aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/serial.c
AgeCommit message (Collapse)Author
2009-10-22omap4: Fix UART4 platform data on omap4Santosh Shilimkar
This patch removes the unnecessary UART4 platform which is under data is wrong because of this There is a separate platform structure for UART4 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-By: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-09-24omap: Fix 44xx compileTony Lindgren
Looks like these patches were not tested that well.. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-09-24omap: Fix compile for arch/arm/mach-omap2Tony Lindgren
Patch 941132606c7611246d2034cb7b01f9270c2d1ede split IO_ADDRESS into OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS except for the omap4 code to avoid merge conflicts with the omap4 code that was queued earlier. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-09-18Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits) OMAP clock: use debugfs_remove_recursive() for rewinding OMAP2/3/4 core: create omap_device layer OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects OMAP2/3/4: create omap_hwmod layer OMAP2/3 board-*.c files: read bootloader configuration earlier OMAP2/3/4 PRCM: add module IDLEST wait code OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm OMAP clock: associate MPU clocks with the mpu_clkdm OMAP3 clock: Fixed processing of bootarg 'mpurate' OMAP: SDRC: Add several new register definitions OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups. OMAP: PM: Added suspend target state control to debugfs for OMAP3 OMAP: PM debug: Add PRCM register dump support OMAP: PM debug: make powerdomains use PM-debug counters OMAP: PM: Add pm-debug counters OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each. OMAP: PM: Hook into PM counters OMAP: PM counter infrastructure. OMAP3: PM: fix lockdep warning caused by omap3_pm_init ...
2009-09-03Merge branch '2_6_32_for_next' of git://git.pwsan.com/linux-2.6 into for-nextTony Lindgren
2009-09-03OMAP2/3 board-*.c files: read bootloader configuration earlierPaul Walmsley
Most board-*.c files read configuration data from the bootloader in their .init_machine() function. This needs to happen earlier, at some point before omap2_init_common_hw() is called. This is because a future patch will use the bootloader serial console port information to enable the UART clocks earlier, immediately after omap2_clk_init(). This is in turn necessary since otherwise clock tree usecounts on clocks like dpll4_m2x2_ck will be bogus, which can cause the currently-active console UART clock to be disabled during boot. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-09-02ARM: OMAP4: Bypass the clock check.Santosh Shilimkar
Second reason of OMAP4 boot failure on 2.6.31.rc6, the UART platform data is not getting registered to kernel. Registration was failing because of clock check failure in omap_serial_init(). Below patch fix the same. OMAP4 clock framework patches are still getting discussed on mailing list so till then we need this. Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-02ARM: OMAP4: Fix NULL pointer dereference crash.Santosh Shilimkar
After the patch series "[PATCH 00/14] OMAP PM fixes for .31-rc" merge in 2.6.31-rc5, the kernel crashed during boot on OMAP4430. This patch fixes it by adding UART4 support and related code. Without this patch omap_serial_init() would produce " NULL pointer dereference" and kernel crashes in the bootup on OMAP4430 platform. Some more info on the merge issue can be found here. More info- http://lkml.org/lkml/2009/8/20/192 Note: While merging this patch,"IO_ADDRESS" needs to be changed to "OMAP2_IO_ADDRESS" if the Tony's below series is already merged in. http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15072.html Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-28OMAP2/3: Pass irqflags to 8250 driverVikram Pandita
Pass irqflags to 8250 driver with platform_data. At least Zoom2 has IRQF_TRIGGER_RISING requirement for the 8250 GPIO irq. This patch is dependent on 8250 driver changes getting accepted upstream: http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git;a=commit;h=7053133124d5cdf207c1168c7a0c582a18e12ea7 Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idleKalle Valo
OMAP tags are deprecrated so drop them. Drop UART config data which decides which UARTs to enable during boot. This is no longer necessary since serial core code disables clocks after inactivity. Background: with new UART idle code, all on-chip UARTs are idled using a configurable inactivity timer (default 5 seconds.) After the inactivity timer, UART clocks are disabled automatically. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS insteadTony Lindgren
Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS, and convert omap_read/write into a functions instead of a macros. Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE. In the long run, most code should use ioremap + __raw_read/write instead. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-05Merge branch 'pm-upstream/fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-stable
2009-08-05OMAP2/3/4: UART: allow in-order port traversalKevin Hilman
Use list_add_tail() when adding discovered UART ports. This is so traversal using list_for_each_entry() will traverse the list in the order they were found. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP2/3/4: UART: Allow per-UART disabling wakeup for serial portsKevin Hilman
This patch causes the OMAP uarts to honor the sysfs power/wakeup file for IOPAD wakeups. Before the OMAP was always woken up from off mode on a rs232 signal change. This patch also creates a different platform device for each serial port so that the wakeup properties can be control per port. By default, IOPAD wakeups are enabled for each UART. To disable, # echo disabled > /sys/devices/platform/serial8250.0/power/wakeup Where serial8250.0 can be replaced by .1, or .2 to control the other ports. Original idea and original patch from Russ Dill <russ.dill@gmail.com> Cc: Russ Dill <russ.dill@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP3: Fixed crash bug with serial + suspendTero Kristo
