aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/include/asm
AgeCommit message (Collapse)Author
2009-08-15ARM: Fix broken highmem supportRussell King
Currently, highmem is selectable, and you can request an increased vmalloc area. However, none of this has any effect on the memory layout since a patch in the highmem series was accidentally dropped. Moreover, even if you did want highmem, all memory would still be registered as lowmem, possibly resulting in overflow of the available virtual mapping space. The highmem boundary is determined by the highest allowed beginning of the vmalloc area, which depends on its configurable minimum size (see commit 60296c71f6c5063e3c1f1d2619ca0b60940162e7 for details on this). We should create mappings and initialize bootmem only for low memory, while the zone allocator must still be told about highmem. Currently, memory nodes which are completely located in high memory are not supported. This is not a huge limitation since systems relying on highmem support are unlikely to have discontiguous memory with large holes. [ A similar patch was meant to be merged before commit 5f0fbf9ecaf3 and be available in Linux v2.6.30, however some git rebase screw-up of mine dropped the first commit of the series, and that goofage escaped testing somehow as well. -- Nico ] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Nicolas Pitre <nico@marvell.com>
2009-07-30Merge branch 's3c-fixes-rc4' of git://aeryn.fluff.org.uk/bjdooks/linuxRussell King
2009-07-27mm: Pass virtual address to [__]p{te,ud,md}_free_tlb()Benjamin Herrenschmidt
mm: Pass virtual address to [__]p{te,ud,md}_free_tlb() Upcoming paches to support the new 64-bit "BookE" powerpc architecture will need to have the virtual address corresponding to PTE page when freeing it, due to the way the HW table walker works. Basically, the TLB can be loaded with "large" pages that cover the whole virtual space (well, sort-of, half of it actually) represented by a PTE page, and which contain an "indirect" bit indicating that this TLB entry RPN points to an array of PTEs from which the TLB can then create direct entries. Thus, in order to invalidate those when PTE pages are deleted, we need the virtual address to pass to tlbilx or tlbivax instructions. The old trick of sticking it somewhere in the PTE page struct page sucks too much, the address is almost readily available in all call sites and almost everybody implemets these as macros, so we may as well add the argument everywhere. I added it to the pmd and pud variants for consistency. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: David Howells <dhowells@redhat.com> [MN10300 & FRV] Acked-by: Nick Piggin <npiggin@suse.de> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-25ARM: includecheck fix: atomic.hJaswinder Singh Rajput
fix the following 'make includecheck' warning: arch/arm/include/asm/atomic.h: asm/system.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-10sched: INIT_PREEMPT_COUNTPeter Zijlstra
Pull the initial preempt_count value into a single definition site. Maintainers for: alpha, ia64 and m68k, please have a look, your arch code is funny. The header magic is a bit odd, but similar to the KERNEL_DS one, CPP waits with expanding these macros until the INIT_THREAD_INFO macro itself is expanded, which is in arch/*/kernel/init_task.c where we've already included sched.h so we're good. Cc: tony.luck@intel.com Cc: rth@twiddle.net Cc: geert@linux-m68k.org Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-05[ARM] pgtable: file pte layout documentationRussell King
Document the layout of our file PTE entries. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-05[ARM] pgtable: swp pte layout documentation, definitions, and checkRussell King
Document the layout of our swp PTE entries, adding definitions for the bit masks/shifts/sizes, and implement MAX_SWAPFILES_CHECK() such that we fail to build if we are unable to properly encode the swp type field. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-25[ARM] 5565/2: Use PAGE_SIZE and RO_DATA() in link scriptLinus Walleij
Update the link script for ARM to use PAGE_SIZE instead of hard- coded 4096. Also the old RODATA macro is deprecated for the RO_DATA(PAGE_SIZE) macro. As a consequence the PAGE_SIZE was changed from (1UL << PAGE_SHIFT) to (_AC(1,UL) << PAGE_SHIFT) because the linker does not understand the "UL" suffix to numeric constants. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-20[ARM] wire up rt_tgsigqueueinfo and perf_counter_openRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-17Delete pcibios_select_rootMatthew Wilcox
This function was only used by pci_claim_resource(), and the last commit deleted that use. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-14Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5545/2: add flush_kernel_dcache_page() for ARM
