aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-orion5x/common.h
AgeCommit message (Collapse)Author
2008-12-20[ARM] Orion: share GPIO handling codeLennert Buytenhek
Split off Orion GPIO handling code into plat-orion/, and add support for multiple sets of (32) GPIO pins. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-10-19[ARM] Orion: instantiate the dsa switch driverLennert Buytenhek
This adds DSA switch instantiation hooks to the orion5x and the kirkwood ARM SoC platform code, and instantiates the DSA switch driver on the 88F5181L FXO RD, the 88F5181L GE RD, the 6183 AP GE RD, the Linksys WRT350n v2, and the 88F6281 RD boards. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-10-09Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King
Merge branch 'orion-devel' into devel
2008-09-25[ARM] Orion: add 88F6183 (Orion-1-90) supportLennert Buytenhek
The Orion-1-90 (88F6183) is another member of the Orion SoC family, which has a 16 bit DDR2 interface, one x1 PCIe port (configurable as Root Complex or Endpoint), one 10/100/1000 ethernet interface, one USB 2.0 port with PHY, one SPDIF/I2S interface, one SDIO interface, one TWSI interface, two UARTs, one SPI interface, a NAND controller, a crypto engine, and a 4-channel DMA engine. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-25[ARM] Orion: prepare for runtime-determined timer tick rateLennert Buytenhek
Currently, orion5x uses a hardcoded timer tick rate of 166 MHz, but the actual timer tick rate varies between different members of the SoC family (and can vary based on strap pin settings). This patch prepares for runtime determination of the timer tick rate. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-21[ARM] Orion: Fix boot crash on Kurobox ProPer Andersson
The Kurobox Pro crashes when any of the PCI controller registers are accessed. This patch adds a function to the Orion PCI handling code that board support code can call to disable enumerating the PCI bus entirely, and makes the Kurobox Pro PCI-related init code call this function. Signed-off-by: Per Andersson <avtobiff@gmail.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-08-09[ARM] Orion: Instantiate mv_xor driver for 5182Saeed Bishara
Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-30[ARM] Orion: make PCI handling code deal with Cardbus slotsLennert Buytenhek
The Cardbus connector does not have an IDSEL signal, and Cardbus cards are always the intended target of configuration transactions on their local PCI bus. This means that if the Orion's PCI bus signals are hooked up to a Cardbus slot, the same set of PCI functions will will appear 31 times, for each of the PCI device IDs 1-31 (ID 0 is the host bridge). This patch adds a function to the Orion PCI handling code that board support code can call to enable Cardbus mode. When Cardbus mode is enabled, configuration transactions on the PCI local bus are only allowed to PCI IDs 0 (host bridge) and 1 (cardbus device). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22[ARM] Orion: rework MPP handlingLennert Buytenhek
Instead of having board code poke directly into the MPP configuration registers, and separately calling orion5x_gpio_set_valid_pins() to indicate which MPP pins can be used as GPIO pins, introduce a helper function for configuring the roles of each of the MPP pins, and have that helper function handle gpio validity internally. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Acked-by: Russell King <linux@arm.linux.org.uk>
2008-06-22[ARM] Orion: move EHCI/I2C/UART peripheral init into board codeLennert Buytenhek
This patch moves initialisation of EHCI/I2C/UART platform devices from the common orion5x_init() into the board support code. The rationale behind this is that only the board support code knows whether certain peripherals have been brought out on the board, and not initialising peripherals that haven't been brought out is desirable for example: - to reduce user confusion (e.g. seeing both 'eth0' and 'eth1' appear while there is only one ethernet port on the board); and - to allow for future power savings (peripherals that have not been brought out can be clock gated off entirely). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Russell King <linux@arm.linux.org.uk>
2008-05-09[ARM] Orion: use mv643xx_eth driver mbus window handlingLennert Buytenhek
Make the Orion 5x platform code use the mbus window handling code that's in the mv643xx_eth driver, instead of programming the GigE block's mbus window registers by hand. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-04-28[ARM] Orion: fix ->map_irq() PCIe bus number checkLennert Buytenhek
The current orion5x board ->map_irq() routines check whether a given bus number lives on the PCIe controller by comparing it with the PCIe controller's primary bus number. This doesn't work in case there are multiple buses in the PCIe domain, i.e. if there exists a PCIe bridge on the primary PCIe bus. This patch adds a helper function (orion5x_pci_map_irq()) that returns the IRQ number for the given PCI device if that device has a hard-wired IRQ, or -1 otherwise, and makes each board's ->map_irq() function use this helper function. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-03-27Orion: orion -> orion5x renameLennert Buytenhek
Do a global s/orion/orion5x/ of the Orion 5x-specific bits (i.e. not the plat-orion bits.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Acked-by: Saeed Bishara <saeed@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>