aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-12-02[SCTP]: sctp_stop_t1_and_abort() annotations.Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[SCTP]: sctp_make_op_error() annotations.Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[SCTP]: Annotate sctp_init_cause().Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[SCTP]: Annotate SCTP headers.Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[IPV6] net/ipv6/sit.c: make 2 functions staticAdrian Bunk
This patch makes two needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[XFRM]: Make copy_to_user_policy_type take a typeJamal Hadi Salim
Make copy_to_user_policy_type take a type instead a policy and fix its users to pass the type Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BRIDGE] netlink: Convert bridge netlink code to new netlink interfaceThomas Graf
Removes dependency on buggy rta_buf, fixes a memory corruption bug due to a unvalidated netlink attribute, and simplifies the code. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[DCCP]: Adds the tx buffer sysctlsIan McDonald
This one got lost on the way from Ian to Gerrit to me, fix it. Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[DCCP] CCID3: Remove non-referenced variableIan McDonald
This removes a non-referenced variable. Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[DCCP]: Update DocumentationIan McDonald
This patch just updates DCCP documentation a bit. Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[DCCP]: Make dccp_probe more portableIan McDonald
This makes the code of the dccp_probe module more portable. Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[CCID 3]: Add annotations for socket structuresGerrit Renker
This adds documentation to the CCID 3 rx/tx socket fields, plus some minor re-formatting. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[DCCP]: Simplified conditions due to use of enum:8 statesGerrit Renker
This reaps the benefit of the earlier patch, which changed the type of CCID 3 states to use enums, in that many conditions are now simplified and the number of possible (unexpected) values is greatly reduced. In a few instances, this also allowed to simplify pre-conditions; where care has been taken to retain logical equivalence. [DCCP]: Introduce a consistent BUG/WARN message scheme This refines the existing set of DCCP messages so that * BUG(), BUG_ON(), WARN_ON() have meaningful DCCP-specific counterparts * DCCP_CRIT (for severe warnings) is not rate-limited * DCCP_WARN() is introduced as rate-limited wrapper Using these allows a faster and cleaner transition to their original counterparts once the code has matured into a full DCCP implementation. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[DCCP]: Set TX Queue Length Bounds via SysctlIan McDonald
Previously the transmit queue was unbounded. This patch: * puts a limit on transmit queue length and sends back EAGAIN if the buffer is full * sets the TX queue length to a sensible default * implements tx buffer sysctls for DCCP Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[DCCP]: Add CCID3 debug support to KconfigGerrit Renker
This adds a CCID3 debug option to the configuration menu which is missing in Kconfig, but already used by the code. CCID 2 already provides such an entry. To enable debugging, set CONFIG_IP_DCCP_CCID3_DEBUG=y NOTE: The use of ccid3_{t,r}x_state_name is safe, since now only enum values can appear. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[DCCP]: enable debug messages also for static buildsGerrit Renker
This patch * makes debugging (when configured) work both for static / module build * provides generic debugging macros for use in other DCCP / CCID modules * adds missing information about debug parameters to Kconfig * performs some code tidy-up Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[BNX2]: Update version and rel date.Michael Chan
Update version to 1.5.1. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Add 5709 PCI ID.Michael Chan
Add PCI ID and detection for 5709 copper and SerDes chips. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Download 5709 firmware.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: New firmware to support 5709 (part 4).Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: New firmware to support 5709 (part 3).Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: New firmware to support 5709 (part 2).Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: New firmware to support 5709 (part 1).Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Add 5709 reset and runtime code.Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Add 5709 init code.Michael Chan
Add basic support to initialize the 5709 chip. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Add new 5709 registers (part 2).Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Add new 5709 registers (part 1).Michael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Re-organize firmware structures.Michael Chan
Re-organize the firmware handling code and declarations a bit to make the code more compact. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Remove udelay() in copper PHY code.Michael Chan
Change a long udelay() in bnx2_setup_copper_phy() to msleep(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Add 5708S parallel detection.Michael Chan
Add code to parallel detect 1Gbps and 2.5Gbps link speeds. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Add bnx2_5706_serdes_timer().Michael Chan
Separate the 5706S SerDes handling code in bnx2_timer() and put it in a new function. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Improve SerDes handling.Michael Chan
1. Add support for 2.5Gbps forced speed setting. 2. Remove a long udelay() loop and change to msleep(). 3. Other misc. SerDes fixes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[BNX2]: Fix Xen problem.Michael Chan
This fixes the problem of not receiving packets in the Xen bridging environment. The Xen script sets the device's MAC address to FE:FF:FF:FF:FF:FF and puts the device in promiscuous mode. The firmware had problem receiving all packets in this configuration. New firmware and setting the PROM_VLAN bit when in promiscuous mode will fix this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02Compile fix for "peer secid consolidation for external network labeling"James Morris
Use a forward declaration instead of dragging in skbuff.h and related junk. Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: honor the audit_enabled flagPaul Moore