It was possible for an unhandled interrupt to occur if there was incoming serial traffic during wakeup from suspend. This was caused by the code in arch-arm/mach-omap2/serial.c keeping interrupt enabled all the time, but not acking its interrupts. Applies on top of PM branch. Use the PM begin/end hooks to ensure that the "serial idle" interrupts are disabled during the suspend path. Also, since begin/end hooks are now used, use the suspend_state that is passed in the begin hook instead of the enter hook as per the platform_suspend_ops docs. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP4: UART: cleanup special case IRQ handlingKevin Hilman
Streamline the OMAP4 special IRQ assignments by putting inside normal init loop instead of having a separate loop. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-07-28ARM: OMAP4: Add UART4 supportSyed Rafiuddin
This patch adds UART4 support on OMAP4430 development platform. Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
2009-05-28Merge branch 'omap4' into for-nextTony Lindgren
2009-05-28Merge branch 'omap3-upstream' into for-nextTony Lindgren
Conflicts: arch/arm/mach-omap2/serial.c
2009-05-28ARM: OMAP4: Add minimal support for omap4Santosh Shilimkar
This patch adds the support for OMAP4. The platform and machine specific headers and sources updated for OMAP4430 SDP platform. OMAP4430 is Texas Instrument's SOC based on ARM Cortex-A9 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and SCU for cache coherency. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28ARM: OMAP2/3: Serial: Remove arch_initcall dependencyVikram Pandita
Move platform_device_register() for serial device to omap_serial_init() There is no need to have arch_initcall() dependency in serial as already board files call the function omap_serial_init() Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-28OMAP: UART: Add sysfs interface for adjusting UART sleep timeoutJouni Hogander
This patch makes it possible to change uart sleep timeout. New sysfs entry is added (/sys/devices/platform/serial8250.<uart>/sleep_timeout) Writing zero will disable the timeout feature and prevent UART clocks from being disabled. Also default timeout is increased to 5 second to make serial console more usable. Original patch was written by Tero Kristo. Cc: Tero Kristo <Tero.Kristo@nokia.com> Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-05-28OMAP3: PM: UART: disable clocks when idle and off-mode supportKevin Hilman
This patch allows the UART clocks to be disabled when the OMAP UARTs are inactive, thus permitting the chip to hit retention in idle. After the expiration of an activity timer, each UART is allowed to disable its clocks so the system can enter retention. The activity timer is (re)activated on any UART interrupt, UART wake event or any IO pad wakeup. The actual disable of the UART clocks is done in the 'prepare_idle' hook called from the OMAP idle loop. While the activity timer is active, the smart-idle mode of the UART is also disabled. This is due to a "feature" of the UART module that after a UART wakeup, the smart-idle mode may be entered before the UART has communicated the interrupt, or upon TX, an idle mode may be entered before the TX FIFOs are emptied. Upon suspend, the 'prepare_suspend' hook cancels any pending activity timers and allows the clocks to be disabled immediately. In addition, upon disabling clocks the UART state is saved in case of an off-mode transition while clocks are off. Special thanks to Tero Kristo for the initial ideas and first versions of UART idle support, and to Jouni Hogander for extra testing and bugfixes. Tested on OMAP3 (Beagle, RX51, SDP, EVM) and OMAP2 (n810) Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-14Merge branch 'omap-all' into develRussell King
Conflicts: arch/arm/mach-omap2/gpmc.c arch/arm/mach-omap2/irq.c
2008-10-06ARM: OMAP2 Provide function to enable/disable uart clocksJouni Hogander
This patch adds common function to enable/disable omap2/3 uart clocks. Enabled uarts are passed by bootloader in atags and clocks for these enabled uarts are touched. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05[ARM] omap: fix lots of 'Using plain integer as NULL pointer'Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05[ARM] omap: Fix IO_ADDRESS() macrosRussell King
OMAP1_IO_ADDRESS(), OMAP2_IO_ADDRESS() and IO_ADDRESS() returns cookies for use with __raw_{read|write}* for accessing registers. Therefore, these macros should return (void __iomem *) cookies, not integer values. Doing this improves typechecking, and means we can find those places where, eg, DMA controllers are incorrectly given virtual addresses to DMA to, or physical addresses are thrown through a virtual to physical address translation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-08-22ARM: OMAP: Enable serial idling and wakeup featuresJuha Yrjola
Enable serial idling and wakeup features Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-10-03fix file specification in commentsUwe Zeisberger
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-23[ARM] 3391/1: use PLAT8250_DEV_PLATFORM{,1} for platform device id instead ↵Lennert Buytenhek
of 0/1 Patch from Lennert Buytenhek This patch changes iop3xx and omap2 and to use PLAT8250_DEV_PLATFORM{,1} as platform device id instead of just hardcoding 0/1 directly. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-17ARM: OMAP: 4/4 Fix clock framework to use clk_enable/disable miscTony Lindgren
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-07[ARM] Move asm/hardware/clock.h to linux/clk.hRussell King
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3145/1: OMAP 3a/5: Add support for omap24xxTony Lindgren
Patch from Tony Lindgren This patch adds support for omap24xx series of processors. The files live in arch/arm/mach-omap2, and share common files with omap15xx and omap16xx processors in arch/arm/plat-omap. Omap24xx support was originally added for 2.6.9 by TI. This code was then improved and integrated to share common code with omap15xx and omap16xx processors by various omap developers, such as Paul Mundt, Juha Yrjola, Imre Deak, Tony Lindgren, Richard Woodruff, Nishant Menon, Komal Shah et al. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>