aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91
AgeCommit message (Collapse)Author
2008-07-27Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix shared mmap when more than two maps of the same file exist [ARM] fix VIPT/VIVT macro optimisations, add comments [ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_* [ARM] update defconfig for eseries. [ARM] PXA: squash warning in pxafb [ARM] pxa: PXA25x UDC - Fix warning during build [ARM] fix nwflash.c: 6ee8928d94841aa764aeaf645ad16daff811dc26 [ARM] fix IOP32x, IOP33x, MXC and Samsung builds [ARM] pci: provide dummy pci_get_legacy_ide_irq() [ARM] fix fls() for 64-bit arguments [ARM] fix mode for board-yl-9200.c [ARM] 5176/1: arm/Makefile: fix: ARM946T -> ARM946E
2008-07-27[ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_*Dmitry Baryshkov
IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1]. Remove them completely. Sed script for the reference: s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_PROBE/IRQ_TYPE_PROBE/g s/IRQT_NOEDGE/IRQ_TYPE_NONE/g Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-26[ARM] fix mode for board-yl-9200.cRussell King
Xose Vazquez Perez points out that this file should not be marked executable. Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-25Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6David Woodhouse
2008-07-11Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-07-10Merge branches 'at91', 'dyntick', 'ep93xx', 'iop', 'ixp', 'misc', 'orion', ↵Russell King
'omap-reviewed', 'rpc', 'rtc' and 's3c' into devel
2008-07-10[ARM] 5130/4: Support for the at91sam9g20sedji gaouaou
Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09[ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits.Patrice Vilchez
New timings are based on application note "NAND Flash Support on AT91SAM9 Microcontrollers" available at http://atmel.com/dyn/resources/prod_documents/doc6255.pdf). Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-07[MTD] [NAND] rename at91_nand -> atmel_nand: internal symbolsHåvard Skinnemoen
This is basically s/at91_nand/atmel_nand/g with some manual inspection. Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-02[ARM] 4940/1: AT91: UDPHS driver: SAM9RL board and cpu integration.Nicolas Ferre
Adds support for the USB High Speed Device Port on the AT91SAM9RL system on chip. The AT91SAM9RL uses the same UDPHS IP as the AVR32 and the AT91CAP9 (atmel_usba_udc driver). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 4934/1: AT91CAP9 UDPHS driver: board and cpu integration.Stelian Pop
This is patch 2 of 2 adding support for the USB High Speed Device Port on the AT91CAP9 system on chip. The AT91CAP9 uses the same UDPHS IP as the AVR32 and the AT91SAM9RL. This patch declares the UDPHS ressources in the at91cap9 (cpu and adk board) files, wires up the atmel_usba_udc driver to them, and activates the driver in the defconfig. Signed-off-by: Stelian Pop <stelian@popies.net> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 4933/1: AT91CAP9 UDPHS driver: generic AT91 parts.Stelian Pop
This is patch 1 of 2 adding support for the USB High Speed Device Port on the AT91CAP9 system on chip. The AT91CAP9 uses the same UDPHS IP as the AVR32 and the AT91SAM9RL. This patch makes the generic AT91 adaptations, mainly dealing with the addition of the UDPHS UTMI clock. Signed-off-by: Stelian Pop <stelian@popies.net> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 5059/1: [AT91] Convert to new-style UART initializationAndrew Victor
Convert the following AT91RM9200-based boards to the new-style UART initialization: - Conitec ARM&EVA - Atmel AT91RM9200-DK - Embest ATEB9200 - Atmel AT91RM9200-EK - KwikByte KB920x Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 5057/1: [AT91] Calao Systems - board filesAndrew Victor
Add support for three AT91-based boards available from Calao Systems: USB_A9260, USB_A9263 and QIL_A9260. Signed-off-by: Grégory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-02[ARM] 5056/1: [AT91] Cleanup YL9200 board fileAndrew Victor
