aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/include/asm
AgeCommit message (Collapse)Author
2009-06-02[ARM] 5534/1: kmalloc must return a cache line aligned bufferMartin Fuzzey
Define ARCH_KMALLOC_MINALIGN in asm/cache.h At the request of Russell also move ARCH_SLAB_MINALIGN to this file. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-29Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] update mach-types [ARM] Add cmpxchg support for ARMv6+ systems (v5) [ARM] barriers: improve xchg, bitops and atomic SMP barriers Gemini: Fix SRAM/ROM location after memory swap MAINTAINER: Add F: entries for Gemini and FA526 [ARM] disable NX support for OABI-supporting kernels [ARM] add coherent DMA mask for mv643xx_eth [ARM] pxa/palm: fix PalmLD/T5/TX AC97 MFP [ARM] pxa: add parameter to clksrc_read() for pxa168/910 [ARM] pxa: fix the incorrectly defined drive strength macros for pxa{168,910} [ARM] Orion: Remove explicit name for platform device resources [ARM] Kirkwood: Correct MPP for SATA activity/presence LEDs of QNAP TS-119/TS-219. [ARM] pxa/ezx: fix pin configuration for low power mode [ARM] pxa/spitz: provide spitz_ohci_exit() that unregisters USB_HOST GPIO [ARM] pxa: enable GPIO receivers after configuring pins [ARM] pxa: allow gpio_reset drive high during normal work [ARM] pxa: save/restore PGSR on suspend/resume.
2009-05-29flat: fix data sections alignmentOskar Schirmer
The flat loader uses an architecture's flat_stack_align() to align the stack but assumes word-alignment is enough for the data sections. However, on the Xtensa S6000 we have registers up to 128bit width which can be used from userspace and therefor need userspace stack and data-section alignment of at least this size. This patch drops flat_stack_align() and uses the same alignment that is required for slab caches, ARCH_SLAB_MINALIGN, or wordsize if it's not defined by the architecture. It also fixes m32r which was obviously kaput, aligning an uninitialized stack entry instead of the stack pointer. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Oskar Schirmer <os@emlix.com> Cc: David Howells <dhowells@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <cooloney@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Johannes Weiner <jw@emlix.com> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-28[ARM] Add cmpxchg support for ARMv6+ systems (v5)Mathieu Desnoyers
Add cmpxchg/cmpxchg64 support for ARMv6K and ARMv7 systems (original patch from Catalin Marinas <catalin.marinas@arm.com>) The cmpxchg and cmpxchg64 functions can be implemented using the LDREX*/STREX* instructions. Since operand lengths other than 32bit are required, the full implementations are only available if the ARMv6K extensions are present (for the LDREXB, LDREXH and LDREXD instructions). For ARMv6, only 32-bits cmpxchg is available. Mathieu : Make cmpxchg_local always available with best implementation for all type sizes (1, 2, 4 bytes). Make cmpxchg64_local always available. Use "Ir" constraint for "old" operand, like atomic.h atomic_cmpxchg does. Change since v3 : - Add "memory" clobbers (thanks to Nicolas Pitre) - removed __asmeq(), only needed for old compilers, very unlikely on ARMv6+. Note : ARMv7-M should eventually be ifdefed-out of cmpxchg64. But it's not supported by the Linux kernel currently. Put back arm < v6 cmpxchg support. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Catalin Marinas <catalin.marinas@arm.com> CC: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-28[ARM] barriers: improve xchg, bitops and atomic SMP barriersRussell King
Mathieu Desnoyers pointed out that the ARM barriers were lacking: - cmpxchg, xchg and atomic add return need memory barriers on architectures which can reorder the relative order in which memory read/writes can be seen between CPUs, which seems to include recent ARM architectures. Those barriers are currently missing on ARM. - test_and_xxx_bit were missing SMP barriers. So put these barriers in. Provide separate atomic_add/atomic_sub operations which do not require barriers. Reported-Reviewed-and-Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17[ARM] smp: fix cpumask usage in ARM SMP codeRussell King
The ARM SMP code wasn't properly updated for the cpumask changes, which results in smp_timer_broadcast() broadcasting ticks to non-online CPUs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-07[ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation typesPaul Gortmaker
From: Bruce Ashfield <bruce.ashfield@windriver.com> To fully support the armv7-a instruction set/optimizations, support for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is required. The MOVW and MOVT are both load-immediate instructions, MOVW loads 16 bits into the bottom half of a register, and MOVT loads 16 bits into the top half of a register. The relocation information for these instructions has a full 32 bit value, plus an addend which is stored in the 16 immediate bits in the instruction itself. The immediate bits in the instruction are not contiguous (the register # splits it into a 4 bit and 12 bit value), so the addend has to be extracted accordingly and added to the value. The value is then split and put into the instruction; a MOVW uses the bottom 16 bits of the value, and a MOVT uses the top 16 bits. Signed-off-by: David Borman <david.borman@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-20[ARM] 5456/1: add sys_preadv and sys_pwritevMikael Pettersson
