aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/configs
AgeCommit message (Collapse)Author
2008-04-29Merge branches 'pxa' and 'orion-fixes1'Russell King
2008-04-21[ARM] 5006/1: Gumstix GPIO header fixup and defconfig fixupJaya Kumar
This patch adds the include of the GPIO header needed to make gumstix build. The defconfig is updated to 2.6.25 and disables PCMCIA since that has not yet been implemented for gumstix. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19Merge branches 'arm', 'at91', 'ep93xx', 'iop', 'ks8695', 'misc', 'mxc', ↵Russell King
'ns9x', 'orion', 'pxa', 'sa1100', 's3c' and 'sparsemem' into devel
2008-04-19[ARM] 4965/1: magician: use htc-pasic3,leds-pasic3,ds1wm,leds-gpioPhilipp Zabel
This patch enables LEDs and the 1-wire bus (connected to a DS2760 battery monitor) on the magician. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4951/1: magician: enable external power supply (pda_power) driverPhilipp Zabel
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4950/1: magician: enable MMC supportPhilipp Zabel
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4949/1: magician: enable flash VPP GPIO and build in MTD, ↵Philipp Zabel
physmap-flash and JFFS2 This enables rootfs on StrataFlash if the bootloader supplies the partition list. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4948/1: magician: use htc-egpio to drive the GPIO/IRQ expander CPLDPhilipp Zabel
needed for power management (audio, BT, charging, GSM, LCD, SD), GSM, flash and SD operation and audio routing. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4941/1: Add initial defconfig for HTC Magician PDA phonesPhilipp Zabel
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boardsJaya Kumar
This patch implements support for Gumstix-F flash, udc and mci. Fixes since the last time are: - Steve Sakoman as maintainer - cleanup for udc and mci setup Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4963/1: S3C2410 - add basic machine support for the TCT HammerDavid Anders
Add the TinCanTools Hammer board to list of supported machines in the arch/arm/mach-s3c2410 directory, as well as a default config entry. the mach-tct_hammer.c file initializes basic i/o, clocks, irqs, as well as the mtd flash layout if enabled in the kernel configuration. Signed-off-by: David Anders <danders@amltd.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4980/1: [AT91] emQbit ECB_AT91 board supportAndrew Victor
Support for the emQbit ECB_AT91 board. <http://wiki.emqbit.com/free-ecb-at91> Original patch from Nelson Castillo. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4979/1: [AT91] Olimex SAM9-L9260 board supportAndrew Victor
Support for the Olimex SAM9-L9260 board. <http://www.olimex.com/dev/sam9-L9260.html> Original patch from Ivan Vasilev. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4978/1: [AT91] KB9260 (CAM60) board supportAndrew Victor
Support for the Kwikbyte KB9260 (CAM60) board. <http://www.kwikbyte.com/KB9260.html> Original patch from Kwikbyte. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-10[ARM] 4939/1: [CSB637] Update defconfig to use gpio-ledBill Gatliff
Updates the CSB637 platform's D1/PB2 LED to use gpio-led by default. Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-10[ARM] 4915/1: AT91: Update defconfigs (Part 2)Andrew Victor
Update the default configuration for the following AT91-based boards: Embest ATEB9200 Cogent CSB337 Cogent CSB637 Sperry-Sun KAFA Picotux200 Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-10[ARM] 4914/1: AT91: Update defconfigs (Part 1)Andrew Victor
Update the default configuration for the following AT91-based boards: Atmel AT91RM9200 DK Atmel AT91RM9200 EK Atmel AT91SAM9260 EK Atmel AT91SAM9261 EK Atmel AT91SAM9263 EK Atmel AT91SAM9RL EK Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-31ns9xxx: update defconfigUwe Kleine-König
- add all available mach types for ns9xxx even if the corresponding variables don't exist yet. - minimize such that only relevant variables are defined. For others the default value is used. Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
2008-03-28[ARM] 4825/1: adds support for YL9200 boardSteve Birtles
