aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/Kconfig
AgeCommit message (Collapse)Author
2009-09-10[ARM] pxa: balloon3 (http://balloonboard.org/) base machine supportJonathan McDowell
So, again against latest pxa-linux-2.6/devel, with the following changes: * Move to __raw_readl/__raw_writel for FPGA/CPLD register access * Change Toppoly LCD config to be selectable at run time rather than compile time. * Remove currently unused irq device suspend/resume functions. * Strip out unnecessary/duplicated #includes. * Some code style cleanups. Balloon3 (http://balloonboard.org/) base machine support Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: add support for the IskraTel XCEP boardMatej Kenda
Added support for the Iskratel XCEP single board computer, embedded in instruments used in particle accelerators. The patch contains the platform specific code, Makefile and Kconfig changes for platform arm-pxa. Signed-off-by: Aleš Bardorfer <ales.bardorfer@i-tech.si> Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk> Signed-off-by: Matej Kenda <matej.kenda@i-tech.si> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: Palm Tungsten|C initial supportMarek Vasut
This patch adds basic support for Palm Tungsten|C handheld. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa/ezx: set IRQ_BOARD_END for EZXDaniel Ribeiro
Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-09-10[ARM] pxa: add cpu_is_pxa950() and Kconfig optionsHaojian Zhuang
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-16[ARM] pxa/treo680: initial supportTomas 'