aboutsummaryrefslogtreecommitdiff
path: root/Documentation/powerpc
AgeCommit message (Collapse)Author
2008-08-04powerpc: Move include files to arch/powerpc/include/asmStephen Rothwell
from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where <asm-powepc/...> was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-30Merge commit 'kumar/kumar-next'Benjamin Herrenschmidt
2008-07-28Documentation: remove old sbc8260 board specific informationPaul Gortmaker
This file contains 8 yr. old board specific information that was for the now gone ppc implementation, and it pre-dates widespread u-boot support. Any of the technical details of the board memory map would be more appropriately captured in a dts if I revive it as powerpc anyway. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-28cpm_uart: Modem control lines supportLaurent Pinchart
This patch replaces the get_mctrl/set_mctrl stubs with modem control line read/write access through the GPIO lib. Available modem control lines are described in the device tree using GPIO bindings. The driver expect a GPIO pin for each of the CTS, RTS, DCD, DSR, DTR and RI signals. Unused control lines can be left out. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-26Documentation cleanup: trivial misspelling, punctuation, and grammar ↵Matt LaPlante
corrections. Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Merge commit 'gcl/gcl-next'Benjamin Herrenschmidt
2008-07-22of-bindings: Add binding documentation for SPI busses and devicesGrant Likely
Add documentation about how to describe SPI busses in the device tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
2008-07-22Merge commit 'origin/master'Benjamin Herrenschmidt
Manually fixed up: drivers/net/fs_enet/fs_enet-main.c
2008-07-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/powerpc/booting-without-of.txt drivers/atm/Makefile drivers/net/fs_enet/fs_enet-main.c drivers/pci/pci-acpi.c net/8021q/vlan.c net/iucv/iucv.c
2008-07-16Add fsl,magic-packet to, and clean up, the gianfar binding.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: Add documentation for CPM GPIO banksJochen Friedrich
Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindingsAnton Vorontsov
This patch adds few bindings for the new drivers to be submitted through the appropriate maintainers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: Update example SOC node in booting-without-of.txt.Scott Wood
Convert to DTS version 1, eliminate some obsolete practices, and correct some errors (compared to the actual 8540 device tree). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-16powerpc: Document Freescale power management nodes, and the sleep property.Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-15Merge commit 'jwb/jwb-next'Benjamin Herrenschmidt
2008-07-14powerpc/fsl: update crypto node definition and device tree instancesKim Phillips
delete obsolete device-type property, delete model property (use compatible property instead), prepend "fsl," to Freescale specific properties. Add nodes to device trees that are missing them, and fix broken property values in other trees. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/fsl: Refactor device bindingsKumar Gala
Moved Freescale SoC related bindings out of booting-without-of.txt and into their own files. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14powerpc/CPM: Add i2c pins to dts and board setupJochen Friedrich
Initialize I2C pins on boards with CPM1/CPM2 controllers and document the i2c bus in booting-without-of. The boards don't have any I2C chips connected to the I2C bus, so unless some external chips are connected to the boards, this code is just an example of setting everything else up. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-04powerpc/bootwrapper: Add documentation of boot wrapper targetsGrant Likely
There have been many questions on and off the mailing list about how exactly the bootwrapper is used for embedded targets. Add some documentation and help text to try and clarify the system. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-06-10powerpc/QE: implement support for the GPIO LIB APIAnton Vorontsov
This is needed to access QE GPIOs via Linux GPIO API. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-By: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-10powerpc/sysdev: implement FSL GTM supportAnton Vorontsov
GTM stands for General-purpose Timers Module and able to generate timer{1,2,3,4} interrupts. These timers are used by the drivers that need time precise interrupts (like for USB transactions scheduling for the Freescale USB Host controller as found in some QE and CPM chips), or these timers could be used as wakeup events from the CPU deep-sleep mode. Things unimplemented: 1. Cascaded (32 bit) timers (1-2, 3-4). This is straightforward to implement when needed, two timers should be marked as "requested" and configured as appropriate. 2. Super-cascaded (64 bit) timers (1-2-3-4). This is also straightforward to implement when needed, all timers should be marked as "requested" and configured as appropriate. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-02[POWERPC] Cleanup mpic nodes in .dtsKumar Gala