Kernel 2.6.30-rc1 added sys_preadv and sys_pwritev to most archs but not ARM, resulting in <stdin>:1421:2: warning: #warning syscall preadv not implemented <stdin>:1425:2: warning: #warning syscall pwritev not implemented This patch adds sys_preadv and sys_pwritev to ARM. These syscalls simply take five long-sized parameters, so they should have no calling-convention/ABI issues in the kernel. Tested on armv5tel eabi using a preadv/pwritev test program posted on linuxppc-dev earlier this month. It would be nice to get this into the kernel before 2.6.30 final, so that glibc's kernel version feature test for these syscalls doesn't have to special-case ARM. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-15[ARM] 5450/1: Flush only the needed range when unmapping a VMAAaro Koskinen
When unmapping N pages (e.g. shared memory) the amount of TLB flushes done can be (N*PAGE_SIZE/ZAP_BLOCK_SIZE)*N although it should be N at maximum. With PREEMPT kernel ZAP_BLOCK_SIZE is 8 pages, so there is a noticeable performance penalty when unmapping a large VMA and the system is spending its time in flush_tlb_range(). The problem is that tlb_end_vma() is always flushing the full VMA range. The subrange that needs to be flushed can be calculated by tlb_remove_tlb_entry(). This approach was suggested by Hugh Dickins, and is also used by other arches. The speed increase is roughly 3x for 8M mappings and for larger mappings even more. Signed-off-by: Aaro Koskinen <Aaro.Koskinen@nokia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-08[ARM] 5447/1: Add SZ_32KLinus Walleij
This adds a SZ_32K define to the available sizes. I need it for an upcoming platform support. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-02Allow rwlocks to re-enable interruptsRobin Holt
Pass the original flags to rwlock arch-code, so that it can re-enable interrupts if implemented for that architecture. Initially, make __raw_read_lock_flags and __raw_write_lock_flags stubs which just do the same thing as non-flags variants. Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <linux-arch@vger.kernel.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-28Merge branch 'master' into develRussell King
Conflicts: arch/arm/include/asm/elf.h arch/arm/kernel/module.c
2009-03-28Merge branch 'origin' into develRussell King
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-26Merge branch 'header-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'header-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits) x86: headers cleanup - setup.h emu101k1.h: fix duplicate include of <linux/types.h> compiler-gcc4: conditionalize #error on __KERNEL__ remove __KERNEL_STRICT_NAMES make netfilter use strict integer types make drm headers use strict integer types make MTD headers use strict integer types make most exported headers use strict integer types make exported headers use strict posix types unconditionally include asm/types.h from linux/types.h make linux/types.h as assembly safe Neither asm/types.h nor linux/types.h is required for arch/ia64/include/asm/fpu.h headers_check fix cleanup: linux/reiserfs_fs.h headers_check fix cleanup: linux/nubus.h headers_check fix cleanup: linux/coda_psdev.h headers_check fix: x86, setup.h headers_check fix: x86, prctl.h headers_check fix: linux/reinserfs_fs.h headers_check fix: linux/socket.h headers_check fix: linux/nubus.h ... Manually fix trivial conflicts in: include/linux/netfilter/xt_limit.h include/linux/netfilter/xt_statistic.h
2009-03-26Merge branch 'for-rmk' of git://gitorious.org/linux-gemini/mainline into develRussell King
Conflicts: arch/arm/mm/Kconfig Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-25ARM: Add support for FA526 v2Paulius Zaleckas
Adds support for Faraday FA526 core. This core is used at least by: Cortina Systems Gemini and Centroid family Cavium Networks ECONA family Grain Media GM8120 Pixelplus ImageARM Prolific PL-1029 Faraday IP evaluation boards v2: - move TLB_BTB to separate patch - update copyrights Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-03-25[ARM] 5431/1: scoop: completely drop old-style SCOOP GPIO accessorsDmitry Baryshkov
Now, as all places that use Scoop GPIO have been converted to use GPIO API, drop old-style accessors completely. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-25ARM: tlbflush.h: introduce TLB_BTB flagPaulius Zaleckas
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
2009-03-24Merge branch 'highmem' into develRussell King
2009-03-24Merge branch 'devel' of ↵root
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-03-23[ARM] pxa: add base support for Marvell's PXA168 processor lineEric Miao
