aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-iop33x
AgeCommit message (Collapse)Author
2009-08-18iop3xx: ATU and PCI memory configuration correctedAaro Koskinen
There are two 64 MB outbound memory windows at bus addresses 0x80000000..0x83ffffff and 0x84000000..0x87ffffff for PCI memory. Currently, on iop32x, only the lower window is available for allocations, limiting the available space to 64 MB. On iop33x the full 128 MB can be allocated, but the translation value is wrong for the upper window. The patch enables the full 128 MB space on iop32x and corrects the initialization of OMWTVR1. Redundant definitions are deleted. Tested using a Thecus N2100 board with a graphics adapter in the expansion slot. Both windows are in use: 00:05.0 VGA compatible controller: XGI Technology Inc. (eXtreme Graphics Innovation) Volari Z7 (prog-if 00 [VGA controller]) [...] Region 0: Memory at 80000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at 84080000 (32-bit, non-prefetchable) [size=256K] Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Lennert Buytenhek <kernel@wantstofly.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-03-19[ARM] pass reboot command line to arch_reset()Russell King
OMAP wishes to pass state to the boot loader upon reboot in order to instruct it whether to wait for USB-based reflashing or not. There is already a facility to do this via the reboot() syscall, except we ignore the string passed to machine_restart(). This patch fixes things to pass this string to arch_reset(). This means that we keep the reboot mode limited to telling the kernel _how_ to perform the reboot which should be independent of what we request the boot loader to do. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-01[ARM] fix missing includes for iop33x and sa1100_irRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-29[ARM] Hide ISA DMA API when ISA_DMA_API is unsetRussell King
When ISA_DMA_API is unset, we're not implementing the ISA DMA API, so there's no point in publishing the prototypes via asm/dma.h, nor including the machine dependent parts of that API. This allows us to remove a lot of mach/dma.h files which don't contain any useful code. Unfortunately though, some platforms put their own private non-ISA definitions into mach/dma.h, so we leave these behind and fix the appropriate #include statments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28[ARM] iop3xx: avoid polluting the kernel's namespaceRussell King
Avoid unnecessarily pollution of the kernel's namespace by avoiding mach/hardware.h in mach/io.h, mach/memory.h and mach/timex.h. Include this header file where necessary. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28[ARM] remove a common set of __virt_to_bus definitionsNicolas Pitre
Let's provide an overridable default instead of having every machine class define __virt_to_bus and __bus_to_virt to the same thing. What most platforms are using is bus_addr == phys_addr so such is the default. One exception is ebsa110 which has no DMA what so ever, so the actual definition is not important except only for proper compilation. Also added a comment about the special footbridge bus translation. Let's also remove comments alluding to set_dma_addr which is not (and should not) be commonly used. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Eliminate useless includes of asm/mach-types.hRussell King
There are 43 includes of asm/mach-types.h by files that don't reference anything from that file. Remove these unnecessary includes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-03-26iop: unconditionally initialize the ATU on platforms known to be 'hosts'Dan Williams
Platforms like iq80321 and iq80331 which may be host-bus-adapters require 'iop3xx_init_atu=y' to be specified on the kernel command line. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-07-13iop3xx: surface the iop3xx DMA and AAU units to the iop-adma driverDan Williams
Adds the platform device definitions and the architecture specific support routines (i.e. register initialization and descriptor formats) for the iop-adma driver. Changelog: * add support for > 1k zero sum buffer sizes * added dma/aau platform devices to iq80321 and iq80332 setup * fixed the calculation in iop_desc_is_aligned * support xor buffer sizes larger than 16MB * fix places where software descriptors are assumed to be contiguous, only hardware descriptors are contiguous for up to a PAGE_SIZE buffer size * convert to async_tx * add interrupt support * add platform devices for 80219 boards * do not call platform register macros in driver code * remove switch() statements for compatible register offsets/layouts * change over to bitmap based capabilities * remove unnecessary ARM assembly statement * checkpatch.pl fixes * gpl v2 only correction * phys move to dma_async_tx_descriptor Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2007-05-16[ARM] 4383/1: iop: fix usage of '__init' and 'inline' in iop filesDan Williams
WARNING: arch/arm/mach-iop13xx/built-in.o - Section mismatch: reference to .init.text:iop13xx_pcie_map_irq from .text between 'iop13xx_pci_setup' (at offset 0x7fc) and 'iop13xx_map_pci_memory' While fixing this warning I also recalled Adrian Bunk's recommendation to not use inline in .c files, as 'iop13xx_map_pci_memory' is needlessly inlined. Removing 'inline' uncovered some dead code so that is cleaned up as well. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-03[ARM] 4348/4: iop3xx: Give Linux control over PCI initializationDan Williams
