aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/configs
AgeCommit message (Collapse)Author
2008-08-09[ARM] Orion: enable CONFIG_RTC_DRV_S35390A in the defconfg for QNAP devicesMartin Michlmayr
The QNAP TS-109/TS-209 and TS-409 devices need RTC_DRV_S35390A. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-09[ARM] Orion: enable RTC_DRV_PCF8563 in the defconfig for HP mv2120Martin Michlmayr
Enable RTC_DRV_PCF8563 in the Orion defconfig since this driver is needed by the HP mv2120. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-09[ARM] Orion: enable KEYBOARD_GPIO in the defconfgMartin Michlmayr
Enable KEYBOARD_GPIO in the Orion defconfig because a number of Orion devices, such as the HP mv2120, define gpio-keys buttons. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-01Fix rename of at91_nand -> atmel_nandPieter du Preez
Structs called at91_nand_data where renamed to atmel_nand_data and configs called *MTD_NAND_AT91* where renamed to *MTD_NAND_ATMEL*. This was unfortunately not done consistently, causing NAND chips not being initialised on several ARM boards. I am aware that the author of the original change did not rename MTD_NAND_AT91_BUSWIDTH to MTD_NAND_ATMEL_BUSWIDTH, for example. All *MTD_NAND_AT91* where renamed to *MTD_NAND_ATMEL* in order to keep naming consistency. This patch was only tested on a MACH_SAM9_L9260, as this is the only ARM board I have to my disposal. Before this patch: $ git-ls-files |xargs grep atmel_nand |wc -l 105 $ git-ls-files |xargs grep at91_nand |wc -l 4 $ git-ls-files |xargs grep MTD_NAND_ATMEL |wc -l 8 $ git-ls-files |xargs grep MTD_NAND_AT91 |wc -l 47 After this patch: $ git-ls-files |xargs grep atmel_nand |wc -l 109 $ git-ls-files |xargs grep at91_nand |wc -l 0 $ git-ls-files |xargs grep MTD_NAND_ATMEL |wc -l 55 $ git-ls-files |xargs grep MTD_NAND_AT91 |wc -l 0 Signed-off-by: Pieter du Preez <pdupreez@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-26[ARM] update defconfig for eseries.Ian Molton
Signed-off-by: Ian Molton <spyro@f2s.com>
2008-07-13Merge branch 'pxa' into develRussell King
Conflicts: arch/arm/configs/em_x270_defconfig arch/arm/configs/xm_x270_defconfig
2008-07-10Merge branch 'imx' into develRussell King
Conflicts: arch/arm/mm/Kconfig
2008-07-10Merge branches 'at91', 'dyntick', 'ep93xx', 'iop', 'ixp', 'misc', 'orion', ↵Russell King
'omap-reviewed', 'rpc', 'rtc' and 's3c' into devel
2008-07-10[ARM] 5169/1: Defconfig for the EZX machinesStefan Schmidt
This defconfig enables all currently available features. It also builds one zImage which runs on all machines. Signed-off-by: Antonio Ospite <ao2@openezx.org> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10[ARM] 5133/2: at91sam9g20 defconfig filesedji gaouaou
at91sam9g20 defconfig file Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-07[ARM] Orion: LED support for HP mv2120Martin Michlmayr
The HP mv2120 has several LEDs that are controlled through gpio. Export the health LED, the red SATA LEDs as well as two gpios that control the brightness of _all_ LEDs to userland. The Ethernet and power LEDs can't be controlled through gpio and the blue SATA LEDs are handled via the SATA driver. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-07-07[ARM] s3c2410_defconfig: update for current buildBen Dooks
Update the s3c2410_defconfig for the current set of added patches. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-05i.MX27: Adding PCM038 platform supportJuergen Beisert
This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MX27: Add ADS platform supportJuergen Beisert
This patch adds basic support for the Freescale MX27ADS reference board. Currently only a serial console can be used. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05MX3: Add basic support for LogicPD i.MX31 LiteKitDaniel Mack
