aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-14[NETFILTER]: nf_conntrack: UDPLITE supportPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: nf_conntrack: mark protocols __read_mostlyPatrick McHardy
Also remove two unnecessary EXPORT_SYMBOLs and move the nf_conntrack_l3proto_ipv4 declaration to the correct file. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: x_tables: add connlimit matchJan Engelhardt
ipt_connlimit has been sitting in POM-NG for a long time. Here is a new shiny xt_connlimit with: * xtables'ified * will request the layer3 module (previously it hotdropped every packet when it was not loaded) * fixed: there was a deadlock in case of an OOM condition * support for any layer4 protocol (e.g. UDP/SCTP) * using jhash, as suggested by Eric Dumazet * ipv6 support Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: Lower *tables printk severityPatrick McHardy
Lower ip6tables, arptables and ebtables printk severity similar to Dan Aloni's patch for iptables. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: nf_conntrack: Don't track locally generated special ICMP errorYasuyuki Kozakai
The conntrack assigned to locally generated ICMP error is usually the one assigned to the original packet which has caused the error. But if the original packet is handled as invalid by nf_conntrack, no conntrack is assigned to the original packet. Then nf_ct_attach() cannot assign any conntrack to the ICMP error packet. In that case the current nf_conntrack_icmp assigns appropriate conntrack to it. But the current code mistakes the direction of the packet. As a result, NAT code mistakes the address to be mangled. To fix the bug, this changes nf_conntrack_icmp not to assign conntrack to such ICMP error. Actually no address is necessary to be mangled in this case. Spotted by Jordan Russell. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: nf_conntrack: Introduces nf_ct_get_tuplepr and uses itYasuyuki Kozakai
nf_ct_get_tuple() requires the offset to transport header and that bothers callers such as icmp[v6] l4proto modules. This introduces new function to simplify them. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: nf_conntrack: make l3proto->prepare() generic and renames itYasuyuki Kozakai
The icmp[v6] l4proto modules parse headers in ICMP[v6] error to get tuple. But they have to find the offset to transport protocol header before that. Their processings are almost same as prepare() of l3proto modules. This makes prepare() more generic to simplify icmp[v6] l4proto module later. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NETFILTER]: nf_conntrack: Increment error count on parsing IPv4 headerYasuyuki Kozakai
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NET]: Add ethtool support for NETIF_F_IPV6_CSUM devices.Michael Chan
Add ethtool utility function to set or clear IPV6_CSUM feature flag. Modify tg3.c and bnx2.c to use this function when doing ethtool -K to change tx checksum. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[AF_IUCV]: Add lock when updating accept_qUrsula Braun
The accept_queue of an af_iucv socket will be corrupted, if adding and deleting of entries in this queue occurs at the same time (connect request from one client, while accept call is processed for another client). Solution: add locking when updating accept_q Signed-off-by: Ursula Braun <braunu@de.ibm.com> Acked-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[AF_IUCV]: Avoid deadlock between iucv_path_connect and tasklet.Ursula Braun
An iucv deadlock may occur, where one CPU is spinning on the iucv_table_lock for iucv_tasklet_fn(), while another CPU is holding the iucv_table_lock for an iucv_path_connect() and is waiting for the first CPU in an smp_call_function. Solution: replace spin_lock in iucv_tasklet_fn by spin_trylock and reschedule tasklet in case of non-granted lock. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Acked-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[AF_IUCV]: Improve description of IUCV and AFIUCV configuration options.Jennifer Hunt
Signed-off-by: Jennifer Hunt <jenhunt@us.ibm.com> Signed-off-by: Ursula Braun >braunu@de.ibm.com> Acked-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[INET_SOCK]: make net/ipv4/inet_timewait_sock.c:__inet_twsk_kill() staticAdrian Bunk
This patch makes the needlessly global __inet_twsk_kill() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2007-07-14[TCP]: tcp probe add back ssthresh fieldStephen Hemminger
Sangtae noticed the ssthresh got missed. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[VLAN]: Fix memset lengthPatrick McHardy
Fix sizeof(ETH_ALEN) Introduced by my rtnl_link patches. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NET]: Add macvlan driverPatrick McHardy
Add macvlan driver, which allows to create virtual ethernet devices based on MAC address. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[VLAN]: Use multicast list synchronization helpersPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[VLAN]: Fix promiscous/allmulti synchronization racesPatrick McHardy
The set_multicast_list function may be called without holding the rtnl mutex, resulting in races when changing the underlying device's promiscous and allmulti state. Use the change_rx_mode hook, which is always invoked under the rtnl. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NET]: dev_mcast: add multicast list synchronization helpersPatrick McHardy