Cleanup the YL9200 board-support file. Other things fixed are: - Use new-style UART initialization - Register all LEDs as gpio_leds. - NOR Flash error noted in comments fixed by increasing YL9200_FLASH_SIZE - The only I2C device is the AT24C eeprom. - Setup of NWAIT pin and programming of SMC controller for the LCD/VGA. - Configure touchscreen interrupt pin. Also adding the board to the KConfig and Makefile. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-23[ARM] 5052/1: export clock functions for the at91x40Greg Ungerer
Export the AT91 clock functions for the AT91X40. Some external code common to all AT91 family parts relys on this, like the gpio and serial support. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-14atmel_lcdfb: fix initialization of a pre-allocated framebufferNicolas Ferre
Fix initialization of framebuffer not calling ioremap_writecombine() function and not using internal SRAM for at91sam9rl. This is a little rework of the "Don't initialize a pre-allocated framebuffer" patch that corrects the call to ioremap_writecombine() function. It also cuts the use of internal SRAM for at91sam9rl : it is a bit small for a framebuffer. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (26 commits) [ARM] pxa: fix 1c104e0e4f6ab396960c058e95e18bdedcac945b [ARM] serial: s3c2410: platform_get_irq() may return signed unnoticed [ARM] am79c961a: platform_get_irq() may return signed unnoticed [ARM] Feroceon: Feroceon-specific WA-cache compatible {copy,clear}_user_page() [ARM] Feroceon: fix function alignment in proc-feroceon.S [ARM] Orion: catch a couple more alternative spellings of PCIe [ARM] Orion: fix orion-ehci platform resource end addresses [ARM] Orion: fix ->map_irq() PCIe bus number check [ARM] Orion: fix ioremap() optimization [ARM] feroceon: remove CONFIG_CPU_CACHE_ROUND_ROBIN check [ARM] feroceon: remove CONFIG_CPU_DCACHE_WRITETHROUGH check kprobes/arm: fix decoding of arithmetic immediate instructions kprobes/arm: fix cache flush address for instruction stub [ARM] 5022/1: Race in ARM MMCI PL18x driver, V2 [ARM] 5021/1: at91: buildfix for sam9263 + PM [ARM] 5018/1: RealView: Fix the ARM11MPCore Oprofile compilation [ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263 [ARM] 5017/1: pxa3xx: Report unsupported wakeup sources in pxa3xx_set_wake() [ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info [ARM] 5014/1: Cleanup reset state before entering suspend or resetting. ...
2008-04-29i2c: Convert most new-style drivers to use module aliasingJean Delvare
Based on earlier work by Jon Smirl and Jochen Friedrich. Update most new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. I've left the video drivers apart (except for SoC camera drivers) as they're a bit more diffcult to deal with, they'll have their own patch later. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Jochen Friedrich <jochen@scram.de>
2008-04-28[ARM] 5021/1: at91: buildfix for sam9263 + PMDavid Brownell
Build fix for power management on at91sam9263: it has two memory controllers instead of just one, so it might have two banks of DRAM to put into selfrefresh mode. For now we continue to assume only the first bank is populated. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-28[ARM] 5016/1: AT91: typo in mci configuration for at91cap at91sam9263Nicolas Ferre
typo in mci configuration in devices files Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-28atmel_lcdfb: don't initialize a pre-allocated framebufferHaavard Skinnemoen
If the user specified a fixed framebuffer address on the command line, it may have been initialized already with a splash image or something, so we shouldn't clear it. Therefore, we should only initialize the framebuffer if we allocated it ourselves. This patch also updates the AVR32 setup code to clear the framebuffer if it allocated it itself, i.e. the user didn't provide a fixed address or the reservation failed. I've updated the at91 platform code as well so that it initializes the framebuffer if it is located in SRAM, but I haven't tested that it actually works. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Nicolas FERRE <nicolas.ferre@rfo.atmel.com> Cc: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-21Merge branch 'semaphore' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc * 'semaphore' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: Deprecate the asm/semaphore.h files in feature-removal-schedule. Convert asm/semaphore.h users to linux/semaphore.h security: Remove unnecessary inclusions of asm/semaphore.h lib: Remove unnecessary inclusions of asm/semaphore.h kernel: Remove unnecessary inclusions of asm/semaphore.h include: Remove unnecessary inclusions of asm/semaphore.h fs: Remove unnecessary inclusions of asm/semaphore.h drivers: Remove unnecessary inclusions of asm/semaphore.h net: Remove unnecessary inclusions of asm/semaphore.h arch: Remove unnecessary inclusions of asm/semaphore.h