1. Configuration file for YL9200 2. Board file fro YL9200 Adds support for the UCdragon YL9200 board available widly in China Signed-off-by: steve birtles <arm_kernel_development@micromark.net.cn> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-27Orion: orion -> orion5x renameLennert Buytenhek
Do a global s/orion/orion5x/ of the Orion 5x-specific bits (i.e. not the plat-orion bits.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Acked-by: Saeed Bishara <saeed@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-03-06ARM: OMAP1: Compile in other 16xx boards to OSK defconfigTony Lindgren
This allows monitoring compile issues with Kautobuild for other omap1 boards until we have more board specific defconfig files. After 2.6.25, we can add a generic config_omap_generic16xx to compile in support for all 16xx boards and then remove other boards from OSK defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-06ARM: OMAP1: Refresh H2 defconfigTony Lindgren
Refresh H2 defconfig Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-06ARM: OMAP1: Refresh OSK defconfigTony Lindgren
Refresh OSK defconfig Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-09Merge branches 'master', 'omap1-upstream' and 'orion' into develRussell King
* master: [ARM] constify function pointer tables [ARM] 4823/1: AT91 section fix [ARM] 4824/1: pxa: clear RDH bit after any reset [ARM] pxa: remove debugging PM: printk * omap1-upstream: ARM: OMAP1: Misc clean-up ARM: OMAP1: Update defconfigs for omap1 ARM: OMAP1: Palm Tungsten E board clean-up ARM: OMAP1: Use I2C bus registration helper for omap1 ARM: OMAP1: Remove omap_sram_idle() ARM: OMAP1: PM fixes for OMAP1 ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board ARM: OMAP1: Make omap1 use MMC multislot structures ARM: OMAP1: Change the comments to C style ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data ARM: OMAP: Add helper module for board specific I2C bus registration ARM: OMAP: Add dmtimer support for OMAP3 ARM: OMAP: Pre-3430 clean-up for dmtimer.c ARM: OMAP: Add DMA support for chaining and 3430 ARM: OMAP: Add 24xx GPIO debounce support ARM: OMAP: Get rid of unnecessary ifdefs in GPIO code ARM: OMAP: Add 3430 gpio support ARM: OMAP: Add 3430 CPU identification macros ARM: OMAP: Request DSP memory for McBSP * orion: [ARM] Orion: Use the sata_mv driver for the TS-209 SATA [ARM] Orion: Use the sata_mv driver for the Kurobox SATA [ARM] Orion: free up kernel virtual address space [ARM] Orion: distinguish between physical and virtual addresses [ARM] Orion: kill orion_early_putstr() [ARM] Orion: update defconfig [ARM] Orion: Use the sata_mv driver for the integrated SATA controller
2008-02-08ARM: OMAP1: Update defconfigs for omap1Tony Lindgren
Update defconfigs for omap1 Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08ARM: OMAP1: Make omap1 use MMC multislot structuresFelipe Balbi
Make omap1 use new MMC multislot structures. The related MMC patches will be sent separately. Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br> Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: David Cohen <david.cohen@indt.org.br> Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08[ARM] Orion: update defconfigNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-02-04[ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boardsRod Whitby
Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig. Sets up the corresponding platform data for the nslu2 and nas100d boards, and reads the ethernet MAC address from the internal flash. Tested on both little-endian and big-endian kernels. Tested-by: Tom King <tom@websb.net> Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Michael Westerhof <mwester@dls.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4805/1: ixp4xx: Use leds-gpio driver instead of IXP4XX-GPIO-LED driverRod Whitby
These are the only three boards to use the IXP4XX-GPIO-LED driver, and they can all use the new leds-gpio driver instead with no change in functionality. -- Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boardsRod Whitby
This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branch 'pxa-plat' into develRussell King