"""The Marvell® PXA168 processor is the first in a family of application processors targeted at mass market opportunities in computing and consumer devices. It balances high computing and multimedia performance with low power consumption to support extended battery life, and includes a wealth of integrated peripherals to reduce overall BOM cost .... """ See http://www.marvell.com/featured/pxa168.jsp for more information. 1. Marvell Mohawk core is a hybrid of xscale3 and its own ARM core, there are many enhancements like instructions for flushing the whole D-cache, and so on 2. Clock reuses Russell's common clkdev, and added the basic support for UART1/2. 3. Devices are a bit different from the 'mach-pxa' way, the platform devices are now dynamically allocated only when necessary (i.e. when pxa_register_device() is called). Description for each device are stored in an array of 'struct pxa_device_desc'. Now that: a. this array of device description is marked with __initdata and can be freed up system is fully up b. which means board code has to add all needed devices early in his initializing function c. platform specific data can now be marked as __initdata since they are allocated and copied by platform_device_add_data() 4. only the basic UART1/2/3 are added, more devices will come later. Signed-off-by: Jason Chagas <chagas@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-21[ARM] 5428/1: Module relocation update for R_ARM_V4BXDaniel Silverstone
It would seem when building kernel modules with modern binutils (required by modern GCC) for ARM v4T targets (specifically observed with the Samsung 24xx SoC which is an 920T) R_ARM_V4BX relocations are emitted for function epilogues. This manifests at module load time with an "unknown relocation: 40" error message. The following patch adds the R_ARM_V4BX relocation to the ARM kernel module loader. The relocation operation is taken from that within the binutils bfd library. Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-19[ARM] pass reboot command line to arch_reset()Russell King
OMAP wishes to pass state to the boot loader upon reboot in order to instruct it whether to wait for USB-based reflashing or not. There is already a facility to do this via the reboot() syscall, except we ignore the string passed to machine_restart(). This patch fixes things to pass this string to arch_reset(). This means that we keep the reboot mode limited to telling the kernel _how_ to perform the reboot which should be independent of what we request the boot loader to do. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-17Merge branch 'for-russell' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 into devel
2009-03-17IXP4xx: workaround for PCI prefetch problems near 64 MB boundary.Krzysztof Hałasa
Map unused registers at the end of DMA region at 64 MB to allow PCI masters to cross the boundary when prefetching data from SDRAM. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-03-15[ARM] Feroceon: add highmem support to L2 cache handling codeNicolas Pitre
The choice is between looping over the physical range and performing single cache line operations, or to map highmem pages somewhere, as cache range ops are possible only on virtual addresses. Because L2 range ops are much faster, we go with the later by factoring the physical-to-virtual address conversion and use a fixmap entry for it in the HIGHMEM case. Possible future optimizations to avoid the pte setup cost: - do the pte setup for highmem pages only - determine a threshold for doing a line-by-line processing on physical addresses when the range is small Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-15[ARM] make page_to_dma() highmem awareNicolas Pitre
If a machine class has a custom __virt_to_bus() implementation then it must provide a __arch_page_to_dma() implementation as well which is _not_ based on page_address() to support highmem. This patch fixes existing __arch_page_to_dma() and provide a default implementation otherwise. The default implementation for highmem is based on __pfn_to_bus() which is defined only when no custom __virt_to_bus() is provided by the machine class. That leaves only ebsa110 and footbridge which cannot support highmem until they provide their own __arch_page_to_dma() implementation. But highmem support on those legacy platforms with limited memory is certainly not a priority. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-15[ARM] introduce dma_cache_maint_page()Nicolas Pitre
This is a helper to be used by the DMA mapping API to handle cache maintenance for memory identified by a page structure instead of a virtual address. Those pages may or may not be highmem pages, and when they're highmem pages, they may or may not be virtually mapped. When they're not mapped then there is no L1 cache to worry about. But even in that case the L2 cache must be processed since unmapped highmem pages can still be L2 cached. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-15[ARM] kmap supportNicolas Pitre
The kmap virtual area borrows a 2MB range at the top of the 16MB area below PAGE_OFFSET currently reserved for kernel modules and/or the XIP kernel. This 2MB corresponds to the range covered by 2 consecutive second-level page tables, or a single pmd entry as seen by the Linux page table abstraction. Because XIP kernels are unlikely to be seen on systems needing highmem support, there shouldn't be any shortage of VM space for modules (14 MB for modules is still way more than twice the typical usage). Because the virtual mapping of highmem pages can go away at any moment after kunmap() is called on them, we need to bypass the delayed cache flushing provided by flush_dcache_page() in that case. The atomic kmap versions are based on fixmaps, and __cpuc_flush_dcache_page() is used directly in that case. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-15[ARM] fixmap supportNicolas Pitre