Removed clock-frequency, big-endian, and built-in props as they aren't specified anywhere. Also added compatible = "chrp,open-pic" in the places it was missing. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-06-02[POWERPC] Update booting-without-of for Freescale PCIe MSIJason Jin
Binding document adding for Freescale PCIe MSI support. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-05-30net: OpenFirmware GPIO based MDIO bitbang driverLaurent Pinchart
This patch adds an MDIO bitbang driver that uses the GPIO library and its OF bindings to access the bus I/Os. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-01[POWERPC] mpc5200: Allow for fixed speed MII configurationsGrant Likely
Various improvements for configuring the MPC5200 MII link from the device tree: * Look for 'current-speed' property for fixed speed MII links * Look for 'fsl,7-wire-mode' property for boards using the 7 wire mode * move definition of private data structure out of the header file Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2008-04-29[POWERPC] mpc5200: add gpiolib support for mpc5200s.hauer@pengutronix.de
This patch adds gpiolib support for mpc5200 SOCs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-04-28fbdev: powerpc: driver for Freescale 8610 and 5121 DIUYork Sun
The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-27KVM: ppc: PowerPC 440 KVM implementationHollis Blanchard
This functionality is definitely experimental, but is capable of running unmodified PowerPC 440 Linux kernels as guests on a PowerPC 440 host. (Only tested with 440EP "Bamboo" guests so far, but with appropriate userspace support other SoC/board combinations should work.) See Documentation/powerpc/kvm_440.txt for technical details. [stephen: build fix] Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-24[POWERPC] Xilinx: of_serial support for Xilinx uart 16550.John Linn
The Xilinx 16550 uart core is not a standard 16550 because it uses word-based addressing rather than byte-based addressing. With additional properties it is compatible with the open firmware 'ns16550' compatible binding. This code updates the of_serial driver to handle the reg-offset and reg-shift properties to enable this core to be used. Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-04-17[POWERPC] QE: UCC nodes cleanupAnton Vorontsov
- get rid of `model = "UCC"' in the ucc nodes It isn't used anywhere, so remove it. If we'll ever need something like this, we'll use compatible property instead. - replace last occurrences of device-id with cell-index. Drivers are modified for backward compatibility's sake. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-17[POWERPC] Implement support for the GPIO LIB APIAnton Vorontsov
This implements support for the GPIO LIB API. Two calls are still unimplemented though: irq_to_gpio and gpio_to_irq. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-15[POWERPC] Document the mv64x60 device tree bindingsDale Farnsworth
Add the device tree bindings for the Marvell mv64x60 series of system controller chips in booting-without-of.text. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26[POWERPC] Start removing linux,network-index in favour of aliasesDavid Gibson
This patch alters the bootwrapper for a number of machines (roubhly all 4xx based cuboot or treeboot platforms) to use aliases instead of the linux,network-index hack to work out which MAC address to attach to which ethernet device node. The now obsolete linux,network-index properties are removed from the corresponding device trees. This won't break backwards compatiblity, because in cases where this fixup code is relevant, the device tree is part of the kernel image. The references to linux,network-index are removed from booting-without-of.txt. Not only is it now deprecated, but as a hack applicable only when the device tree blob and fixup code were in the same image, this property never belonged in booting-without-of.txt which describes the interface between the kernel and firmware or bootloaders which produce a device tree. By the time the device tree reaches the kernel, all the MAC addresses must be fully filled in. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-03-26[POWERPC] pseries: phyp dump: DocumentationManish Ahuja
Basic documentation for hypervisor-assisted dump. Signed-off-by: Linas Vepstas <linasvepstas@gmail.com> Signed-off-by: Manish Ahuja <mahuja@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-06Merge branch 'virtex-for-2.6.25' of ↵Josh Boyer
git://git.secretlab.ca/git/linux-2.6-virtex into for-2.6.25
2008-02-06[POWERPC] 4xx: Add USB ehci-ppc-of dts bindings.Valentine Barshak