* pxa-plat: (53 commits) [ARM] 4762/1: Basic support for Toradex Colibri module [ARM] pxa: fix mci_init functions returning -1 [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 [ARM] 4746/1: pcm027: network support for phyCORE-PXA270 [ARM] 4745/1: pcm027: default configuration [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module [NET] smc91x: Make smc91x use IRQ resource trigger flags [ARM] pxa: add default config for littleton [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) [ARM] 4664/1: Add basic support for HTC Magician PDA phones [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. [ARM] pxa: skip registers saving/restoring if entering standby mode [ARM] pxa: fix PXA27x resume [ARM] pxa: Avoid fiddling with CKEN register on suspend [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme [ARM] pxa: Add zylonite MFP wakeup configurations [ARM] pxa: program MFPs for low power mode when suspending [ARM] pxa: make MFP configuration processor independent [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions ... Conflicts: arch/arm/mach-pxa/ssp.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branch 'orion' into develRussell King
* orion: (26 commits) [ARM] Orion: implement power-off method for QNAP TS-109/209 [ARM] Orion: add support for QNAP TS-109/TS-209 [ARM] Orion: I2C support [I2C] i2c-mv64xxx: Don't set i2c_adapter.retries [I2C] Split mv643xx I2C platform support [ARM] Orion: enable CONFIG_RTC_DRV_M41T80 for D-Link DNS-323 [ARM] Orion defconfig [ARM] Orion: add support for Orion/MV88F5181 based D-Link DNS-323 [ARM] Orion: MV88F5181 support bits [ARM] Orion: Buffalo/Revogear Kurobox Pro support [ARM] OrionNAS RD board support [ARM] Orion: support for Marvell Orion-2 (88F5281) Development Board [ARM] Orion: common platform setup for Gigabit Ethernet port [ARM] Orion: platform device registration for UART, USB and NAND [ARM] Orion: system timer support [ARM] Orion edge GPIO IRQ support [ARM] Orion: IRQ support [ARM] Orion: provide GPIO method for enabling hardware assisted blinking [ARM] Orion: GPIO support [ARM] Orion: programable address map support ... Conflicts: arch/arm/Kconfig arch/arm/Makefile Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', ↵Russell King
's3c2410', 'sa1100' and 'vfp' into devel * at91: (24 commits) [ARM] 4615/4: sam926[13]ek buttons updated [ARM] 4765/1: [AT91] AT91CAP9A-DK board support [ARM] 4764/1: [AT91] AT91CAP9 core support [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation [ARM] 4761/1: [AT91] Board-support for NEW_LEDs [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200 [ARM] 4759/1: [AT91] Buttons on CSB300 [ARM] 4758/1: [AT91] LEDs [ARM] 4757/1: [AT91] UART initialization [ARM] 4756/1: [AT91] Makefile cleanup [ARM] 4755/1: [AT91] NAND update [ARM] 4754/1: [AT91] SSC library support [ARM] 4753/1: [AT91] Use DMA_BIT_MASK [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9 [ARM] 4751/1: [AT91] ISI peripheral on SAM9263 [ARM] 4750/1: [AT91] STN LCD displays on SAM9261 [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY [ARM] 4646/1: AT91: configurable HZ, default to 128 [ARM] 4688/1: at91: speed-up irq processing [ARM] 4657/1: AT91: Header definition update ... * ep93xx: [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups [ARM] 4668/1: ep93xx: implement new GPIO API * iop: [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device [ARM] 4708/1: iop: update defconfigs for 2.6.24 * kprobes: ARM kprobes: let's enable it ARM kprobes: special hook for the kprobes breakpoint handler ARM kprobes: prevent some functions involved with kprobes from being probed ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack ARM kprobes: add the kprobes hook to the page fault handler ARM kprobes: core code ARM kprobes: instruction single-stepping support * ks8695: [ARM] 4603/1: KS8695: debugfs interface to view pin state [ARM] 4601/1: KS8695: PCI support * misc: [ARM] remove duplicate includes [ARM] CONFIG_DEBUG_STACK_USAGE [ARM] 4689/1: small comment wrap fix [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS [SERIAL] 21285: Report baud rate back via termios [ARM] Remove pointless casts from void pointers, [ARM] Misc minor interrupt handler cleanups [ARM] Remove at91_lcdc.h [ARM] ARRAY_SIZE() cleanup [ARM] Update mach-types * msm: [ARM] msm: dma support for MSM7X00A [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A) [ARM] msm: irq and timer support for ARCH_MSM7X00A [ARM] msm: core platform support for ARCH_MSM7X00A * s3c2410: (33 commits) [ARM] 4795/1: S3C244X: Add armclk and