aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-ep93xx
AgeCommit message (Collapse)Author
2009-09-12Merge branch 'master' into develRussell King
2009-09-12Merge branch 'devel-stable' into develRussell King
Conflicts: MAINTAINERS arch/arm/mm/fault.c
2009-08-03ARM: 5635/1: Use DIV_ROUND_CLOSESTJulia Lawall
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30ARM: 5628/1: ep93xx: Introduce Pulse Width Modulator (PWM) driverHartley Sweeten
The EP93xx features two PWMs (one on the EP9307) with the following features: * Configurable dual output * Separate input clocks for each PWM output * 16-bit resolution * Programmable pulse width (duty cycle), interval (frequency), and polarity This adds the necessary core support as well as the driver. A sysfs interface is provided to control the PWM outputs. Signed-off-by: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-23[ARM] 5611/1: ep93xx: update ts72xx nor flash supportHartley Sweeten
Update the NOR flash support for TS-7200. The TS-7200 models all have 16-bit NOR flash. Update the platform init to support this. Remove the private TS72XX_NOR_* defines and use the common ep93xx defines for the external chip select physical base address instead. Move the NOR flash registration into a static __init function. When the NAND flash support is updated this function will also be used to register the NAND flash for the TS-7250 and TS-7260. Tested-by: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-21[ARM] 5612/1: ep93xx: add platform LEDsHartley Sweeten
The EP93xx has two gpio pins specifically assigned to drive external LEDs. Add core support for these LEDs. On the EDB93xx development boards, the rdled is connected to an external reset circuit. Turning this led on for an extended amount of time will cause the circuit to issue a manual reset. Refer to Cirrus App Note AN258 for more information. http://www.cirrus.com/en/pubs/appNote/AN258REV2.pdf This led can be safely used as the system heartbeat with the ledtrig-heartbeat driver. echo heartbeat > /sys/class/leds/platform:rdled/trigger The grled can be used for any desired purpose. Tested-by: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-17[ARM] 5609/1: ep93xx: add register defines for keypad supportHartley Sweeten
Add missing register defines for ep93xx keypad clock support. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-17[ARM] 5607/1: ep93xx: Use __iomem pointer on syscon write functionRyan Mallon
Change the reg argument of the ep93xx_syscon_swlocked_write function to be an __iomem pointer. Fixes a number of build warnings. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-17[ARM] 5605/1: Fix ep93xx gpio.c headersRyan Mallon
Fix a number of build errors in ep93xx gpio.c due to to missing irq.h Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-17[ARM] 5600/1: ep93xx: core.c remove cast when copying dev_addrHartley Sweeten
The MAC address for the ep93xx ethernet driver can be optionally copied from registers in the controller when booting. Due to [ARM] 5573/1: ep93xx: ensure typesafe io, the cast for the source address is no longer needed. EP93XX_ETHERNET_BASE is typed as a (void __iomem __force *) so memcpy_fromio() needs to be used instead of memcpy(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-11[ARM] 5598/1: ep93xx: core.c typesafe vic_initHartley Sweeten
The EP93XX_VIC{1/2}_BASE defines are now typesafe due to [ARM] 5573/1: ep93xx: ensure typesafe io. The (void *) cast is not needed when calling vic_init(). Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-09[ARM] 5593/1: ep93xx: clock.c __iomem pointerHartley Sweeten
To ensure typesafe io, the enable_reg variable should be a void __iomem pointer not u32. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-09[ARM] 5592/1: ep93xx: cleanup platform header includesHartley Sweeten
arch/arm/mach-ep93xx/include/mach/hardware.h 1. Properly name the include files so that they are loaded from the <mach/*> directory and not the local directory. 2. Remove including the ts72xx.h header. This header is not generic to the ep93xx platform. It should only be included by the ts72xx specific files that require it. The only two users in the tree are arch/arm/mach-ep93xx/ts72xx.c and drivers/mtd/nand/ts7250.c. arch/arm/mach-ep93xx/include/mach/ts72xx.h 1. <linux/io.h> should already be included by any user of this header. Doing the include here hides it from being needed by the calling source file. arch/arm/mach-ep93xx/core.c 1. Remove unnecessary headers. They were probably included originally due to cut-and-paste from other files. 2. <linux/io.h> should be included not <mach/gpio.h> arch/arm/mach-ep93xx/adsphere.c arch/arm/mach-ep93xx/edb93xx.c arch/arm/mach-ep93xx/gesbc9312.c arch/arm/mach-ep93xx/micro9.c arch/arm/mach-ep93xx/ts72xx.c 1. Remove unnecessary headers. arch/arm/mach-ep93xx/ts72xx.c 1. Remove unnecessary headers. 2. Add platform specific header <mach/ts72xx.h>. drivers/mtd/nand/ts7250.c 1. <linux/io.h> should be included not <asm/io.h>. 2. Add platform specific header <mach/ts72xx.h>. Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-09[ARM] 5595/1: ep93xx: missing header in dma-m2p.cHartley Sweeten
