccid{2,3,4}.{c,h}). This first patch implements the scheme for CCID-2. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07be2net: Get rid of net_device_stats from adapter.Ajit Khaparde
adapter doesnot need to maintain a copy of net_device_stats. Use the one already available in net_device. This patch takes care of the same. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07dcb: data center bridging ops should be r/oStephen Hemminger
The data center bridging ops structure can be const Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07net: mark net_proto_ops as constStephen Hemminger
All usages of structure net_proto_ops should be declared const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07make TLLAO option for NA packets configurableOctavian Purdila
On Friday 02 October 2009 20:53:51 you wrote: > This is good although I would have shortened the name. Ah, I knew I forgot something :) Here is v4. tavi >From 24d96d825b9fa832b22878cc6c990d5711968734 Mon Sep 17 00:00:00 2001 From: Octavian Purdila <opurdila@ixiacom.com> Date: Fri, 2 Oct 2009 00:51:15 +0300 Subject: [PATCH] ipv6: new sysctl for sending TLLAO with unicast NAs Neighbor advertisements responding to unicast neighbor solicitations did not include the target link-layer address option. This patch adds a new sysctl option (disabled by default) which controls whether this option should be sent even with unicast NAs. The need for this arose because certain routers expect the TLLAO in some situations even as a response to unicast NS packets. Moreover, RFC 2461 recommends sending this to avoid a race condition (section 4.4, Target link-layer address) Signed-off-by: Cosmin Ratiu <cratiu@ixiacom.com> Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07Use sk_mark for IPv6 routing lookupsBrian Haley
Atis Elsts wrote: > Not sure if there is need to fill the mark from skb in tunnel xmit functions. In any case, it's not done for GRE or IPIP tunnels at the moment. Ok, I'll just drop that part, I'm not sure what should be done in this case. > Also, in this patch you are doing that for SIT (v6-in-v4) tunnels only, and not doing it for v4-in-v6 or v6-in-v6 tunnels. Any reason for that? I just sent that patch out too quickly, here's a better one with the updates. Add support for IPv6 route lookups using sk_mark. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07ethtool: Add reset operationBen Hutchings
After updating firmware stored in flash, users may wish to reset the relevant hardware and start the new firmware immediately. This should not be completely automatic as it may be disruptive. A selective reset may also be useful for debugging or diagnostics. This adds a separate reset operation which takes flags indicating the components to be reset. Drivers are allowed to reset only a subset of those requested, and must indicate the actual subset. This allows the use of generic component masks and some future expansion. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07pkt_sched: gen_estimator: Dont report fake rate estimatorsEric Dumazet
Jarek Poplawski a écrit : > > > Hmm... So you made me to do some "real" work here, and guess what?: > there is one serious checkpatch warning! ;-) Plus, this new parameter > should be added to the function description. Otherwise: > Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> > > Thanks, > Jarek P. > > PS: I guess full "Don't" would show we really mean it... Okay :) Here is the last round, before the night ! Thanks again [RFC] pkt_sched: gen_estimator: Don't report fake rate estimators We currently send TCA_STATS_RATE_EST elements to netlink users, even if no estimator is running. # tc -s -d qdisc qdisc pfifo_fast 0: dev eth0 root bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 Sent 112833764978 bytes 1495081739 pkt (dropped 0, overlimits 0 requeues 0) rate 0bit 0pps backlog 0b 0p requeues 0 User has no way to tell if the "rate 0bit 0pps" is a real estimation, or a fake one (because no estimator is active) After this patch, tc command output is : $ tc -s -d qdisc qdisc pfifo_fast 0: dev eth0 root bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 Sent 561075 bytes 1196 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 We add a parameter to gnet_stats_copy_rate_est() function so that it can use gen_estimator_active(bstats, r), as suggested by Jarek. This parameter can be NULL if check is not necessary, (htb for example has a mandatory rate estimator) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07net/ppp: fix comments - ppp_{sync,asynctty}_receive() may sleepTilman Schmidt
The receive_buf methods of the N_PPP and N_SYNC_PPP line disciplines, ppp_asynctty_receive() and ppp_sync_receive(), call tty_unthrottle() which may sleep. Fix the comments claiming otherwise. Impact: documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07bonding: introduce primary_reselect optionJiri Pirko