This is the minimum fixmap interface expected to be implemented by architectures supporting highmem. We have a second level page table already allocated and covering 0xfff00000-0xffffffff because the exception vector page is located at 0xffff0000, and various cache tricks already use some entries above 0xffff0000. Therefore the PTEs covering 0xfff00000-0xfffeffff are free to be used. However the XScale cache flushing code already uses virtual addresses between 0xfffe0000 and 0xfffeffff. So this reserves the 0xfff00000-0xfffdffff range for fixmap stuff. The Documentation/arm/memory.txt information is updated accordingly, including the information about the actual top of DMA memory mapping region which didn't match the code. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-12[ARM] 5422/1: ARM: MMU: add a Non-cacheable Normal executable memory typePaul Walmsley
This patch adds a Non-cacheable Normal ARM executable memory type, MT_MEMORY_NONCACHED. On OMAP3, this is used for rapid dynamic voltage/frequency scaling in the VDD2 voltage domain. OMAP3's SDRAM controller (SDRC) is in the VDD2 voltage domain, and its clock frequency must change along with voltage. The SDRC clock change code cannot run from SDRAM itself, since SDRAM accesses are paused during the clock change. So the current implementation of the DVFS code executes from OMAP on-chip SRAM, aka "OCM RAM." If the OCM RAM pages are marked as Cacheable, the ARM cache controller will attempt to flush dirty cache lines to the SDRC, so it can fill those lines with OCM RAM instruction code. The problem is that the SDRC is paused during DVFS, and so any SDRAM access causes the ARM MPU subsystem to hang. TI's original solution to this problem was to mark the OCM RAM sections as Strongly Ordered memory, thus preventing caching. This is overkill: since the memory is marked as non-bufferable, OCM RAM writes become needlessly slow. The idea of "Strongly Ordered SRAM" is also conceptually disturbing. Previous LAKML list discussion is here: http://www.spinics.net/lists/arm-kernel/msg54312.html This memory type MT_MEMORY_NONCACHED is used for OCM RAM by a future patch. Cc: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-21Merge branch 'dma' into develRussell King
Conflicts: arch/arm/plat-mxc/dma-mx1-mx2.c
2009-02-21[ARM] dma: move IOMD and floppy DMA structures to RiscPC DMA codeRussell King
There's no point these being in a generic include file when they're only used in arch/arm/mach-rpc/dma.c. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19[ARM] 5384/1: unwind: Add stack unwinding support for loadable modulesCatalin Marinas
This patch adds ELF section parsing for the unwinding tables in loadable modules together with the PREL31 relocation symbol resolving. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19[ARM] 5383/2: unwind: Add core support for ARM stack unwindingCatalin Marinas
This patch adds the main functionality for parsing the stack unwinding information generated by the ARM EABI toolchains. The unwinding information consists of an index with a pair of words per function and a table with unwinding instructions. For more information, see "Exception Handling ABI for the ARM Architecture" at: http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-15net: new user space API for time stamping of incoming and outgoing packetsPatrick Ohly
User space can request hardware and/or software time stamping. Reporting of the result(s) via a new control message is enabled separately for each field in the message because some of the fields may require additional computation and thus cause overhead. User space can tell the different kinds of time stamps apart and choose what suits its needs. When a TX timestamp operation is requested, the TX skb will be cloned and the clone will be time stamped (in hardware or software) and added to the socket error queue of the skb, if the skb has a socket associated with it. The actual TX timestamp will reach userspace as a RX timestamp on the cloned packet. If timestamping is requested and no timestamping is done in the device driver (potentially this may use hardware timestamping), it will be done in software after the device's start_hard_xmit routine. Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-12[ARM] 5382/1: unwind: Reorganise the stacktrace supportCatalin Marinas
This patch changes the walk_stacktrace and its callers for easier integration of stack unwinding. The arch/arm/kernel/stacktrace.h file is also moved to arch/arm/include/asm/stacktrace.h. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12[ARM] 5381/1: unwind: Reorganise the traps.c codeCatalin Marinas
This patch moves code around in the arch/arm/kernel/traps.c file for easier integration of the stack unwinding support. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12[ARM] 5388/1: Add hwcap bits for VFPv3 and VFPv3D16Catalin Marinas