Adds EHCI OF bindings to documentation. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-02-06[POWERPC] Xilinx: hwicap: update booting-without-of.txtStephen Neuendorffer
The ICAP device in Xilinx FPGAs differs slightly between different FPGAs. The driver needs an additional attribute in the device tree to distinguish this. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-28[POWERPC] fsl_spi: stop using device_type = "spi"Anton Vorontsov
Also: - rename "fsl_spi" to "fsl,spi"; - add and use cell-index property, if found; - split probing code out of fsl_spi_init, thus we can call it for legacy device_type probing and new "compatible" probing. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] QE: get rid of most device_types and modelAnton Vorontsov
Now we're searching for "fsl,qe", "fsl,qe-muram", "fsl,qe-muram-data" and "fsl,qe-ic". Unfortunately it's still impossible to remove device_type = "qe" from the existing device trees because older u-boots are looking for it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] Add docs for Freescale PowerQUICC SATA device tree nodesLi Yang
Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] Add docs for Freescale DMA & DMA channel device tree nodesZhang Wei
Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] Update MPC8610 HPCD to support audio driversTimur Tabi
Update the MPC8610 HPCD files to support the audio driver. Update booting-without-of.txt with information on the SSI device. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] QE: Add support for Freescale QUICCEngine UARTTimur Tabi
Add support for UART serial ports using a Freescale QUICCEngine. Update booting-without-of.txt to define new properties for a QE UART node. Update the MPC8323E-MDS device tree to add UCC5 as a UART. Update the QE library to support slow UCC devices and modules. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] QE: Add ability to upload QE firmwareTimur Tabi
Define the layout of a binary blob that contains a QE firmware and instructions on how to upload it. Add function qe_upload_firmware() to parse the blob and perform the actual upload. Fully define 'struct rsp' in immap_qe.h to include the actual RISC Special Registers. Added description of a new QE firmware node to booting-without-of.txt. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] fsl_soc: add support to gianfar for fixed-link propertyVitaly Bordug
fixed-link says: register new "Fixed/emulated PHY", i.e. PHY that not connected to the real MDIO bus. Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-23[POWERPC] 83xx: USB device tree cleanupsLi Yang
Remove device_type = "usb" for 83xx SoC USB controller Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-17[POWERPC] #address-cells & #size-cells properties are not inheritedMark A. Greer
Fix error in booting-without-of.txt that indicates that a node can inherit its #address-cells and #size-cells definitions from its parent's parent. This is not correct. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] booting-without-of: localbus should not include board nameAnton Vorontsov
Fix documentation once and for ever, because I'm pretty tired of repeating that I am merely following it. ;-) http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048096.html http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046977.html http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046979.html http://ozlabs.org/pipermail/linuxppc-dev/2007-October/044411.html http://ozlabs.org/pipermail/linuxppc-dev/2007-October/044413.html Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-09[POWERPC] Xilinx: Update booting-without-of.Stephen Neuendorffer
This now better describes what the UBoot device tree generator actually does. In particular: 1) Nodes have a label derived from the device name, and a node name derived from a generic version of the device type, e.g. 'ethernet', 'serial', etc. 2) Usage of compound nodes (representing more than one device in the same IP) which actually works. This requires having a valid compatible node, and all the other things that a bus normally has. I've chosen 'xlnx,compound' as the bus name to describe these compound nodes. In addition, I've clarified some of the language relating to how mhs nodes should be represent in the device tree. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2007-12-13[POWERPC] qe: add function qe_clock_source()Timur Tabi
Add function qe_clock_source() which takes a string containing the name of a QE clock source (as is typically found in device trees) and returns the matching enum qe_clock value. Update booting-without-of.txt to indicate that the UCC properties rx-clock and tx-clock are deprecated and replaced with rx-clock-name and tx-clock-name, which use strings instead of numbers to indicate QE clock sources. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-23 23:38:25 +0000