aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/board-igep0020.c
AgeCommit message (Collapse)Author
2010-04-23omap3: Fix EHCI port for IGEP v2 boardEnric Balletbo i Serra
IGEP v2 uses EHCI port 1 instead of EHCI port 2. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-03-11omap3: Fix support for the LEDs connected to GPIO outputs on IGEP v2boardEnric Balletbo i Serra
Select CONFIG_LEDS_GPIO to enable IGEP v2 LED support and control of supported LEDs from userspace. Otherwise GPIO LEDs are exported as GPIO 26, 27 and 28 using the gpiolib framework. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-03-11omap2/3/4: ehci: avoid compiler error with touchbookFelipe Balbi
the early_param() call in board-omap3touchbook.c expands to: static const char __setup_str_early_touchbook_revision[] __section(.init.rodata) _aligned(1) = tbr; [...] and we have a non-const variable being added to the same section: static struct ehci_hcd_omap_platform_data ehci_pdata __section(.init.rodata); because of that, gcc generates a section type conflict which can (and actually should) be avoided by marking const every variable marked with __initconst. This patch fixes that for the ehci_hdc_omap_platform_data. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-19omap: musb: Pass board specific data from board fileMaulik Mankad
Pass board specific data for MUSB (like interface_type, mode etc) from board file by defining board specific structure. Each board file can define this structure based on its requirement and pass this information to the driver. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: David Brownell <david-b@pacbell.net> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Gupta Ajay Kumar <ajay.gupta@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-19IGEPv2: Use Red Led1 as Heartbeat if configuredJonas Zetterberg
If not configured it will be exported as normal GPIO led. Signed-off-by: Jonas Zetterberg <jozz@jozz.se> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-19IGEPv2: Added WIFI supportJonas Zetterberg
Enabled VMMC2 LDO voltage regulator on TWL4030. Added GPIO's (power down and reset) for WIFI chip. Signed-off-by: Anders Hedlund <anders.j.hedlund@gmail.com> Signed-off-by: Jonas Zetterberg <jozz@jozz.se> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-19omap3: Use timing data for omap2_init_common_hw on IGEP v2Enric Balletbo i Serra
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: Add support for flash on IGEP v2 boardEnric Balletbo i Serra
This patch adds support for flashes on IGEP v2 boards. For now only OneNAND is supported. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: Enable DSS2 for IGEP v2 boardEnric Balletbo i Serra
Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: Add platform init code for EHCI driver on IGEP v2Enric Balletbo i Serra
Add platform init code for EHCI driver on IGEP v2 Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-17omap3: Add platform data for the twl4030_codec MFD on IGEP v2Enric Balletbo i Serra
Add platform data for the twl4030_codec MFD on IGEP v2 Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Rename hsmmc symbols to reflect independence from twl4030Adrian Hunter
hsmmc.[ch] no longer has any dependency on twl4030 and variable names should be renamed to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap: Rename mmc-twl4030 files to hsmmcAdrian Hunter
mmc-twl4030.[ch] no longer has any dependency on twl4030 and should be renamed to reflect that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-15omap2/3/4: Fix omap2_map_common_io for multi-omapTony Lindgren
Fix omap2_map_common_io for multi-omap Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-16mfd: twl: fix twl4030 rename for remaining driver, board filesBalaji T K
Recent drivers/mfd/twl4030* renames to twl broke compile for various boards as the series was missing a patch to change the board-*.c files. This patch renames include twl4030.h to include twl.h and also renames twl4030_i2c_ routines. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Felipe Balbi <felipe.balbi@nokia.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Remove old mux code for 34xxTony Lindgren
Remove old mux code for 34xx Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-11omap: mux: Add new style init functions to omap3 board-*.c filesTony Lindgren
Add new style mux init functions to omap3 board-*.c files So far Beagle has been confirmed to be a CBB package, and CM-T35 a CUS package. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-25omap3: Add minimal IGEP v2 supportEnric Balletbo i Serra
The IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-30 18:00:39 +0000