aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/Makefile
AgeCommit message (Collapse)Author
2007-07-22[ARM] 4461/1: MXC platform and i.MX31ADS core supportQuinn Jensen
This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11[ARM] 4331/3: Support for Micrel/Kendin KS8695 processorAndrew Victor
Add core support for the Kendin/Micrel KS8695 processor family. It is an ARM922-T based SoC with integrated USART, 4-port Ethernet Switch, WAN Ethernet port, and optional PCI Host bridge, etc. http://www.micrel.com/page.do?page=product-info/sys_on_chip.jsp This patch is based on earlier patches from Lennert Buytenhek, Ben Dooks and Greg Ungerer posted to the arm-linux-kernel mailing list in March 2006; and Micrel's 2.6.9 port. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11[ARM] 4303/3: base kernel support for TI DaVinciKevin Hilman
Add base kernel support for the TI DaVinci platform. This patch only includes interrupts, timers, CPU identification, serial support and basic power and sleep controller init. More drivers to come. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-09[ARM] armv7: add Makefile and Kconfig entriesCatalin Marinas
This patch adds the necessary lines to the Makefile and Kconfig files for enabling the compilation of the ARMv7 CPU support. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-20[PATCH] ARM: fix mach-at91 build breakageDavid Brownell
The rename of the AT91 subtree from mach-at91rm9200 to mach-at91 (to accomodate at91sam926x processors) was incomplete. It needs this patch to be able to build again. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-18Merge NetSilicon NS93xx treeRussell King
Fixed conflicts: arch/arm/Makefile arch/arm/mm/Kconfig Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17Merge AT91, EP93xx, General devel, PXA, S3C, V6+ and Xscale treesRussell King
2007-02-17[ARM] 4210/1: base for new machine type "NetSilicon NS9360"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16[ARM] 4198/2: S3C2443: arch/arm/mach-s3c2443 and related supportBen Dooks
Add arch/arm/mach-s3c2443 for support of the Samsung S3C2443 SoC This patch adds the core CPU support, clock framework, times and initial IRQ support, as well as adding the directory into the build tree. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-11[ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu componentsBen Dooks
The following patch and script moves the arch/arm/mach-s3c2410 directory into arch/arm/plat-s3c24xx for the generic core code and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files Include directory include/asm-arm/plat-s3c24xx is added for the core include files. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08[ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directoriesAndrew Victor
Now that Linux includes support for the Atmel AT91SAM9260 and AT91SAM9261 processors in addition to the original Atmel AT91RM9200 (with support for more AT91 processors pending), the "mach-at91rm9200" and "arch-at91rm9200" directories should be renamed to indicate their more generic nature. The following git commands should be run BEFORE applying this patch: git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91 git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91 Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] Merge individual ARM sub-treesRussell King
Merge: Atmel AT91RM9200 and AT91SAM9260 changes General ARM developments Disconfiguous memory cleanups 64-bit/32-bit division and sched_clock extension patches EP93xx support changes IOP support changes Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] 3995/1: iop13xx: add iop13xx supportDan Williams
The iop348 processor integrates an Xscale (XSC3 512KB L2 Cache) core with a Serial Attached SCSI (SAS) controller, multi-ported DDR2 memory controller, 3 Application Direct Memory Access (DMA) controllers, a 133Mhz PCI-X interface, a x8 PCI-Express interface, and other peripherals to form a system-on-a-chip RAID subsystem engine. The iop342 processor replaces the SAS controller with a second Xscale core for dual core embedded applications. The iop341 processor is the single core version of iop342. This patch supports the two Intel customer reference platforms iq81340mc for external storage and iq81340sc for direct attach (HBA) development. The developer's manual is available here: ftp://download.intel.com/design/iio/docs/31503701.pdf Changelog: * removed virtual addresses from resource definitions * cleaned up some unnecessary #include's Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07[ARM] 3982/2: Explicitly select 32-bit ARM ISA (-marm)George G. Davis
Do not assume that the ARM GCC toolchain defaults to building for the 32-bit ARM ISA (-marm) case. Instead, explicitly select -marm in CFLAGS since the toolchain default can be for the 16-bit Thumb ISA (-mthumb) in some odd/rare cases. Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-29[ARM] Add KBUILD_IMAGE target supportRussell King
Add support for KBUILD_IMAGE on ARM. This takes the usual target specifiers (zImage/Image/etc) in the same way that powerpc does (iow, without the arch/arm/boot prefix). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] nommu: add ARM946E-S core supportHyok S. Choi