2008-04-18arch: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-17[ARM] 4989/1: [AT91] SAM9 ClockSource / ClockEventsAndrew Victor
Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4982/1: [AT91] Drop old-style UART initialization (Part 1)Andrew Victor
All the SAM9 boards supported by mainline and the AT91 patches have been converted to the new-style UART initialization. Therefore drop support for the old at91_init_serial() interface for SAM9. at91_uarts[] array can also be marked as __initdata. The warning that no serial-console is defined moved from at91_set_serial_console() to at91_add_device_serial() since the whole point is the board-specific file is not calling at91_set_serial_console(). Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4980/1: [AT91] emQbit ECB_AT91 board supportAndrew Victor
Support for the emQbit ECB_AT91 board. <http://wiki.emqbit.com/free-ecb-at91> Original patch from Nelson Castillo. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4979/1: [AT91] Olimex SAM9-L9260 board supportAndrew Victor
Support for the Olimex SAM9-L9260 board. <http://www.olimex.com/dev/sam9-L9260.html> Original patch from Ivan Vasilev. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17[ARM] 4978/1: [AT91] KB9260 (CAM60) board supportAndrew Victor
Support for the Kwikbyte KB9260 (CAM60) board. <http://www.kwikbyte.com/KB9260.html> Original patch from Kwikbyte. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-10[ARM] 4938/1: [CSB637] Convert heartbeat LED to gpio-ledsBill Gatliff
Converts the D1/PB2 LED to use the gpio-leds API and heartbeat trigger. Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-10[ARM] 4937/1: [CSB637] Convert to new-style UART initializationBill Gatliff
Converts the CSB637 to the new-style UART initialization API. Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-10[ARM] 4936/1: [CSB337] Converts to new-style UART initializationBill Gatliff
Converts the CSB337 target to the new UART initialization API. Signed-off-by: Bill Gatliff <bgat@billgatliff.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04[ARM] 4911/1: [AT91] LEDs on SAM9260-EK and SAM9261-EK boardsAndrew Victor
Add support for the GPIO-driven LEDs (using NEW_LEDS) on the Atmel SAM9260-EK and SAM9261-EK boards. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04[ARM] 4910/1: [AT91] AT73C213 audio on SAM9260-EK and SAM9261-EK boardsAndrew Victor
Add support for AT73C213 audio DAC on the Atmel SAM9260-EK and SAM9261-EK boards. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04[ARM] 4909/1: [AT91] Timer/Counter Block platform_devicesAndrew Victor
Register platform_devices for the Timer/Counter Block peripherals found on the AT91RM9200, SAM9 & CAP9 processors. Original patch from David Brownell. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04[ARM] 4908/1: [AT91] RTT platform_device fixAndrew Victor
The RTT-as-RTC driver will search for the user-specified RTT peripheral via ID number (0 .. 1). Therefore if the processor only contains a single RTT peripheral, we need to set its platform_device.id to "0" instead of "-1". Also add the missing platform_device resource for the CAP9 processor. Bug reported by Sedji Gaouaou. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04[ARM] 4907/1: [AT91] SAM9/CAP9 reset reasonAndrew Victor
The Reset controller on the SAM9/CAP9 processors will store the reason for the last system reset. On startup, display this information (wakeup signal, RTT alarm, watchdog reset, user reset, etc) Based on patch from David Brownell. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04[ARM] 4906/1: [AT91] SAM9/CAP9 basic power-managementAndrew Victor