This patch adds basic support for i.MX31 LiteKit by LogicPD. With printascii() in kernel/printk.c, it boots right into the rootfs-panic. Note: This is a modified version of Daniel's patch to fit into this patch stack. > On 09.06.2008, at 17:26, Russell King - ARM Linux wrote: > > > I would much prefer it if board specific includes were included by the > > code which needs them rather than in asm/arch/hardware.h.  With the > > device model, drivers shouldn't need to include any board specific > > includes - only the board specific C file should need it. > > The new version of this patch (#5102) has been uploaded to the patch > tracker this morning. Signed-off-by: Daniel Mack <daniel@caiaq.de> -- arch/arm/configs/mx31litekit_defconfig | 1100 ++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 7 arch/arm/mach-mx3/Makefile | 1 arch/arm/mach-mx3/mx31lite.c | 96 ++ include/asm-arm/arch-mxc/board-mx31lite.h | 38 + include/asm-arm/arch-mxc/debug-macro.S | 3 6 files changed, 1245 insertions(+)
2008-07-05MX31: add basic pcm037 board supportSascha Hauer
This patch adds basic board support for phytecs pmc037 board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05i.MX3: Add a basic default config for the imx31ads (reference only)Juergen Beisert
Currently there is a mx31ads BSP file in the kernel, but no default config file. This patch adds a basic default config for the imx31ads but it is for test purposes only to ensure the i.MX2 patch stack doesn't break the i.MX3. Note: For reference only. This configuration is untested as I have no access to an mx31ads. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-03[ARM] S3C24XX: Split serial driver into core and per-cpu driversBen Dooks
The S3C2410 serial driver in drivers/serial/s3c2410.c has been growing bigger with the addition of more variants of this hardware with the growing Samsung SoCs range. As such, it would be easier to split this code up into a core and per-cpu drivers to make driver addition easier, and the core smaller. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: enable USB subset of driversBen Dooks
Enable a subset of USB drivers which are useful for using on these devices. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: add SCSI supportBen Dooks
Enable SCSI support, mainly to help with adding USB storage support later and for the imminent changes for libata. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: update networking optionsBen Dooks
Add the following to the networking confgiuration: 1) Packet socket support (useful for userland dhcp) 2) Add bluetooth and USB bluetooth drivers as modules 3) Add basic IPv6 support as modules. 4) Add the wireless core as modules. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: update miscellaneous optionsBen Dooks
Add some basic config filesystem, ensure errors are verbose by default. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: update filesystem optionsBen Dooks
Enable new filesystem options, such as: - JFFS2 summary nodes - Ext2/3 externed options - Standard CDROM filesystems Also add NTFS as a module. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: enable useful NLS optionsBen Dooks
Enable some useful NLS codepages to be built into the kernel, and build the rest as modules. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: update list of used driversBen Dooks
Update the drivers built, such as the SM501 and parallel port. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] S3C24XX: s3c2410_defconfig: update to rc8Ben Dooks
Update the s3c2410_defconfig to rc8 Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-06-30[ARM] Orion: enable all currently supported boards in defconfigImre Kaloz
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22[ARM] mv78xx0: add defconfigLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22[ARM] Kirkwood: add defconfigSaeed Bishara
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22[ARM] Loki: add defconfigLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22[ARM] Orion: update defconfig to 2.6.26-rc4Nicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-02[ARM] 5036/2: Combine cm_x270_defconfig and em_x270_defconfig into ↵Mike Rapoport
xm_x270_defconfig Combine cm_x270_defconfig and em_x270_defconfig to allow running the same kernel on both machines Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 4935/1: AT91CAP9: enable RTC-on-RTT in defconfig.Stelian Pop