<linux/io.h> was getting included by <mach/ts72xx.h>, is should be included by this file. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-09[ARM] 5578/1: ep93xx: add ep93xx-keypad clockHartley Sweeten
Add clkdev support for the ep93xx_keypad driver. A matrix keypad driver for the ep93xx just got merged via the input subsystem group. For this driver to work the keypad clock needs to be added to the ep93xx clkdev support. In order to accomplish this the following changes are implemented: 1) Move the EP93XX_EXT_*_RATE defines to mach/include/hardware.h. 2) Add EP93XX_KEYTCHCLK_DIV{4/16} for the keypad driver. 3) Add support for programmable clocks (set_rate() callback). 4) Add clk_keypad for the keypad driver. 5) tab indent the clk_lookup table for easier reading. 6) Add the set_rate() callback to program the keypad clock. This callback is generalized since the ADC clock (touchscreen) can use the same callback. 7) Use the ep93xx_syscon_swlocked_write() core function for updating the software locked register. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-09[ARM] 5577/2: ep93xx: syscon locked register functionsHartley Sweeten
Add core functions to handle writes to the ep93xx software locked registers. There are a number of registers in the EP93xx System Controller that require a write to the software lock register before they can be updated. This patch adds a number of exported functions to the ep93xx core that handle this access. The software locked clock divider registers, VidClkDiv, MIRClkDiv, I2SClkDiv and KeyTchClkDiv would typically involve writing a specific value to the register. To support this the ep93xx_syscon_swlocked_write() function is provided. For the DeviceCfg register it's more typical to only need to set or clear a single bit. A generic ep93xx_devcfg_set_clear() function is provided to handle both operations. Two inline functions, ep93xx_devcfg_set_bits() and ep93xx_devcfg_clear_bits() are also provided to improve code readability. In addition, the remaining bits in the System Controller Device Config Register have been documented and the previously defined names shortened. All code paths that use this functionality have been updated except for arch/arm/kernel/crunch.c. That code is in a context switch path, which is not reentrant, so it is safe against itself. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-27[ARM] 5575/1: ep93xx: Show gpio interrupt type in debugfs output.Hartley Sweeten
ep93xx: Show gpio interrupt type in debugfs output. EP93xx uses a private implementation for the debugfs output. Modify this output so it includes the interrupt type when the gpio is configured as an interrupt Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-27[ARM] 5574/1: ep93xx: gpio.c: fix header includes and __iomem pointersHartley Sweeten
Fix ep93xx gpio.c header includes and __iomem pointers. 1. <linux/gpio.h> should be included instead of <asm/gpio.h> 2. <mach/hardware.h> should be included instead of <mach/ep93xx-regs.h> 3. data_reg and data_dir_reg in struct ep93xx_gpio_chip should be void __iomem pointers not unsigned int Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-27[ARM] 5573/1: ep93xx: ensure typesafe ioHartley Sweeten
ARM: ep93xx: ensure typesafe io For the ep93xx platform, all EP93XX_*_BASE defines are based on virtual addresses. Ensure that all these defines are properly typesafe for the __raw_{read/write}* macros. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: add driver for Synaptics I2C touchpad Input: synaptics - add support for reporting x/y resolution Input: ALPS - handle touchpoints buttons correctly Input: gpio-keys - change timer to workqueue Input: ads7846 - pin change interrupt support Input: add support for touchscreen on W90P910 ARM platform Input: appletouch - improve finger detection Input: wacom - clear Intuos4 wheel data when finger leaves proximity Input: ucb1400 - move static function from header into core Input: add driver for EETI touchpanels Input: ads7846 - more detailed model name in sysfs Input: ads7846 - support swapping x and y axes Input: ati_remote2 - use non-atomic bitops Input: introduce lm8323 keypad driver Input: psmouse - ESD workaround fix for OLPC XO touchpad Input: tsc2007 - make sure platform provides get_pendown_state() Input: uinput - flush all pending ff effects before destroying device Input: simplify name handling for certain input handles Input: serio - do not use deprecated dev.power.power_state Input: wacom - add support for Intuos4 tablets ...