This patch adds ARM946E-S core support which has typically 8KB I&D cache. It has a MPU and supports ARMv5TE instruction set. Because the ARM946E-S core can be synthesizable with various cache size, CONFIG_CPU_DCACHE_SIZE is defined for vendor specific configurations. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] nommu: add ARM940T core supportHyok S. Choi
This patch adds ARM940T core support which has 4KB D-cache, 4KB I-cache and a MPU. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] nommu: add ARM9TDMI core supportHyok S. Choi
This patch adds ARM9TDMI core support which has no cache and no CP15 register(no memory control unit). Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] nommu: add ARM740T core supportHyok S. Choi
This patch adds ARM740T core support which has a MPU and 4KB or 8KB cache. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] nommu: add ARM7TDMI core supportHyok S. Choi
This patch adds ARM7TDMI core support which has no cache and no CP15 register(no memory control unit). Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3818/1: iop3xx: introduce arch/arm/plat-iop for shared iop32x/iop33x codeLennert Buytenhek
Introduce the arch/arm/plat-iop directory, for code shared between the iop32x and iop33x, and move the common memory map setup bits there. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33xLennert Buytenhek
Split the iop3xx mach type into iop32x and iop33x -- split the config symbols, and move the code in the mach-iop3xx directory to the mach-iop32x and mach-iop33x directories. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-28[ARM] 3761/1: fix armv4t breakage after adding thumb interworking to ↵Lennert Buytenhek
userspace helpers Patch from Lennert Buytenhek On armv4t systems, we have always compiled the kernel with -march=armv4 instead of -march=armv4t, which means that any use of bx will bomb out. Commit ba9b5d76372dc290b6ca04dad93927a22c2ac49a introduced the use of bx in the kernel, which means we need to compile with -march=armv4t on armv4t systems now. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29[ARM] 3675/2: Preparing for AT91SAM926 supportAndrew Victor
Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits) kbuild: trivial fixes in Makefile kbuild: adding symbols in Kconfig and defconfig to TAGS kbuild: replace abort() with exit(1) kbuild: support for %.symtypes files kbuild: fix silentoldconfig recursion kbuild: add option for stripping modules while installing them kbuild: kill some false positives from modpost kbuild: export-symbol usage report generator kbuild: fix make -rR breakage kbuild: append -dirty for updated but uncommited changes kbuild: append git revision for all untagged commits kbuild: fix module.symvers parsing in modpost kbuild: ignore make's built-in rules & variables kbuild: bugfix with initramfs kbuild: modpost build fix kbuild: check license compatibility when building modules kbuild: export-type enhancement to modpost.c kbuild: add dependency on kernel.release to the package targets kbuild: `make kernelrelease' speedup kconfig: KCONFIG_OVERWRITECONFIG ...
2006-06-19[ARM] 3567/2: arm: base support for Hilscher netXSascha Hauer
Patch from Sascha Hauer This patch adds the base support for Hilscher's netX network processors. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip supportVitaly Wool
Patch from Vitaly Wool This patch adds basic chip support for PNX4008 ARM platform. It's basically the same as the previous one, but with the rmk's comments taken into account. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-09kconfig: integrate split config into silentoldconfigRoman Zippel
Now that kconfig can load multiple configurations, it becomes simple to integrate the split config step, by simply comparing the new .config file with the old auto.conf (and then saving the new auto.conf). A nice side effect is that this saves a bit of disk space and cache, as no data needs to be read from or saved into the splitted config files anymore (e.g. include/config is now 648KB instead of 5.2MB). Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-04-25[ARM] 3484/1: Correct AEABI CFLAGS for correct enum handlingRichard Purdie
Patch from Richard Purdie The AAPCS says that enums can be variably sized depending on the range of valid values. This is not the accepted behaviour under linux so for compatibility gcc has an aapcs-linux target, the main difference being that enums are always of type int. Change the ARM Makefile to use this target. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28Merge nommu treeRussell King
2006-03-28[ARM] 3388/1: ixp23xx: add core ixp23xx supportLennert Buytenhek