In some cases there is not desirable to switch back to primary interface when it's link recovers and rather stay with currently active one. We need to avoid packetloss as much as we can in some cases. This is solved by introducing primary_reselect option. Note that enslaved primary slave is set as current active no matter what. Patch modified by Jay Vosburgh as follows: fixed bug in action after change of option setting via sysfs, revised the documentation update, and bumped the bonding version number. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07Use sk_mark for routing lookup in more placesEric Dumazet
Here is a followup on this area, thanks. [RFC] af_packet: fill skb->mark at xmit skb->mark may be used by classifiers, so fill it in case user set a SO_MARK option on socket. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07ipv6 sit: 6rd (IPv6 Rapid Deployment) Support.YOSHIFUJI Hideaki / 吉藤英明
IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly deploy IPv6 unicast service to IPv4 sites to which it provides customer premise equipment. Like 6to4, it utilizes stateless IPv6 in IPv4 encapsulation in order to transit IPv4-only network infrastructure. Unlike 6to4, a 6rd service provider uses an IPv6 prefix of its own in place of the fixed 6to4 prefix. With this option enabled, the SIT driver offers 6rd functionality by providing additional ioctl API to configure the IPv6 Prefix for in stead of static 2002::/16 for 6to4. Original patch was done by Alexandre Cassen <acassen@freebox.fr> based on old Internet-Draft. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07add vif using local interface index instead of IPIlia K
When routing daemon wants to enable forwarding of multicast traffic it performs something like: struct vifctl vc = { .vifc_vifi = 1, .vifc_flags = 0, .vifc_threshold = 1, .vifc_rate_limit = 0, .vifc_lcl_addr = ip, /* <--- ip address of physical interface, e.g. eth0 */ .vifc_rmt_addr.s_addr = htonl(INADDR_ANY), }; setsockopt(fd, IPPROTO_IP, MRT_ADD_VIF, &vc, sizeof(vc)); This leads (in the kernel) to calling vif_add() function call which search the (physical) device using assigned IP address: dev = ip_dev_find(net, vifc->vifc_lcl_addr.s_addr); The current API (struct vifctl) does not allow to specify an interface other way than using it's IP, and if there are more than a single interface with specified IP only the first one will be found. The attached patch (against 2.6.30.4) allows to specify an interface by its index, instead of IP address: struct vifctl vc = { .vifc_vifi = 1, .vifc_flags = VIFF_USE_IFINDEX, /* NEW */ .vifc_threshold = 1, .vifc_rate_limit = 0, .vifc_lcl_ifindex = if_nametoindex("eth0"), /* NEW */ .vifc_rmt_addr.s_addr = htonl(INADDR_ANY), }; setsockopt(fd, IPPROTO_IP, MRT_ADD_VIF, &vc, sizeof(vc)); Signed-off-by: Ilia K. <mail4ilia@gmail.com> === modified file 'include/linux/mroute.h' Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: add Kernel CAPI interface (v3)Tilman Schmidt
Add a Kernel CAPI interface to the Gigaset driver. Impact: optional new functionality Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: allow building without I4LTilman Schmidt
Add a dummy LL interface to the Gigaset driver so that it can be built and, in a limited way, used without the ISDN4Linux subsystem. Impact: new configuration alternative Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: prepare for CAPI implementationTilman Schmidt
Reorganize the code of the Gigaset driver, moving all isdn4linux dependencies to the source file i4l.c so that it can be replaced by a file capi.c interfacing to Kernel CAPI instead. Impact: refactoring, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-06gigaset: add kerneldoc commentsTilman Schmidt
Add kerneldoc comments to some functions in the Gigaset driver. Impact: documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: correct debugging output selectionTilman Schmidt
Dump payload data consistently only when DEBUG_STREAM_DUMP debug bit is set. Impact: debugging aid Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: improve error recoveryTilman Schmidt
When the Gigaset base stops responding, try resetting the USB connection to recover. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: fix device ERROR response handlingTilman Schmidt
Clear out pending command that got rejected with 'ERROR' response. This fixes the bug where unloading the driver module would hang with the message: "gigaset: not searching scheduled commands: busy" after a device communication error. Impact: error handling bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: announce if built with debuggingTilman Schmidt
Mention in the driver load announcement whether the driver was built with debugging messages enabled, to facilitate support. Impact: informational message Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: handle isoc frame errors more gracefullyTilman Schmidt
Don't drop the remainder of an URB if an isochronous frame has an error. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: linearize skbTilman Schmidt