2009-06-11[ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and ↵Matthias Kaehlcke
EP93XX_SYSCON_PWRCN ep93xx: get_uart_rate() uses the constants EP93XX_SYSCON_CLOCK_CONTROL and EP93XX_SYSCON_CLOCK_UARTBAUD, which no longer exist. Use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCNT_UARTBAUD instead Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-11Merge commit 'v2.6.30' into nextDmitry Torokhov
2009-06-10Merge branch for-rmk-devel of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2009-06-10Merge branch 'ep93xx' into develRussell King
2009-05-29[ARM] 5528/1: ep93xx: add defines for dma clock magic numbersHartley Sweeten
Update the dma clocks so that the magic numbers are named. All the dma clocks have an enable bit to turn them on/off as needed. Currently these bits are in the code as "magic" numbers. This changes all of them to named defines to improve code readability. Also, the EP93XX_SYSCON_CLOCK_CONTROL register is improperly named. In the EP93xx User's Guide this register is called PwrCnt (Power Control). All of the uses of this register are associated with the clock support so this patch also modifies the names to match the User's Guide. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-29[ARM] 5527/1: ep93xx: core.c: trivial spelling errorHartley Sweeten
Fix trivial spelling error in arch/arm/mach-ep93xx/core.c Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-29[ARM] 5526/1: ep93xx: usb driver cleanupHartley Sweeten
Cleanup the ohci-ep93xx driver. 1) Use the usb.h dbg() macro instead of pr_debug() so that the source filename is prefixed to the message and it is terminated with a linefeed. 2) Add error handling for the clk_get() call. 3) Update clkdev support so that the usb clock is matched by the dev_id instead of the con_id. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-29Merge branch 'for-next' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci into devel
2009-05-24[ARM] 5523/1: ep93xx phys offset selectionRyan Mallon
This patch adds a Kconfig option to select between ep93xx boards which boot from the SDRAM bank at 0x00000000 (SDCE3/SyncBoot) and those which boot from 0xc0000000 (SDCE0). This corrects a problem which causes invalid images to be built for boards which boot from 0xc0000000. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-16[ARM] 5509/1: ep93xx: clkdev enable UARTSHartley Sweeten
Fix the clkdev API support for the ep93xx uart clocks. The uarts available in the ep93xx have individual clock controls. The current implementation assumes that the bootloader has enabled the clocks before the kernel has booted. It also assumes that the bootloader has set the UARTBAUD bit indicating that the uarts are running off the 14.7456MHz external crystal. This fixes both issues. It also allows the uart clocks to be stopped when there are no users. Tested-by: Matthias Kaehlcke <matthias@kaehlcke.net> Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-15[ARM] 5504/1: ep93xx: Merge all edb93xx platformsHartley Sweeten
The Cirrus Logic EDB93xx development board platform init files share redundant code. The only differences are in the flash memory configuration, MACH_TYPE, and additional on-board I2C devices. This patch merges all of them into one file. Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Herbert Valerio Riedel <hvr@gnu.org> Cc: Toufeeq Hussain <toufeeq_hussain@infosys.com> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-08Merge commit 'v2.6.30-rc5' into nextDmitry Torokhov
2009-05-07[ARM] VIC: Add power management deviceBen Dooks
Add power management support to the VIC by registering each VIC as a system device to get suspend/resume events going. Since the VIC registeration is done early, we need to record the VICs in a static array which is used to add the system devices later once the initcalls are run. This means there is now a configuration value for the number of VICs in the system. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-26[ARM] 5452/1: ep93x: rtc: use ioremap'ed addressesHartley Sweeten
Update the rtc-ep93xx driver to use ioremap'ed addresses. This removes the dependency on <mach/hardware.h> and properly reports the memory addresses used by the driver in /proc/iomem. In addition, ep93xx_rtc_init() is updated to use platform_driver_probe() instead of platform_driver_register(). Also, the device_create_file() calls are now properly checked for error conditions. The created sysfs files are also now removed when the driver is removed. The version number for the driver has been bumped at the request of Alessandro Zummo. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-18Input: add matrix keypad driver for Cirrus EP93xxH Hartley Sweeten