The VFPv3D16 is a VFPv3 CPU configuration where only 16 double registers are present, as the VFPv2 configuration. This patch adds the corresponding hwcap bits so that applications or debuggers have more information about the supported features. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12[ARM] 5387/1: Add ptrace VFP support on ARMCatalin Marinas
This patch adds ptrace support for setting and getting the VFP registers using PTRACE_SETVFPREGS and PTRACE_GETVFPREGS. The user_vfp structure defined in asm/user.h contains 32 double registers (to cover VFPv3 and Neon hardware) and the FPSCR register. Cc: Paul Brook <paul@codesourcery.com> Cc: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-01headers_check fix: arm, swab.hJaswinder Singh Rajput
fix the following 'make headers_check' warnings: usr/include/asm-arm/swab.h:19: include of <linux/types.h> is preferred over <asm/types.h> usr/include/asm-arm/swab.h:25: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-02-01headers_check fix: arm, setup.hJaswinder Singh Rajput
fix the following 'make headers_check' warnings: usr/include/asm-arm/setup.h:17: include of <linux/types.h> is preferred over <asm/types.h> usr/include/asm-arm/setup.h:25: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-02-01headers_check fix: arm, a.out.hJaswinder Singh Rajput
fix the following 'make headers_check' warnings: usr/include/asm-arm/a.out.h:5: include of <linux/types.h> is preferred over <asm/types.h> usr/include/asm-arm/a.out.h:9: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-14byteorder: make swab.h include asm/swab.h like a regular headerHarvey Harrison
Add swab.h to kbuild.asm and remove the individual entries from each arch, mark as unifdef as some arches have some kernel-only bits inside. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08NOMMU: Make VMAs per MM as for MMU-mode linuxDavid Howells
Make VMAs per mm_struct as for MMU-mode linux. This solves two problems: (1) In SYSV SHM where nattch for a segment does not reflect the number of shmat's (and forks) done. (2) In mmap() where the VMA's vm_mm is set to point to the parent mm by an exec'ing process when VM_EXECUTABLE is specified, regardless of the fact that a VMA might be shared and already have its vm_mm assigned to another process or a dead process. A new struct (vm_region) is introduced to track a mapped region and to remember the circumstances under which it may be shared and the vm_list_struct structure is discarded as it's no longer required. This patch makes the following additional changes: (1) Regions are now allocated with alloc_pages() rather than kmalloc() and with no recourse to __GFP_COMP, so the pages are not composite. Instead, each page has a reference on it held by the region. Anything else that is interested in such a page will have to get a reference on it to retain it. When the pages are released due to unmapping, each page is passed to put_page() and will be freed when the page usage count reaches zero. (2) Excess pages are trimmed after an allocation as the allocation must be made as a power-of-2 quantity of pages. (3) VMAs are added to the parent MM's R/B tree and mmap lists. As an MM may end up with overlapping VMAs within the tree, the VMA struct address is appended to the sort key. (4) Non-anonymous VMAs are now added to the backing inode's prio list. (5) Holes may be punched in anonymous VMAs with munmap(), releasing parts of the backing region. The VMA and region structs will be split if necessary. (6) sys_shmdt() only releases one attachment to a SYSV IPC shared memory segment instead of all the attachments at that addresss. Multiple shmat()'s return the same address under NOMMU-mode instead of different virtual addresses as under MMU-mode. (7) Core dumping for ELF-FDPIC requires fewer exceptions for NOMMU-mode. (8) /proc/maps is now the global list of mapped regions, and may list bits that aren't actually mapped anywhere. (9) /proc/meminfo gains a line (tagged "MmapCopy") that indicates the amount of RAM currently allocated by mmap to hold mappable regions that can't be mapped directly. These are copies of the backing device or file if not anonymous. These changes make NOMMU mode more similar to MMU mode. The downside is that NOMMU mode requires some extra memory to track things over NOMMU without this patch (VMAs are no longer shared, and there are now region structs). Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org>
2009-01-07PCI: arm: use generic INTx swizzle from PCI coreBjorn Helgaas
Use the generic pci_common_swizzle() instead of arch-specific code. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-06arm: introduce asm/swab.hHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06atomic_t: unify all arch definitionsMatthew Wilcox
The atomic_t type cannot currently be used in some header files because it would create an include loop with asm/atomic.h. Move the type definition to linux/types.h to break the loop. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02[ARM] dma: remove dmamode_t typedefRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-02[ARM] dma: make DMA_MODE_xxx reflect ISA DMA settingsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>