Basic power-management (suspend-to-ram) support for Atmel SAM9 and CAP9 processors. Based on comments & patches from Anti Sullin and David Brownell. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04[ARM] 4905/1: [AT91] Atmel SAM9 boards updated to new-style UART initializationAndrew Victor
Convert the Atmel SAM9260-EK, SAM9261-EK, SAM9263-EK and SAM9RL-EK boards to use the new-style UART initialization. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04[ARM] 4904/1: [AT91] Pass ECC controller to NAND driverAndrew Victor
On AT91 processors that include an ECC controller, pass its base address to the NAND driver via platform_device resources. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04[ARM] 4903/1: [AT91] SAM9/CAP9 system shutdownAndrew Victor
Enable system shutdown/power-off on AT91SAM9 and AT91CAP9 based boards. This does not require power-management to be enabled, and the pm_power_off method can be overridden in board-specific files if necessary. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-04[ARM] 4902/1: [AT91] SAM9/CAP9 memory controller headerAndrew Victor
The AT91CAP9 processor includes the same Static Memory Controller (SMC) peripheral as the SAM9 processors, but replaces the SDRAM Controller with a DDR/SDR Controller (DDRSDRC). This patch splits the existing include/asm-arm/arch-at91/at91sam926x_mc.h into at91sam9_sdramc.h and at91sam9_smc.h. It also adds an at91cap9_ddrsdr.h for the DDRSDRC controller. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-28[ARM] 4825/1: adds support for YL9200 boardSteve Birtles
1. Configuration file for YL9200 2. Board file fro YL9200 Adds support for the UCdragon YL9200 board available widly in China Signed-off-by: steve birtles <arm_kernel_development@micromark.net.cn> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-06[ARM] AT91: correct at91sam9263ek LCD power gpio pinNicolas Ferre
Correct GPIO pin assignment for the LCD power control (PCI) Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: David Brownell <david-b@pacbell.net> Cc: Andrew Victor <linux@maxim.org.za> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-06[ARM] 4848/1: at91: remove false lockdep warningsDavid Brownell
Remove false lockdep warnings about lock recursion when declaring IRQs as being wake-capable, by marking putting GPIO irq_desc locks into their own class. (Thanks to Peter Zijlstra for helping track down such a small fix to this problem.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-09[ARM] 4823/1: AT91 section fixDavid Brownell
Fix section warning: WARNING: arch/arm/mach-at91/built-in.o(.text+0xd74): Section mismatch in reference from the function init_programmable_clock() to the function .init.text:at91_css_to_clk() The function init_programmable_clock() references the function __init at91_css_to_clk(). This is often because init_programmable_clock lacks a __init annotation or the annotation of at91_css_to_clk is wrong. In this case the only calls to and from init_programmable_clock() are from code marked as "__init", so this fix is trivially correct. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Uwe Kleine-Knig <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-06atmel_lcdfb: backlight controlDavid Brownell
On the sam9 EK boards, the LCD backlight is hooked up to a PWM output from the LCD controller. It's controlled by "contrast" registers though. This patch lets boards declare that they have that kind of backlight control. The driver can then export this control, letting screenblank and other operations actually take effect ... reducing the typically substantial power drain from the backlight. Note that it's not fully cooked - doesn't force backlight off during system suspend - the "power" and "blank" events may not be done right This should be easily added in the future. [nicolas.ferre@atmel.com: remove unneeded inline and rename functions] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Russell King <rmk@arm.linux.org.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04Merge branches 'at91', 'ixp', 'master', 'misc', 'pxa' and 'realview' into develRussell King