Currently the iop3xx platform support code assumes that RedBoot is the bootloader and has already initialized the ATU. Linux should handle this initialization for three reasons: 1/ The memory map that RedBoot sets up is not optimal (page_to_dma and virt_to_phys return different addresses). The effect of this is that using the dma mapping API for the internal bus dma units generates pci bus addresses that are incorrect for the internal bus. 2/ Not all iop platforms use RedBoot 3/ If the ATU is already initialized it indicates that the iop is an add-in card in another host, it does not own the PCI bus, and should not be re-initialized. Changelog: * rather than change nr_controllers to zero, simply do not call pci_common_init Cc: Lennert Buytenhek <kernel@wantstofly.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4187/1: iop: unify time implementation across iop32x, iop33x, and iop13xxDan Williams
* architecture specific details are handled in asm/arch/time.h * ARCH_IOP13XX now selects PLAT_IOP * as suggested by Lennert use ifdef CONFIG_XSCALE to skip the cp_wait on XSC3 Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17[ARM] 4186/1: iop: remove cp6_enable/disable routinesDan Williams
This functionality is replaced by cp6_trap Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-14[ARM] 4184/1: iop: cp6 access handler (undef_hook)Dan Williams
Enable svc access to cp6 via an undefined instruction hook. Do not enable access for usr code. This patch also makes iop13xx select PLAT_IOP, this requires a small change to drivers/i2c/busses/i2c-iop3xx.c. Per Lennert Buytenhek's note, the cp6 trap routine is moved to arch/arm/plat-iop Per Nicolas Pitre's note, the cp_wait is skipped since the latency to return to the faulting function is longer than cp_wait. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] Remove compatibility layer for ARM irqsRussell King
set_irq_chipdata -> set_irq_chip_data get_irq_chipdata -> get_irq_chip_data do_level_IRQ -> handle_level_irq do_edge_IRQ -> handle_edge_irq do_simple_IRQ -> handle_simple_irq irqdesc -> irq_desc irqchip -> irq_chip Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3832/1: iop3xx: coding style cleanupLennert Buytenhek
Since the iop32x code isn't iop321-specific, and the iop33x code isn't iop331-specfic, do a s/iop321/iop32x/ and s/iop331/iop33x/, and tidy up the code to conform to the coding style guidelines somewhat better. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3830/1: iop3xx: board support file cleanupLennert Buytenhek
Revamp the iop3xx board support: move the support code for each iop board type into its own file, start using platform serial and platform physmap flash devices, switch to a per-board time tick rate, and get rid of the ARCH_EP80219 and STEPD config options by doing the relevant checks at run time. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3829/1: iop3xx: optimise irq entry macrosLennert Buytenhek
Squeeze three instructions out of the iop32x irq demuxer, and nine out of the iop33x irq demuxer by using the hardware vector generator. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3826/1: iop3xx: remove IOP3??_IRQ_OFS irq offsetLennert Buytenhek
Get rid of the unused IOP3??_IRQ_OFS irq offset define, start IRQ numbering from zero. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3825/1: iop3xx: use cp6 enable/disable macrosLennert Buytenhek
Add CP6 enable/disable sequences to the timekeeping code and the IRQ code. As a result, we can't depend on CP6 access being enabled when we enter get_irqnr_and_base anymore, so switch the latter over to using memory-mapped accesses for now. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3823/1: iop3xx: switch iop32x/iop33x over to shared time codeLennert Buytenhek
Switch the iop32x and iop33x code over to the common time implementation, and remove the (nearly identical) iop32x and iop33x time implementations. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3821/1: iop3xx: switch iop32x/iop33x over to shared pci codeLennert Buytenhek
Switch the iop32x and iop33x code over to the common PCI implementation, and remove the (nearly identical) iop32x and iop33x PCI implementations. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3819/1: iop3xx: factor out shared i2c codeLennert Buytenhek
Move the i2c bits shared between iop32x and iop33x to plat-iop/i2c.c and include/asm-arm/hardware/iop3xx.h. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3818/1: iop3xx: introduce arch/arm/plat-iop for shared iop32x/iop33x codeLennert Buytenhek
Introduce the arch/arm/plat-iop directory, for code shared between the iop32x and iop33x, and move the common memory map setup bits there. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33xLennert Buytenhek
Split the iop3xx mach type into iop32x and iop33x -- split the config symbols, and move the code in the mach-iop3xx directory to the mach-iop32x and mach-iop33x directories. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>