aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2
AgeCommit message (Collapse)Author
2006-09-29[PATCH] OMAP: Update OMAP1/2 boards to give keymapsize and other pdataKomal Shah
This patch adds keymapsize, delay and debounce flag in the keypad platform data for various TI OMAP1/2 based boards like F-sample, H2, H3, Innovator, Nokia770, OSK, Perseus and H4. Signed-off-by: Komal Shah <komal_shah802003@yahoo.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-25ARM: OMAP: Sync clocks with linux-omap treeTony Lindgren
Mostly clean up CONFIG_OMAP_RESET_CLOCKS. Also includes a patch from Imre Deak to make McSPI clocks use id. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP2: Make sure peripherals can be accessed after clk_enableJuha Yrjola
Some peripherals seem to need additional delay until they can actually be accessed after enabling their FCLK and ICLK. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP2: Keep both APLLs active during bootupJuha Yrjola
Enabling and disabling the 54 MHz and 96 MHz APLLs can happen unnecessarily often during bootup. Make sure they're kept enabled during init. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Add support for forcing osc_ck onJuha Yrjola
Some boards might use the oscillator clock for powering external peripherals. Add support for making sure osc_ck stays active even when trying to go to sleep. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Remove IVA IRQ bankKomal Shah
ARM11 can't access the IVA interrupt controller from IVA slave port. From Richard Woodruff: "The 0x40000000 is an IVA-ARM7 local bus address. The IVA-INTC is NOT accessible through the IVA-L3-Slave Port. The current TRM does say this directly and indirectly in a few spots and in figures." Signed-off-by: Komal Shah <komal_shah802003@yahoo.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Add write memory barriers to OMAP2 clock codeJuha Yrjola
After adjusting clock parameters, OMAP2 CPUs need a memory barrier to make sure the changes go into effect immediately. Otherwise bad things will happen if we try to access the peripheral whose clock is just being enabled. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Fix OMAP2 clock.c typoSamuel Ortiz
A forgotten parenthesis in clock.c caused the PLL stabilization loop to not be executed correctly. Signed-off-by: Samuel Ortiz <samuel.ortiz@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP2: Dynamic allocator for GPMC memory spaceImre Deak
Add support for assigning memory regions dynamically to peripherals attached to GPMC interface. Platform specific code should now call gpmc_cs_request to get a free GPMC memory region instead of using a fixed address. Make the H4 and Apollon platform initialization use the new API. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Apollon MMC supportKyungmin Park
Apollon board MMC supports on OMAP2 TODO: We have to check MMC on H4 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Avoid sleeping during arch_resetTony Lindgren
If we call clk_get() from arch_reset we get ugly messages before reboot. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-08-01[ARM] 3739/1: genirq updates: irq_chip, add and use irq_chip.nameDavid Brownell
Patch from David Brownell ARM genirq cleanups/updates: - Start switching platforms to newer APIs * use "irq_chip" name, not "irqchip" * providing irq_chip.name - Show irq_chip.name in /proc/interrupts, like on x86. This update a bit more than half of the ARM code. The irq_chip.name values were chosen to match docs (if I have them) or be otherwise obvious ("FPGA", "CPLD", or matching the code). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02[PATCH] ARM: fixup irqflags breakage after ARM genirq mergeThomas Gleixner
The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 3541/2: workaround for PXA27x erratum E7 [ARM] nommu: provide a way for correct control register value selection [ARM] 3705/1: add supersection support to ioremap() [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency [ARM] 3703/1: Add help description for ARCH_EP80219 [ARM] 3678/1: MMC: Make OMAP MMC work [ARM] 3677/1: OMAP: Update H2 defconfig [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1 [ARM] Add section support to ioremap [ARM] Fix sa11x0 SDRAM selection [ARM] Set bit 4 on section mappings correctly depending on CPU [ARM] 3666/1: TRIZEPS4 [1/5] core ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ...
