aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-orion5x/common.h
AgeCommit message (Collapse)Author
2008-06-30[ARM] Orion: make PCI handling code deal with Cardbus slotsLennert Buytenhek
The Cardbus connector does not have an IDSEL signal, and Cardbus cards are always the intended target of configuration transactions on their local PCI bus. This means that if the Orion's PCI bus signals are hooked up to a Cardbus slot, the same set of PCI functions will will appear 31 times, for each of the PCI device IDs 1-31 (ID 0 is the host bridge). This patch adds a function to the Orion PCI handling code that board support code can call to enable Cardbus mode. When Cardbus mode is enabled, configuration transactions on the PCI local bus are only allowed to PCI IDs 0 (host bridge) and 1 (cardbus device). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22[ARM] Orion: rework MPP handlingLennert Buytenhek
Instead of having board code poke directly into the MPP configuration registers, and separately calling orion5x_gpio_set_valid_pins() to indicate which MPP pins can be used as GPIO pins, introduce a helper function for configuring the roles of each of the MPP pins, and have that helper function handle gpio validity internally. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Sylver Bruneau <sylver.bruneau@googlemail.com> Acked-by: Russell King <linux@arm.linux.org.uk>
2008-06-22[ARM] Orion: move EHCI/I2C/UART peripheral init into board codeLennert Buytenhek
This patch moves initialisation of EHCI/I2C/UART platform devices from the common orion5x_init() into the board support code. The rationale behind this is that only the board support code knows whether certain peripherals have been brought out on the board, and not initialising peripherals that haven't been brought out is desirable for example: - to reduce user confusion (e.g. seeing both 'eth0' and 'eth1' appear while there is only one ethernet port on the board); and - to allow for future power savings (peripherals that have not been brought out can be clock gated off entirely). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Acked-by: Russell King <linux@arm.linux.org.uk>
2008-05-09[ARM] Orion: use mv643xx_eth driver mbus window handlingLennert Buytenhek
Make the Orion 5x platform code use the mbus window handling code that's in the mv643xx_eth driver, instead of programming the GigE block's mbus window registers by hand. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-04-28[ARM] Orion: fix ->map_irq() PCIe bus number checkLennert Buytenhek
The current orion5x board ->map_irq() routines check whether a given bus number lives on the PCIe controller by comparing it with the PCIe controller's primary bus number. This doesn't work in case there are multiple buses in the PCIe domain, i.e. if there exists a PCIe bridge on the primary PCIe bus. This patch adds a helper function (orion5x_pci_map_irq()) that returns the IRQ number for the given PCI device if that device has a hard-wired IRQ, or -1 otherwise, and makes each board's ->map_irq() function use this helper function. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-03-27Orion: orion -> orion5x renameLennert Buytenhek
Do a global s/orion/orion5x/ of the Orion 5x-specific bits (i.e. not the plat-orion bits.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Reviewed-by: Tzachi Perelstein <tzachi@marvell.com> Acked-by: Saeed Bishara <saeed@marvell.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>