The code of the Gigaset driver assumes that sk_buff-s coming from the ISDN4Linux subsystem are always linear. Explicitly calling skb_linearize() is cheap if they are, but much more robust in case they ever aren't. Impact: robustness improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06gigaset: fix reject/hangup handlingTilman Schmidt
Signal D channel disconnect in a few cases where it was missed, including when an incoming call is disconnected before it was accepted. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06isdn: make capidrv module parameter "debugmode" writeableTilman Schmidt
Being able to change the debugmode module parameter of capidrv on the fly is quite useful for debugging and doesn't do any harm. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06isdn: avoid races in capidrvTilman Schmidt
In several places, capidrv sends a CAPI message to the ISDN device and then updates its internal state accordingly. If the response message from the device arrives before the state is updated, it may be rejected or processed incorrectly. Avoid these races by updating the state before emitting the message. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06isdn: accept CAPI Informational Info values as successTilman Schmidt
Info values in the 0x00xx range are defined in the CAPI standard as "Informational, message processed successfully". Therefore a CONNECT_B3_CONF message with an Info value in that range should open an NCCI just as with Info==0. Impact: minor bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06Documentation: expand isdn/INTERFACE.CAPI documentTilman Schmidt
- Note that send_message() may be called in interrupt context. - Describe the storage of CAPI messages and payload data in SKBs. - Add more details to the description of the _cmsg structure. - Describe kernelcapi debugging output. Impact: documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06be2net: Bug fix to properly update ethtool tx-checksumming after ethtool -K ↵Ajit Khaparde
<ifname> tx off This is a fix for a bug which was a result of wrong use of checksum offload flag. The status of tx-checksumming was not changed from on to off after a 'ethtool -K <ifname> tx off' operation. Use the proper checksum offload flag NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM. Patch is against net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06be2net: Fix a typo in be_cmds.hAjit Khaparde
MCC_STATUS_NOT_SUPPORTED should be decimal 66 not hex 66. This patch fixes this typo. Patch against net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06be2net: Bug Fix while accounting of multicast frames during netdev stats updateAjit Khaparde
While updating the statistics to be passed via the get_stats, tx multicast frames were being accounted instead of rx multicast frames. This patch fixes the bug. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06qlge: Fix lock/mutex warnings.Ron Mercer
Get rid of spinlock and private mutex usage for exclusive access to the HW semaphore register. rtnl_lock already creates exclusive access to this register in all driver API. Add rtnl to firmware worker threads that also use the HW semaphore register. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06qlge: Fix queueing of firmware handler in ISR.Ron Mercer
Check that we are not already polling firmware events before we queue the firmware event worker, then disable firmware interrupts. Otherwise we can queue the same event multiple times. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06qlge: Fix some bit definitions for reset register.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06net: speedup sk_wake_async()Eric Dumazet
An incoming datagram must bring into cpu cache *lot* of cache lines, in particular : (other parts omitted (hash chains, ip route cache...)) On 32bit arches : offsetof(struct sock, sk_rcvbuf) =0x30 (read) offsetof(struct sock, sk_lock) =0x34 (rw) offsetof(struct sock, sk_sleep) =0x50 (read) offsetof(struct sock, sk_rmem_alloc) =0x64 (rw) offsetof(struct sock, sk_receive_queue)=0x74 (rw) offsetof(struct sock, sk_forward_alloc)=0x98 (rw) offsetof(struct sock, sk_callback_lock)=0xcc (rw) offsetof(struct sock, sk_drops) =0xd8 (read if we add dropcount support, rw if frame dropped) offsetof(struct sock, sk_filter) =0xf8 (read) offsetof(struct sock, sk_socket) =0x138 (read) offsetof(struct sock, sk_data_ready) =0x15c (read) We can avoid sk->sk_socket and socket->fasync_list referencing on sockets with no fasync() structures. (socket->fasync_list ptr is probably already in cache because it shares a cache line with socket->wait, ie location pointed by sk->sk_sleep) This avoids one cache line load per incoming packet for common cases (no fasync()) We can leave (or even move in a future patch) sk->sk_socket in a cold location Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-06vxge: Version update.Sreenivasa Honnur
- Version Update. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-19 16:28:25 +0000