Update the help text for RTC_DRV_AT91SAM9 to mention that the option apply to AT91CAP9 processors too, and enable it in the defconfig. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 4934/1: AT91CAP9 UDPHS driver: board and cpu integration.Stelian Pop
This is patch 2 of 2 adding support for the USB High Speed Device Port on the AT91CAP9 system on chip. The AT91CAP9 uses the same UDPHS IP as the AVR32 and the AT91SAM9RL. This patch declares the UDPHS ressources in the at91cap9 (cpu and adk board) files, wires up the atmel_usba_udc driver to them, and activates the driver in the defconfig. Signed-off-by: Stelian Pop <stelian@popies.net> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 5058/1: [AT91] Calao Systems - default configsAndrew Victor
Default config files for the three AT91-based boards available from Calao Systems: USB_A9260, USB_A9263 and QIL_A9260. Signed-off-by: Grégory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-12[ARM] dyntick: Remove obsolete and unused ARM dyntick supportRussell King
dyntick is superseded by the clocksource/clockevent infrastructure, using the NO_HZ configuration option. No one implements dyntick on ARM anymore, so it's pointless keeping it around. Remove dyntick support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-29Merge branches 'pxa' and 'orion-fixes1'Russell King
2008-04-21[ARM] 5006/1: Gumstix GPIO header fixup and defconfig fixupJaya Kumar
This patch adds the include of the GPIO header needed to make gumstix build. The defconfig is updated to 2.6.25 and disables PCMCIA since that has not yet been implemented for gumstix. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19Merge branches 'arm', 'at91', 'ep93xx', 'iop', 'ks8695', 'misc', 'mxc', ↵Russell King
'ns9x', 'orion', 'pxa', 'sa1100', 's3c' and 'sparsemem' into devel
2008-04-19[ARM] 4965/1: magician: use htc-pasic3,leds-pasic3,ds1wm,leds-gpioPhilipp Zabel
This patch enables LEDs and the 1-wire bus (connected to a DS2760 battery monitor) on the magician. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4951/1: magician: enable external power supply (pda_power) driverPhilipp Zabel
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4950/1: magician: enable MMC supportPhilipp Zabel
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4949/1: magician: enable flash VPP GPIO and build in MTD, ↵Philipp Zabel
physmap-flash and JFFS2 This enables rootfs on StrataFlash if the bootloader supplies the partition list. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4948/1: magician: use htc-egpio to drive the GPIO/IRQ expander CPLDPhilipp Zabel
needed for power management (audio, BT, charging, GSM, LCD, SD), GSM, flash and SD operation and audio routing. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4941/1: Add initial defconfig for HTC Magician PDA phonesPhilipp Zabel
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boardsJaya Kumar
This patch implements support for Gumstix-F flash, udc and mci. Fixes since the last time are: - Steve Sakoman as maintainer - cleanup for udc and mci setup Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4963/1: S3C2410 - add basic machine support for the TCT HammerDavid Anders
Add the TinCanTools Hammer board to list of supported machines in the arch/arm/mach-s3c2410 directory, as well as a default config entry. the mach-tct_hammer.c file initializes basic i/o, clocks, irqs, as well as the mtd flash layout if enabled in the kernel configuration. Signed-off-by: David Anders <danders@amltd.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4980/1: [AT91] emQbit ECB_AT91 board supportAndrew Victor
Support for the emQbit ECB_AT91 board. <http://wiki.emqbit.com/free-ecb-at91> Original patch from Nelson Castillo. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4979/1: [AT91] Olimex SAM9-L9260 board supportAndrew Victor
Support for the Olimex SAM9-L9260 board. <http://www.olimex.com/dev/sam9-L9260.html> Original patch from Ivan Vasilev. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4978/1: [AT91] KB9260 (CAM60) board supportAndrew Victor
Support for the Kwikbyte KB9260 (CAM60) board. <http://www.kwikbyte.com/KB9260.html> Original patch from Kwikbyte. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>