2009-06-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
2009-06-14[ARM] 5545/2: add flush_kernel_dcache_page() for ARMNicolas Pitre
Without this, the default implementation is a no op which is completely wrong with a VIVT cache, and usage of sg_copy_buffer() produces unpredictable results. Tested-by: Sebastian Andrzej Siewior <bigeasy@breakpoint.cc> CC: stable@kernel.org Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-14Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-06-14Merge branch 'copy_user' of git://git.marvell.com/orion into develRussell King
2009-06-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: add generic lib/checksum.c asm-generic: add a generic uaccess.h asm-generic: add generic NOMMU versions of some headers asm-generic: add generic atomic.h and io.h asm-generic: add legacy I/O header files asm-generic: add generic versions of common headers asm-generic: make bitops.h usable asm-generic: make pci.h usable directly asm-generic: make get_rtc_time overridable asm-generic: rename page.h and uaccess.h asm-generic: rename atomic.h to atomic-long.h asm-generic: add a generic unistd.h asm-generic: add generic ABI headers asm-generic: add generic sysv ipc headers asm-generic: introduce asm/bitsperlong.h asm-generic: rename termios.h, signal.h and mman.h
2009-06-12PM: Remove unused asm/suspend.hMagnus Damm
This patch removes unused asm/suspend.h files for the following architectures: alpha, arm, ia64, m68k, mips, s390, um Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-11asm-generic: rename page.h and uaccess.hArnd Bergmann
The current asm-generic/page.h only contains the get_order function, and asm-generic/uaccess.h only implements unaligned accesses. This renames the file to getorder.h and uaccess-unaligned.h to make room for new page.h and uaccess.h file that will be usable by all simple (e.g. nommu) architectures. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2009-06-11asm-generic: rename atomic.h to atomic-long.hArnd Bergmann
The existing asm-generic/atomic.h only defines the atomic_long type. This renames it to atomic-long.h so we have a place to add a truly generic atomic.h that can be used on all non-SMP systems. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-06-11asm-generic: introduce asm/bitsperlong.hArnd Bergmann
This provides a reliable way for asm-generic/types.h and other files to find out if it is running on a 32 or 64 bit platform. We cannot use CONFIG_64BIT for this in headers that are included from user space because CONFIG symbols are not available there. We also cannot do it inside of asm/types.h because some headers need the word size but cannot include types.h. The solution is to introduce a new header <asm/bitsperlong.h> that defines both __BITS_PER_LONG for user space and BITS_PER_LONG for usage in the kernel. The asm-generic version falls back to 32 bit unless the architecture overrides it, which I did for all 64 bit platforms. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2009-06-11asm-generic: rename termios.h, signal.h and mman.hArnd Bergmann
The existing asm-generic versions are incomplete and included by some architectures. New architectures should be able to use a generic version, so rename the existing files and change all users, which lets us add the new files. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2009-06-11Merge branch 'for-rmk' of git://linux-arm.org/linux-2.6 into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/kernel/smp.c arch/arm/mach-realview/Makefile arch/arm/mach-realview/platsmp.c
2009-06-11[ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specificDmitry Eremin-Solenikov
collie_pm was the only non-PXA user of sharpsl_pm. Now as it's gone we can merge code into one single file to allow further cleanup. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-10Merge branch for-rmk-devel of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2009-06-08Merge branch 'for-rmk' of git://git.marvell.com/orion into develRussell King
2009-06-08[ARM] Kirkwood: create a mapping for the Security Accelerator SRAMNicolas Pitre
Always creating the physical mapping should do no harm, so let's remove the interface that was provided for its optional creation and make the mapping static. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-06-02[ARM] 5534/1: kmalloc must return a cache line aligned bufferMartin Fuzzey
Define ARCH_KMALLOC_MINALIGN in asm/cache.h At the request of Russell also move ARCH_SLAB_MINALIGN to this file. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-01Merge branch 'smp' into develRussell King
2009-05-30Add core support for ARMv6/v7 big-endianCatalin Marinas