This is a keyboard driver for the Cirrus Logic EP93xx keypad matrix peripheral. This driver is based on the pxa27x_keypad driver. [dtor@mail.ru: Plug in input_dev->keycode so keymap can be changed from userspace.] Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-15[ARM] 5451/1: ep93xx:core.c: build warning fixHartley Sweeten
Fix trivial build warning due to incompatible pointer type. ep93xx_timer_interrupt() has the wrong return type causing a warning during the build. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-19Merge branch 'master' of git://git.marvell.com/orion into develRussell King
Conflicts: arch/arm/mach-mx1/devices.c
2009-03-19[ARM] pass reboot command line to arch_reset()Russell King
OMAP wishes to pass state to the boot loader upon reboot in order to instruct it whether to wait for USB-based reflashing or not. There is already a facility to do this via the reboot() syscall, except we ignore the string passed to machine_restart(). This patch fixes things to pass this string to arch_reset(). This means that we keep the reboot mode limited to telling the kernel _how_ to perform the reboot which should be independent of what we request the boot loader to do. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-13Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into develRussell King
Conflicts: arch/arm/mach-at91/gpio.c
2009-03-05[ARM] 5419/1: ep93xx: fix build warnings about struct i2c_board_infoHartley Sweeten
Fix build warnings due to struct i2c_board_info in <mach/platform.h> Patch "5311/1: add core support for built in i2c bus" is causing 11 of 39 the build warnings with Kautobuild for ep93xx_defconfig on kernel 2.6.29-rc5-git4. This patch fixes it. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-03[ARM] 5414/2: ep93xx m2p dma coreRyan Mallon
Add m2p dma support to the ep93xx Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-27[ARM] 5413/1: Add ep93xx dma m2p clocksRyan Mallon
Add the clocks for ep93xx m2p dma engine. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19[ARM] 5405/1: ep93xx: remove unused gesbc9312.h headerHartley Sweeten
Remove the gesbc9312.h header since it is unused. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-10[ARM] 5371/1: ep93xx: add i2c device to edb9307aHartley Sweeten
Add the on-board rtc i2c device to the edb9307a platform init. The EP93xx based EDB9307A dev board has an on-board ISL1208 RTC connected to the I2C bus. Now that the core code supports the I2C bus, this patch will add support for the device. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-06arm: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-13[ARM] 5343/1: ep93xx: include linux/i2c.hHartley Sweeten
Include <linux/i2c.h> in all ep93xx platforms. Patch "5311/1: add core support for built in i2c bus" will cause build errors due to the following in arch/arm/mach-ep93xx/include/mach/platform.h: +void ep93xx_register_i2c(struct i2c_board_info *devices, int num); The i2c.h header needs to be included in order to define struct i2c_board_info. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13[ARM] 5342/1: ep93xx: platform init cleanupHartley Sweeten
Use EP93XX_*_PHYS_BASE and SZ_* defines in ep93xx platform inits. The following patch changes the flash memory hard-coded resource addresses and MACHINE_START boot_params to EP93XX_*_PHYS_BASE and SZ_* defines to improve readability. Also some minor whitespace cleanup resulting from previous patches. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-01[ARM] 5324/2: ep93xx: support gpio interrupt debounceHartley Sweeten
Add debounce support for ep93xx gpio interrupts. On the EP93xx, GPIO ports A, B, and F can be used to generate interrupts. For each port, if interrupts are enabled, it is possible to debouce the input signal. Debouncing is implemented by passing the input signal through a 2-bit shift register clocked by a 128Hz clock. This patch adds a platform specific way to enable the debouce feature for these input ports. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-01[ARM] 5311/1: ep93xx: add core support for built in i2c busHartley Sweeten
Allow the ep93xx platform init code to register the built-in i2c bus. The EP93xx processor has two GPIO pins dedicated for an I2C bus. This patch registers the platform supplied i2c_board_info and the necessary platform_device information for the i2c-gpio driver to use these pins. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-01[ARM] 5309/1: ep93xx: add edb9307a platformHartley Sweeten
Add Cirrus Logic EDB9307A Dev Board to arch/arm/mach-ep93xx Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>