setparent call [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk [ARM] 4790/1: S3C2412: Fix parent selection for msysclk. [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used. [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull() [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users [ARM] 4781/1: S3C24XX: DMA suspend and resume support [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call [ARM] 4778/1: S3C2412: Add armclk and init from DVS state [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected ... * sa1100: [ARM] sa1100: add clock source support * vfp: [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support [ARM] 4583/1: ARMv7: Add VFPv3 support [ARM] 4582/2: Add support for the common VFP subarchitecture
2008-01-28[ARM] 4762/1: Basic support for Toradex Colibri moduleDaniel Mack
This patch adds support for Toradex' PXA27x based Colibri module. It's kept as simple as possible to only provide basic functionality. A default config is also included. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4745/1: pcm027: default configurationRobert Schwebel
This patch adds a basic configration for the phyCORE-PXA270 development kit. In this case development kit means PCM-990 (main baseboard). Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] pxa: add default config for littletoneric miao
default to - PXA300/PXA310 support only (there isn't any littleton board with PXA320 processor for now) - smc91x ethernet support with NFS rootfs - LCD framebuffer support with graphics console Signed-off-by: eric miao <eric.miao> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.Ian Molton
This patch contains the base code to boot the Toshiba e330, e740, e750, e400, and e800 PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] Orion: add support for QNAP TS-109/TS-209Byron Bradley
This patch adds support for the Orion/MV88F5182 based QNAP TS-109/TS-209 NAS device. The driver for the S-35390A RTC chip on this board has been submitted to LKML separately. Signed-off-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Oyvind Repvik <repvik@kynisk.com> Tested-by: Tim Ellis <timtimred@foonas.org> Tested-by: Herbert Valerio Riedel <hvr@gnu.org> Acked-by: Tzachi Perelstein <tzachi@marvell.com>
2008-01-26[ARM] Orion: enable CONFIG_RTC_DRV_M41T80 for D-Link DNS-323Martin Michlmayr
The D-Link DNS-323 uses a M41T80 RTC chip, so enable this driver in the Orion defconfig. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Cc: Herbert Valerio Riedel <hvr@gnu.org> Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] Orion defconfigTzachi Perelstein
Basic selections for Orion machines Signed-off-by: Tzachi Perelstein <tzachi@marvell.com> Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] 4765/1: [AT91] AT91CAP9A-DK board supportAndrew Victor
Add support for the Atmel AT91CAP9A-DK Evaluation Kit board. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] remove reference to non-existent MTD_OBSOLETE_CHIPSRobert P. J. Day
The CONFIG variable MTD_OBSOLETE_CHIPS was deleted in commit ba7cc09c9c9e29a57045dc5bbf843ac1cfad3283. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A)Brian Swetland
Add support for the Qualcomm MSM7200A eval board. Common devices are defined in common.c, to avoid excessive cut'n'pasting them into other board files. Signed-off-by: Brian Swetland <swetland@google.com>
2008-01-26[ARM] 4708/1: iop: update defconfigs for 2.6.24Dan Williams
* iop13xx, iop33x, iop32x: re-enable the IOP_ADMA driver by default * iop32x: enable RS5C372 and RTC_CLASS support Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-31[ARM] 4636/1: pxa: add default configuration for zyloniteeric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15Merge branch 'pxa' into develRussell King
2007-10-15[ARM] 4576/1: CM-X270 machine supportMike Rapoport
This patch provides core support for CM-X270 platform. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-20ARM: OMAP: Add omap osk defconfigTony Lindgren
Add omap osk defconfig Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20ARM: OMAP: Update omap h2 defconfigTony Lindgren
Update omap h2 defconfig Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-08-06[ARM] rpc: update defconfigRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-01 21:45:29 +0000