Starting with ARMv6, the CPUs support the BE-8 variant of big-endian (byte-invariant). This patch adds the core support: - setting of the BE-8 mode via the CPSR.E register for both kernel and user threads - big-endian page table walking - REV used to rotate instructions read from memory during fault processing as they are still little-endian format - Kconfig and Makefile support for BE-8. The --be8 option must be passed to the final linking stage to convert the instructions to little-endian Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-05-30Clear the IT state when invoking a Thumb-2 signal handlerCatalin Marinas
If a process is interrupted during an If-Then block and a signal is invoked, the ITSTATE bits must be cleared otherwise the handler would not run correctly. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Joseph S. Myers <joseph@codesourcery.com>
2009-05-30Check whether the TLB operations need broadcasting on SMP systemsCatalin Marinas
ARMv7 SMP hardware can handle the TLB maintenance operations broadcasting in hardware so that the software can avoid the costly IPIs. This patch adds the necessary checks (the MMFR3 CPUID register) to avoid the broadcasting if already supported by the hardware. (this patch is based on the work done by Tony Thompson @ ARM) Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-05-30RealView: Add support for the RealView/PBX platformColin Tuckley
This is a RealView platform supporting core tiles with ARM11MPCore, Cortex-A8 or Cortex-A9 (multicore) processors. It has support for MMC, CompactFlash, PCI-E. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-05-29[ARM] allow for alternative __copy_to_user/__clear_user implementationsNicolas Pitre
This allows for optional alternative implementations of __copy_to_user and __clear_user, with a possible runtime fallback to the standard version when the alternative provides no gain over that standard version. This is done by making the standard __copy_to_user into a weak alias for the symbol __copy_to_user_std. Same thing for __clear_user. Those two functions are particularly good candidates to have alternative implementations for, since they rely on the STRT instruction which has lower performances than STM instructions on some CPU cores such as the ARM1176 and Marvell Feroceon. Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-05-29Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] update mach-types [ARM] Add cmpxchg support for ARMv6+ systems (v5) [ARM] barriers: improve xchg, bitops and atomic SMP barriers Gemini: Fix SRAM/ROM location after memory swap MAINTAINER: Add F: entries for Gemini and FA526 [ARM] disable NX support for OABI-supporting kernels [ARM] add coherent DMA mask for mv643xx_eth [ARM] pxa/palm: fix PalmLD/T5/TX AC97 MFP [ARM] pxa: add parameter to clksrc_read() for pxa168/910 [ARM] pxa: fix the incorrectly defined drive strength macros for pxa{168,910} [ARM] Orion: Remove explicit name for platform device resources [ARM] Kirkwood: Correct MPP for SATA activity/presence LEDs of QNAP TS-119/TS-219. [ARM] pxa/ezx: fix pin configuration for low power mode [ARM] pxa/spitz: provide spitz_ohci_exit() that unregisters USB_HOST GPIO [ARM] pxa: enable GPIO receivers after configuring pins [ARM] pxa: allow gpio_reset drive high during normal work [ARM] pxa: save/restore PGSR on suspend/resume.
2009-05-29flat: fix data sections alignmentOskar Schirmer
The flat loader uses an architecture's flat_stack_align() to align the stack but assumes word-alignment is enough for the data sections. However, on the Xtensa S6000 we have registers up to 128bit width which can be used from userspace and therefor need userspace stack and data-section alignment of at least this size. This patch drops flat_stack_align() and uses the same alignment that is required for slab caches, ARCH_SLAB_MINALIGN, or wordsize if it's not defined by the architecture. It also fixes m32r which was obviously kaput, aligning an uninitialized stack entry instead of the stack pointer. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Oskar Schirmer <os@emlix.com> Cc: David Howells <dhowells@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <cooloney@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Johannes Weiner <jw@emlix.com> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-29Merge branch 'for-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into devel
2009-05-28[ARM] Add cmpxchg support for ARMv6+ systems (v5)Mathieu Desnoyers
Add cmpxchg/cmpxchg64 support for ARMv6K and ARMv7 systems (original patch from Catalin Marinas <catalin.marinas@arm.com>) The cmpxchg and cmpxchg64 functions can be implemented using the LDREX*/STREX* instructions. Since operand lengths other than 32bit are required, the full implementations are only available if the ARMv6K extensions are present (for the LDREXB, LDREXH and LDREXD instructions). For ARMv6, only 32-bits cmpxchg is available. Mathieu : Make cmpxchg_local always available with best implementation for all type sizes (1, 2, 4 bytes). Make cmpxchg64_local always available. Use "Ir" constraint for "old" operand, like atomic.h atomic_cmpxchg does. Change since v3 : - Add "memory" clobbers (thanks to Nicolas Pitre) - removed __asmeq(), only needed for old compilers, very unlikely on ARMv6+. Note : ARMv7-M should eventually be ifdefed-out of cmpxchg64. But it's not supported by the Linux kernel currently. Put back arm < v6 cmpxchg support. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Catalin Marinas <catalin.marinas@arm.com> CC: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-28[ARM] barriers: improve xchg, bitops and atomic SMP barriersRussell King