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoringTony Lindgren
Multiplexing for 24xx GPMC wait pin monitoring Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Fix GPMC compilation when DEBUG is definedJuha Yrjola
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Mux updates for external DMA and GPIOTony Lindgren
Mux updates for external DMA and GPIO. GPIO updates by Igor Stoppa. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Add initial 24xx suspend supportTony Lindgren
This patch adds support for omap24xx power domains and allows suspend to work. Please note that for some reason core power domain still does not seem to idle. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Add GPMC support for OMAP2Juha Yrjola
Implement basic support for General-Purpose Memory Controller as found on OMAP2420. Dynamic CS address space allocation still needs to be done. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Fix 32 kHz timer and modify GP timer to use GPT1Timo Teras
The dmtimer framework update broke 32 kHz timer as udelay() does not work before system timer is started (and GPT1 should not be reset). This also makes the GP timer use GPT1. This requires a fix in clock framework. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Port dmtimers to OMAP2 and implement PWM supportTimo Teras
Port dmtimer framework to OMAP2. Modify the dmtimers API to support setting of PWM configuration and prescaler. Convert 32 kHz timer and GP timer to use the dmtimer framework. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Correct two bugs in arch/arm/mach-omap2/clock.cJarkko Nikula
omap2_clk_set_rate: dif_off must use clk->rate_offset, not clk->src_off. omap2_get_src_field: for the case CM_SYSCLKOUT_SEL1, val must be 2 for 96MHz and 3 for 54MHz. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Register the 24xx McSPI deviceJuha Yrjola
Register the 24xx McSPI device as an OMAP2 platform device. The driver module and Kconfig option were merged already some time ago. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Fix gpt2_ick clock bitTony Lindgren
CM_ICLKEN1_CORE bit should be 4, not 0 as noted by Richard Woodruff. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-04-09[ARM] 3460/1: ARM: OMAP: Remove unnecessary nop_release()Tony Lindgren
Patch from Tony Lindgren Remove unnecessary omap_nop_release() as noted by RMK. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3433/1: ARM: OMAP: 8/8 Update board filesTony Lindgren
Patch from Tony Lindgren This patch syncs OMAP board support with linux-omap tree. The highlights of the patch are: - Add support for Nokia 770 by Juha Yrjola - Add support for Samsung Apollon by Kyungmin Park - Add support for Amstrad E3 videophone by Jonathan McDowell - Remove board-netstar.c board support as requested by Ladislav Michl - Do platform_device registration in board files by Komal Shah et al. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2Tony Lindgren
Patch from Tony Lindgren Update misc OMAP core code from linux-omap tree: - McBSP updates by Samuel Ortiz, Andrzej Zaborowski - Whitespace cleanups by Ladislav Michl - Other fixes by various linux-omap developers Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3430/1: ARM: OMAP: 5/8 Update PMTony Lindgren
Patch from Tony Lindgren Update OMAP PM code from linux-omap tree: - Move PM code from plat-omap to mach-omap1 and mach-omap2 by Tony Lindgren - Add minimal PM support for omap24xx by Tony Lindgren and Richard Woodruff - Misc updates to omap1 PM code by Tuukka Tikkanen et al - Updates to the SRAM code needed for PM and FB by Imre Deak Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3428/1: ARM: OMAP: 3/8 Update pin multiplexingTony Lindgren
Patch from Tony Lindgren Update OMAP pin multiplexing code from linux-omap tree. This patch adds new pin configurations by various OMAP developers, and suport for omap730 by Brian Swetland. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3426/1: ARM: OMAP: 1/8 Update clock frameworkTony Lindgren
Patch from Tony Lindgren Update OMAP clock framework from linux-omap tree. The highlights of the patch are: - Add support for omap730 clocks by Andrzej Zaborowski - Fix compile warnings by Dirk Behme - Add support for using dev id by Tony Lindgren and Komal Shah - Move memory timings and PRCM into separate files by Tony Lindgren Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-23[ARM] 3391/1: use PLAT8250_DEV_PLATFORM{,1} for platform device id instead ↵Lennert Buytenhek
of 0/1 Patch from Lennert Buytenhek This patch changes iop3xx and omap2 and to use PLAT8250_DEV_PLATFORM{,1} as platform device id instead of just hardcoding 0/1 directly. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3278/1: OMAP: 3/3 Fix low-level io init for omap2 boardsTony Lindgren
Patch from Tony Lindgren This patch fixes the low-level IO init for omap2 boards. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-17ARM: OMAP: 4/4 Fix clock framework to use clk_enable/disable miscTony Lindgren
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-17ARM: OMAP: 3/4 Fix clock framework to use clk_enable/disable for omap2Tony Lindgren
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-13[ARM] 3260/1: remove phys_ram from struct machine_desc (part 2)Nicolas Pitre
Patch from Nicolas Pitre This field is redundent since it must be equal to PHYS_OFFSET anyway. Now that no code uses it anymore, mark it deprecated and remove all initializations from the tree. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07[ARM] Move asm/hardware/clock.h to linux/clk.hRussell King
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3146/1: OMAP 3b/5: Add omap24xx clock frameworkTony Lindgren
Patch from Tony Lindgren This patch adds omap24xx specific clock code by Richard Woodruff, Nishant Menon, Tony Lindgren et al. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3145/1: OMAP 3a/5: Add support for omap24xxTony Lindgren
Patch from Tony Lindgren This patch adds support for omap24xx series of processors. The files live in arch/arm/mach-omap2, and share common files with omap15xx and omap16xx processors in arch/arm/plat-omap. Omap24xx support was originally added for 2.6.9 by TI. This code was then improved and integrated to share common code with omap15xx and omap16xx processors by various omap developers, such as Paul Mundt, Juha Yrjola, Imre Deak, Tony Lindgren, Richard Woodruff, Nishant Menon, Komal Shah et al. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 09:34:56 +0000