Patch from Lennert Buytenhek This patch adds support for the Intel ixp23xx series of CPUs. The ixp23xx is an XSC3 based CPU with 512K of L2 cache, a 64bit 66MHz PCI interface, two DDR RAM interfaces, QDR RAM interfaces, two gigabit MACs, two 10/100 MACs, expansion bus, four microengines, a Media and Switch Fabric unit almost identical to the one on the ixp2400, two xscale (8250ish) UARTs and a bunch of other stuff. This patch adds the core ixp23xx support code, and support for the ADI Engineering Roadrunner, Intel IXDP2351, and IP Fabrics Double Espresso platforms. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28[ARM] 3377/2: add support for intel xsc3 coreLennert Buytenhek
Patch from Lennert Buytenhek This patch adds support for the new XScale v3 core. This is an ARMv5 ISA core with the following additions: - L2 cache - I/O coherency support (on select chipsets) - Low-Locality Reference cache attributes (replaces mini-cache) - Supersections (v6 compatible) - 36-bit addressing (v6 compatible) - Single instruction cache line clean/invalidate - LRU cache replacement (vs round-robin) I attempted to merge the XSC3 support into proc-xscale.S, but XSC3 cores have separate errata and have to handle things like L2, so it is simpler to keep it separate. L2 cache support is currently a build option because the L2 enable bit must be set before we enable the MMU and there is no easy way to capture command line parameters at this point. There are still optimizations that can be done such as using LLR for copypage (in theory using the exisiting mini-cache code) but those can be addressed down the road. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-27[ARM] nommu: add nommu specific Kconfig and MMUEXT variable in MakefileHyok S. Choi
This patch adds Kconfig-nommu for noMMU specific configurations and MMUEXT variable into Makefile. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-27[ARM] nommu: start-up codeHyok S. Choi
This patch adds nommu version start-up code head-nommu.S. The common part of the start-up codes is moved to head-common.S. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-25Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild: (46 commits) kbuild: remove obsoleted scripts/reference_* files kbuild: fix make help & make *pkg kconfig: fix time ordering of writes to .kconfig.d and include/linux/autoconf.h Kconfig: remove the CONFIG_CC_ALIGN_* options kbuild: add -fverbose-asm to i386 Makefile kbuild: clean-up genksyms kbuild: Lindent genksyms.c kbuild: fix genksyms build error kbuild: in makefile.txt note that Makefile is preferred name for kbuild files kbuild: replace PHONY with FORCE kbuild: Fix bug in crc symbol generating of kernel and modules kbuild: change kbuild to not rely on incorrect GNU make behavior kbuild: when warning symbols exported twice now tell user this is the problem kbuild: fix make dir/file.xx when asm symlink is missing kbuild: in the section mismatch check try harder to find symbols kbuild: fix section mismatch check for unwind on IA64 kbuild: kill false positives from section mismatch warnings for powerpc kbuild: kill trailing whitespace in modpost & friends kbuild: small update of allnoconfig description kbuild: make namespace.pl CROSS_COMPILE happy ... Trivial conflict in arch/ppc/boot/Makefile manually fixed up
2006-03-21[ARM] 3369/1: ep93xx: add core cirrus ep93xx supportLennert Buytenhek
Patch from Lennert Buytenhek This patch adds support for the Cirrus ep93xx series of CPUs. The ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs, IrDA, MaverickCrunch floating point coprocessor, between 24 and 64 GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster engine, graphics accelerator, IDE controller and a bunch of other stuff. This patch adds the core ep93xx support code, and support for the Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-06kbuild: change kbuild to not rely on incorrect GNU make behaviorPaul Smith
The kbuild system takes advantage of an incorrect behavior in GNU make. Once this behavior is fixed, all files in the kernel rebuild every time, even if nothing has changed. This patch ensures kbuild works with both the incorrect and correct behaviors of GNU make. For more details on the incorrect behavior, see: http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html Changes in this patch: - Keep all targets that are to be marked .PHONY in a variable, PHONY. - Add .PHONY: $(PHONY) to mark them properly. - Remove any $(PHONY) files from the $? list when determining whether targets are up-to-date or not. Signed-off-by: Paul Smith <psmith@gnu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-01-14[ARM] 3107/3: ARM EABI: last bits to configure itNicolas Pitre
Patch from Nicolas Pitre This adds the configuration option, and disables any FPA floating point emulators which are not EABI compatible. It also disables Acorn RISC OS/Arthur binary support when CONFIG_EABI=y since it is incompatible with an EABI kernel. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09[ARM] 3240/2: AT91RM9200 support for 2.6 (Core)SAN People
Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-08[ARM] Remove EPXA10DB machine supportRussell King
EPXA10DB seems to be uncared for: - the "PLD" code has never been merged - no one has reported that this platform has been broken since at least 2.6.10 - interest seems to have dried up around March 2003. Therefore, remove EPXA10DB support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03[ARM] Make kernel link address depend on PAGE_OFFSETRussell King