Mathieu Desnoyers pointed out that the ARM barriers were lacking: - cmpxchg, xchg and atomic add return need memory barriers on architectures which can reorder the relative order in which memory read/writes can be seen between CPUs, which seems to include recent ARM architectures. Those barriers are currently missing on ARM. - test_and_xxx_bit were missing SMP barriers. So put these barriers in. Provide separate atomic_add/atomic_sub operations which do not require barriers. Reported-Reviewed-and-Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-28[ARM] smp: use new cpumask functionsRussell King
Convert cpu_*_mask bit twiddling to the new set_cpu_*() API. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-25Merge branch 'iommu' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git into devel
2009-05-23Merge branch 'ixp4xx' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 into devel
2009-05-19omap iommu: simple virtual address space managementHiroshi DOYU
This patch provides a device drivers, which has a omap iommu, with address mapping APIs between device virtual address(iommu), physical address and MPU virtual address. There are 4 possible patterns for iommu virtual address(iova/da) mapping. |iova/ mapping iommu_ page | da pa va (d)-(p)-(v) function type --------------------------------------------------------------------------- 1 | c c c 1 - 1 - 1 _kmap() / _kunmap() s 2 | c c,a c 1 - 1 - 1 _kmalloc()/ _kfree() s 3 | c d c 1 - n - 1 _vmap() / _vunmap() s 4 | c d,a c 1 - n - 1 _vmalloc()/ _vfree() n* 'iova': device iommu virtual address 'da': alias of 'iova' 'pa': physical address 'va': mpu virtual address 'c': contiguous memory area 'd': dicontiguous memory area 'a': anonymous memory allocation '()': optional feature 'n': a normal page(4KB) size is used. 's': multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used. '*': not yet, but feasible. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-05-18[ARM] S3C: Merge next-s3c64xx-dma2 into for-rmk-develBen Dooks
Merge branch 'next-s3c64xx-dma2' into for-rmk-devel Conflicts: arch/arm/plat-s3c64xx/Makefile
2009-05-18[ARM] S3C64XX: DMA supportBen Dooks
Add support for the DMA blocks in the S3C64XX series of CPUS, which are based on the ARM PL080 PrimeCell system. Unfortunately, these DMA controllers diverge from the PL080 design by adding another DMA controller register and configuration for OneNAND. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-17[ARM] smp: allow re-use of realview localtimer TWD supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17[ARM] smp: separate SCU support code from realviewRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17[ARM] smp: SCU is used on non-realview platformsRussell King
The SCU can be used by non-realview platforms, so make it visible for other people to use rather than having them copy the header file. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17[ARM] smp: move core localtimer support out of platform specific filesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-17[ARM] smp: fix cpumask usage in ARM SMP codeRussell King
The ARM SMP code wasn't properly updated for the cpumask changes, which results in smp_timer_broadcast() broadcasting ticks to non-online CPUs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-07[ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation typesPaul Gortmaker
From: Bruce Ashfield <bruce.ashfield@windriver.com> To fully support the armv7-a instruction set/optimizations, support for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is required. The MOVW and MOVT are both load-immediate instructions, MOVW loads 16 bits into the bottom half of a register, and MOVT loads 16 bits into the top half of a register. The relocation information for these instructions has a full 32 bit value, plus an addend which is stored in the 16 immediate bits in the instruction itself. The immediate bits in the instruction are not contiguous (the register # splits it into a 4 bit and 12 bit value), so the addend has to be extracted accordingly and added to the value. The value is then split and put into the instruction; a MOVW uses the bottom 16 bits of the value, and a MOVT uses the top 16 bits. Signed-off-by: David Borman <david.borman@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>