The method drivers currently use to synchronize multicast lists is not very pretty: - walk the multicast list - search each entry on a copy of the previous list - if new add to lower device - walk the copy of the previous list - search each entry on the current list - if removed delete from lower device - copy entire list This patch adds a new field to struct dev_addr_list to store the synchronization state and adds two helper functions for synchronization and cleanup. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[NET]: Add net_device change_rx_mode callbackPatrick McHardy
Currently the set_multicast_list (and set_rx_mode) callbacks are responsible for configuring the device according to the IFF_PROMISC, IFF_MULTICAST and IFF_ALLMULTI flags and the mc_list (and uc_list in case of set_rx_mode). These callbacks can be invoked from BH context without the rtnl_mutex by dev_mc_add/dev_mc_delete, which makes reading the device flags and promiscous/allmulti count racy. For real hardware drivers that just commit all changes to the hardware this is not a real problem since the stack guarantees to call them for every change, so at least the final call will not race and commit the correct configuration to the hardware. For software devices that want to synchronize promiscous and multicast state to an underlying device however this can cause corruption of the underlying device's flags or promisc/allmulti counts. When the software device is concurrently put in promiscous or allmulti mode while set_multicast_list is invoked from bottem half context, the device might synchronize the change to the underlying device without holding the rtnl_mutex, which races with concurrent changes to the underlying device. Add a dev->change_rx_flags hook that is invoked when any of the flags that affect rx filtering change (under the rtnl_mutex), which allows drivers to perform synchronization immediately and only synchronize the address lists in set_multicast_list/set_rx_mode. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[RFKILL]: fix net/rfkill/rfkill-input.c bug on 64-bit systemsIngo Molnar
Subject: [patch] net/input: fix net/rfkill/rfkill-input.c bug on 64-bit systems this recent commit: commit cf4328cd949c2086091c62c5685f1580fe9b55e4 Author: Ivo van Doorn <IvDoorn@gmail.com> Date: Mon May 7 00:34:20 2007 -0700 [NET]: rfkill: add support for input key to control wireless radio added this 64-bit bug: .... unsigned int flags; spin_lock_irqsave(&task->lock, flags); .... irq 'flags' must be unsigned long, not unsigned int. The -rt tree has strict checks about this on 64-bit so this triggered a build failure. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14[SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMACornelia Huck
With dma-mapping-prevent-dma-dependent-code-from-linking-on.patch scsi fails to build on !HAS_DMA architectures: drivers/built-in.o(.text+0x20af6): In function `scsi_dma_map': : undefined reference to `dma_map_sg' drivers/built-in.o(.text+0x20b5c): In function `scsi_dma_unmap': : undefined reference to `dma_unmap_sg' I split those functions out into a new file. Builds on s390 and i386. Move scsi_dma_{map,unmap} into scsi_lib_dma.c which is only build if HAS_DMA is set. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] Clean up scsi_add_lun a bitMatthew Wilcox
This patch tidies up scsi_add_lun a bit. I rewrote the kerneldoc to match the actual parameters, moved the check for RBC and MMC REPORT_LUN devices away from the switch(), changed the setup of sdev->type to account for BLIST_ISROM, moved the check for BLIST_NO_ULD_ATTACH further down in the function, removed a bogus comment and fixed some whitespace issues. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] 53c700: Remove printk, which triggers because of low scsi clock on ↵Thomas Bogendoerfer
SNI RMs remove printk, which triggers because of low scsi clock on SNI RMs Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] sni_53c710: CleanupThomas Bogendoerfer
- base address is now a physical address; no need to convert it - remove not needed error printk in module init function Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] qla4xxx: Fix underrun/overrun conditionsDavid C Somayajulu
On Wed, 2007-06-06 at 11:55 -0700, David C Somayajulu wrote: This patch fixes the code handling underrun and overrun conditions. Also fixed coding style as per Mike Christie's advice. Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] megaraid_mbox: use mutex instead of semaphoreMatthias Kaehlcke
The Megaraid Mailbox driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Acked-by: "Patro, Sumant" <Sumant.Patro@lsi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation.Salyzyn, Mark
Adding Adaptec 51245 (16 port), 51645 (20 port) and 52445 (28 port) Universal Serial RAID controllers to the aacraid documentation. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] qla2xxx: update version to 8.02.00-k1.Seokmann Ju
Following patch bump up the driver version reflecting NPIV addition to the qla2xxx. - version changed from 8.01.07-k7 to 8.02.00-k1. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] qla2xxx: add support for NPIVSeokmann Ju
Following patch adds support for NPIV (N-Port ID Virtualization) to the qla2xxx. - supported within switched-fabric topologies only. - supports up to 63 virtual ports on each physical port. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] stex: use resid for xfer len informationEd Lin
The original implementation in stex_ys_commands() is inappropriate. For xfer len information, we should use resid instead. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] Add Brownie 1200U3P to blacklistMatthew Wilcox
The Brownie 1200U3P has the same problem with REPORT LUNS as the 1600U3P. Add it to the blacklist. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] scsi.c: convert to use the data buffer accessorsBoaz Harrosh