We are coding the kernel link address into the makefiles, which is invisibly dependent on PAGE_OFFSET. If PAGE_OFFSET is changed, the makefiles also need to be changed. Make adjustments such that the makefiles encode just the offset from PAGE_OFFSET for the kernel link address, and use PAGE_OFFSET in the linker scripts directly. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3145/1: OMAP 3a/5: Add support for omap24xxTony Lindgren
Patch from Tony Lindgren This patch adds support for omap24xx series of processors. The files live in arch/arm/mach-omap2, and share common files with omap15xx and omap16xx processors in arch/arm/plat-omap. Omap24xx support was originally added for 2.6.9 by TI. This code was then improved and integrated to share common code with omap15xx and omap16xx processors by various omap developers, such as Paul Mundt, Juha Yrjola, Imre Deak, Tony Lindgren, Richard Woodruff, Nishant Menon, Komal Shah et al. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-04[ARM] 3097/1: change library link orderingNicolas Pitre
Patch from Nicolas Pitre We have an optimized sha1 routine (arch/arm/lib/sha1.S) meant to override the generic one in lib/sha1.c. Unfortunately lib/lib.a is listed _before_ arch/arm/lib/lib.a in the link argument list and therefore the architecture specific lib functions are not picked up before the generic versions. This patch is a quick fix to change that ordering for ARM. Here's what the kbuild maintainer had to say about it (was also CC'd on lkml): On Wed, 2 Nov 2005, Sam Ravnborg wrote: > This looks like an obvious way to achive correct ordering. > We could change it so arch defines always took precedence but > the above is so simple that it is not worth the effort. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-03[ARM SMP] Add configuration option for ARMv6K processorsRussell King
The 'K' extension adds several new instructions to the ARMv6 ISA which are primerily useful for SMP. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-31[ARM] Add support for ARM RealView boardCatalin Marinas
Support for RealView EB. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-29[ARM] 3061/1: cleanup the XIP link address messNicolas Pitre
Patch from Nicolas Pitre Since vmlinux.lds.S is preprocessed, we can use the defines already present in asm/memory.h (allowed by patch #3060) for the XIP kernel link address instead of relying on a duplicated Makefile hardcoded value, and also get rid of its dependency on awk to handle it at the same time. While at it let's clean XIP stuff even further and make things clearer in head.S with a nice code reduction. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 2970/1: Use -mtune=arm1136j-s when building for CPU_V6 targetsGeorge G. Davis
Patch from George G. Davis When building for CPU_V6 targets, we should use -mtune=arm1136j-s rather than -mtune=strongarm but fall back to the later in case someone is using an older toolchain (although they should really upgrade instead). Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-26[PATCH] missing dependency on arm O= buildsAl Viro
arm maketools needs include/asm-arm in place in the build tree. On normal builds it's always there, of course, but on O= it's created (by generic code) too late - when we get to asm-offset.h. We used to get away with that by accident - creation of include/asm-arm/arch symlink creates include/asm-arm and it happened to go before maketools. However, we did not have such dependency, so that luck didn't last - now maketools is picked first and we are screwed. Both the symlink and maketools are prerequisites of the same target (archprepare). This fix is obvious - make the latter explicitly depend on the former and be done with that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11kbuild: rename prepare to archprepare to fix dependency chainSam Ravnborg
When introducing the generic asm-offsets.h support the dependency chain for the prepare targets was changed. All build scripts expecting include/asm/asm-offsets.h to be made when using the prepare target would broke. With the limited number of prepare targets left in arch Makefiles the trivial solution was to introduce a new arch specific target: archprepare The dependency chain looks like this now: prepare | +--> prepare0 | +--> archprepare | +--> scripts_basic +--> prepare1 | +---> prepare2 | +--> prepare3 So prepare 3 is processed before prepare2 etc. This guaantees that the asm symlink, version.h, scripts_basic are all updated before archprepare is processed. prepare0 which build the asm-offsets.h file will need the actions performed by archprepare. The head target is now named prepare, because users scripts will most likely use that target, but prepare-all has been kept for compatibility. Updated Documentation/kbuild/makefiles.txt. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-09kbuild: arm - use generic asm-offsets.h supportSam Ravnborg
Delete obsoleted stuff from arch Makefile and rename constants.h to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>