The audit_enabled flag is used to signal when syscall auditing is to be performed. While NetLabel uses a Netlink interface instead of syscalls, it is reasonable to consider the NetLabel Netlink interface as a form of syscall so pay attention to the audit_enabled flag when generating audit messages in NetLabel. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02SELinux: peer secid consolidation for external network labelingPaul Moore
Now that labeled IPsec makes use of the peer_sid field in the sk_security_struct we can remove a lot of the special cases between labeled IPsec and NetLabel. In addition, create a new function, security_skb_extlbl_sid(), which we can use in several places to get the security context of the packet's external label which allows us to further simplify the code in a few places. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: SELinux cleanupsPaul Moore
This patch does a lot of cleanup in the SELinux NetLabel support code. A summary of the changes include: * Use RCU locking for the NetLabel state variable in the skk_security_struct instead of using the inode_security_struct mutex. * Remove unnecessary parameters in selinux_netlbl_socket_post_create(). * Rename selinux_netlbl_sk_clone_security() to selinux_netlbl_sk_security_clone() to better fit the other NetLabel sk_security functions. * Improvements to selinux_netlbl_inode_permission() to help reduce the cost of the common case. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: use cipso_v4_doi_search() for local CIPSOv4 functionsPaul Moore
The cipso_v4_doi_search() function behaves the same as cipso_v4_doi_getdef() but is a local, static function so use it whenever possibile in the CIPSOv4 code base. Signed-of-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: use the correct CIPSOv4 MLS label limitsPaul Moore
The CIPSOv4 engine currently has MLS label limits which are slightly larger than what the draft allows. This is not a major problem due to the current implementation but we should fix this so it doesn't bite us later. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: return the correct error for translated CIPSOv4 tagsPaul Moore
The CIPSOv4 translated tag #1 mapping does not always return the correct error code if the desired mapping does not exist; instead of returning -EPERM it returns -ENOSPC indicating that the buffer is not large enough to hold the translated value. This was caused by failing to check a specific error condition. This patch fixes this so that unknown mappings return -EPERM which is consistent with the rest of the related CIPSOv4 code. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: fixup the handling of CIPSOv4 tags to allow for multiple tag typesPaul Moore
While the original CIPSOv4 code had provisions for multiple tag types the implementation was not as great as it could be, pushing a lot of non-tag specific processing into the tag specific code blocks. This patch fixes that issue making it easier to support multiple tag types in the future. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: add tag verification when adding new CIPSOv4 DOI definitionsPaul Moore
Currently the CIPSOv4 engine does not do any sort of checking when a new DOI definition is added. The tags are still verified but only as a side effect of normal NetLabel operation (packet processing, socket labeling, etc.) which would cause application errors due to the faulty configuration. This patch adds tag checking when new DOI definition are added allowing us to catch these configuration problems when they happen. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: check for a CIPSOv4 option before we do call into the CIPSOv4 layerPaul Moore
Right now the NetLabel code always jumps into the CIPSOv4 layer to determine if a CIPSO IP option is present. However, we can do this check directly in the NetLabel code by making use of the CIPSO_V4_OPTEXIST() macro which should save us a function call in the common case of not having a CIPSOv4 option present. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: make netlbl_lsm_secattr struct easier/quicker to understandPaul Moore
The existing netlbl_lsm_secattr struct required the LSM to check all of the fields to determine if any security attributes were present resulting in a lot of work in the common case of no attributes. This patch adds a 'flags' field which is used to indicate which attributes are present in the structure; this should allow the LSM to do a quick comparison to determine if the structure holds any security attributes. Example: if (netlbl_lsm_secattr->flags) /* security attributes present */ else /* NO security attributes present */ Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: change netlbl_secattr_init() to return voidPaul Moore
The netlbl_secattr_init() function would always return 0 making it pointless to have a return value. This patch changes the function to return void. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: convert the unlabeled accept flag to use RCUPaul Moore
Currently the NetLabel unlabeled packet accept flag is an atomic type and it is checked for every non-NetLabel packet which comes into the system but rarely ever changed. This patch changes this flag to a normal integer and protects it with RCU locking. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02NetLabel: use gfp_t instead of int where it makes sensePaul Moore
There were a few places in the NetLabel code where the int type was being used instead of the gfp_t type, this patch corrects this mistake. Signed-off-by: Paul Moore <paul.moore@hp.com> Signed-off-by: James Morris <jmorris@namei.org>
2006-12-02[TCP]: Tidy up skb_entailArnaldo Carvalho de Melo
Heck, it even saves us some few bytes: [acme@newtoy net-2.6.20]$ codiff -f /tmp/tcp.o.before ../OUTPUT/qemu/net-2.6.20/net/ipv4/tcp.o /pub/scm/linux/kernel/git/acme/net-2.6.20/net/ipv4/tcp.c: tcp_sendpage | -7 tcp_sendmsg | -5 2 functions changed, 12 bytes removed [acme@newtoy net-2.6.20]$ Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[NETROM]: Use kmemdupArnaldo Carvalho de Melo
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-02[AX25]: Use kmemdupArnaldo Carvalho de Melo
Code diff stats: [acme@newtoy net-2.6.20]$ codiff /tmp/ax25.ko.before /tmp/ax25.ko.after /pub/scm/linux/kernel/git/acme/net-2.6.20/net/ax25/ax25_out.c: ax25_send_frame | -8 1 function changed, 8 bytes removed /pub/scm/linux/kernel/git/acme/net-2.6.20/net/ax25/ax25_route.c: ax25_rt_autobind | -15 1 function changed, 15 bytes removed /pub/scm/linux/kernel/git/acme/net-2.6.20/net/ax25/af_ax25.c: ax25_make_new | -33 1 function changed, 33 bytes removed /pub/scm/linux/kernel/git/acme/net-2.6.20/net/ax25/sysctl_net_ax25.c: ax25_register_sysctl | -21 1 function changed, 21 bytes removed /tmp/ax25.ko.after: 4 functions changed, 77 bytes removed [acme@newtoy net-2.6.20]$ Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 03:12:07 +0000