- a couple of prints, they can use the accessors Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] tmscsim: Further clean-up of the driverBoaz Harrosh
- The saved sg_count was a leftover from the time the driver was doing dma mapping by himself. But now that scsi-ml is called for the mapping it is not the drivers responsibility. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: G. Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] CONFIG_SCSI_FD_8xx no longer existsGeert Uytterhoeven
CONFIG_SCSI_FD_8xx no longer exists. Apparently it was renamed to CONFIG_SCSI_SEAGATE, but the Makefile was not correctly updated. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] sr: fix error handling in module_initAkinobu Mita
Sweep registered blkdev when scsi_register_driver has failed. Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] lpfc: Fix NPIV compile problemJames Bottomley
drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_create_port': drivers/scsi/lpfc/lpfc_init.c:1573: error: 'struct kobject' has no member named 'dentry' Just remove the if check on this ... lpfc shouldn't be poking around in kobject structures. drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_pci_probe_one': drivers/scsi/lpfc/lpfc_init.c:1723: warning: unused variable 'retval' And remove the unused variable. Cc: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] lpfc: fix NPIV mapping problemsFUJITA Tomonori
This patch uses dma_map_sg with phba->pcidev->dev instead of scsi_dma_map. scsi_dma_map doesn't work for NPIV since fc_vport->dev isn't fully initialized. check_addr() in arch/x86_64/kernel/pci-nommu.c leads to the crash since dev->dma_mask is NULL. For more details: http://marc.info/?l=linux-scsi&m=118312448030633&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] lpfc: add missed data buffer accessorBoaz Harrosh
This is an addendum to: commit a0b4f78f9a4c869e9b29f254054ad7441cb40bbf Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> [SCSI] lpfc: convert to use the data buffer accessors One place was missed in the merge Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14[SCSI] Remove unused method scsi_device_cancelPriyanka Gupta
Removes an obsolete method scsi_device_cancel which isn't being used anywhere in the kernel. Signed-off-by: Priyanka Gupta <priyankag@google.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-149p: fix a race condition bug in umount which caused a segfaultEric Van Hensbergen
umounting partitions after heavy activity would sometimes trigger a segmentation violation. This fix appears to remove that problem. Fix originally provided by Latchesar Ionkov. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-07-149p: re-enable mount time debug optionEric Van Hensbergen
During reorganization, the mount time debug option was removed in favor of module-load-time parameters. However, the mount time option is still a useful for feature during debug and for user-fault isolation when the module is compiled into the kernel. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-07-149p: cache meta-data when cache=looseEric Van Hensbergen
This patch expands the impact of the loose cache mode to allow for cached metadata increasing the performance of directory listings and other metadata read operations. Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-07-14net/9p: set error to EREMOTEIO if trans->write returns zeroLatchesar Ionkov
If trans->write returns 0, p9_write_work goes through the error path, but sets the error code to zero. This patch sets the error code to EREMOTEIO if trans->write returns zero value. Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
2007-07-14net/9p: change net/9p module name to 9pnetLatchesar Ionkov
Change module name of net/9p module from 9p.ko to 9pnet.ko. fs/9p module already uses 9p.ko name. Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
2007-07-149p: Reorganization of 9p file system codeLatchesar Ionkov
This patchset moves non-filesystem interfaces of v9fs from fs/9p to net/9p. It moves the transport, packet marshalling and connection layers to net/9p leaving only the VFS related files in fs/9p. This work is being done in preparation for in-kernel 9p servers as well as alternate 9p clients (other than VFS). Signed-off-by: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-07-14[XFS] Fix lockdep annotations for xfs_lock_inodesDavid Chinner
SGI-PV: 967035 SGI-Modid: xfs-linux-melb:xfs-kern:29026a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-14[LIB]: export radix_tree_preload()David Chinner
XFS filestreams functionality uses radix trees and the preload functions. XFS can be built as a module and hence we need radix_tree_preload() exported. radix_tree_preload_end() is a static inline, so it doesn't need exporting. Signed-Off-By: Dave Chinner <dgc@sgi.com> Signed-Off-By: Tim Shimmin <tes@sgi.com>
2007-07-14[XFS] Fix XFS_IOC_FSBULKSTAT{,_SINGLE} & XFS_IOC_FSINUMBERS in compat modeMichal Marek
* 32bit struct xfs_fsop_bulkreq has different size and layout of members, no matter the alignment. Move the code out of the #else branch (why was it there in the first place?). Define _32 variants of the ioctl constants. * 32bit struct xfs_bstat is different because of time_t and on i386 because of different padding. Make xfs_bulkstat_one() accept a custom "output formatter" in the private_data argument which takes care of the xfs_bulkstat_one_compat() that takes care of the different layout in the compat case. * i386 struct xfs_inogrp has different padding. Add a similar "output formatter" mecanism to xfs_inumbers(). SGI-PV: 967354 SGI-Modid: xfs-linux-melb:xfs-kern:29102a Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 18:57:46 +0000