* at91: [ARM] 4802/1: Fix typo and remove vague comment [ARM] 4660/3: at91: allow selecting UART for early kernel messages [ARM] 4739/1: at91sam9263: make gpio bank C and D irqs work * ixp: [ARM] 4809/2: ixp4xx: Merge dsmg600-power.c into dsmg600-setup.c [ARM] 4808/2: ixp4xx: Merge nas100d-power.c into nas100d-setup.c [ARM] 4807/2: ixp4xx: Merge nslu2-power.c into nslu2-setup.c [ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards [ARM] 4805/1: ixp4xx: Use leds-gpio driver instead of IXP4XX-GPIO-LED driver [ARM] 4715/2: Ethernet support for IXDP425 boards [ARM] 4714/2: Headers for IXP4xx built-in Ethernet and WAN drivers [ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features [ARM] 4712/2: Adds functions to read and write IXP4xx "feature" bits [ARM] 4774/2: ixp4xx: Register dsmg600 rtc i2c_board_info [ARM] 4773/2: ixp4xx: Register nas100d rtc i2c_board_info [ARM] 4772/2: ixp4xx: Register nslu2 rtc i2c_board_info [ARM] 4769/2: ixp4xx: Button updates for the dsmg600 board [ARM] 4768/2: ixp4xx: Button and LED updates for the nas100d board [ARM] 4767/2: ixp4xx: Add bitops.h include to io.h [ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards * master: [ARM] 4810/1: - Fix 'section mismatch' building warnings [ARM] xtime_seqlock: fix more ARM machines for xtime deadlocking [ARM] 21285 serial: fix build error * misc: [ARM] 4736/1: Export atags to userspace and allow kexec to use customised atags * pxa: [ARM] 4798/1: pcm027: fix missing header file [ARM] 4803/1: pxa: fix building issue of poodle.c caused by patch 4737/1 [ARM] 4801/1: pxa: fix building issues of missing pxa2xx-regs.h [ARM] pxa: introduce sysdev for pxa3xx static memory controller [ARM] pxa: add preliminary suspend/resume code for pxa3xx [ARM] pxa: introduce sysdev for GPIO register saving/restoring [ARM] pxa: introduce sysdev for IRQ register saving/restoring [ARM] pxa: fix the warning of undeclared "struct pxaohci_platform_data" [ARM] pxa: change set_kset_name() to direct name assignment for MFP sysclass * realview: [ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option [ARM] 4821/1: RealView: Remove the platform dependencies from localtimer.c [ARM] 4820/1: RealView: Select the timer IRQ at run-time [ARM] 4819/1: RealView: Fix entry-macro.S to work with multiple platforms [ARM] 4818/1: RealView: Add core-tile detection [ARM] 4817/1: RealView: Move the AMBA resource definitions to realview_eb.c [ARM] 4816/1: RealView: Move the platform-specific definitions into board-eb.h [ARM] 4815/1: RealView: Add clockevents suport for the local timers [ARM] 4814/1: RealView: Add broadcasting clockevents support for ARM11MPCore [ARM] 4813/1: Add SMP helper functions for clockevents support [ARM] 4812/1: RealView: clockevents support for the RealView platforms [ARM] 4811/1: RealView: clocksource support for the RealView platforms
2008-02-04[ARM] 4660/3: at91: allow selecting UART for early kernel messagesGuennadi Liakhovetski
Currently early kernel messages, i.e., those from uncompression, go to the debugging UART. And if it is enabled in the platform configuration, but not initialized by the bootloader, the machine hangs, waiting for UART status change. Besides, having those messages on another UART - typically the console UART - may be preferrable. This patch allows selecting the UART in kernel configuration. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] 4739/1: at91sam9263: make gpio bank C and D irqs workDavid Brownell
On the at91sam9263, IRQs for GPIO banks C and D don't currently work. This is because banks C, D, and E share one clock and toplevel IRQ, but the AT91 code setting up and handling GPIO IRQs expects no sharing. This patch: - Fixes GPIO IRQ setup and handling to cope with GPIO banks that are shared like on sam9263 chips, by setting up a list of those banks and making the IRQ dispatching logic scan that list. - Precomputes the address of each bank's registers, saving it with other per-bank data so that it no longer needs to be constantly recomputed during IRQs and other GPIO operations. That shrinks hot-path code, while helping the GPIO bank irq updates. - Fixes a minor bug where IRQ_TYPE_NONE was wrongly rejected (it just means "use the default", which is "both edges" here). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 02:20:44 +0000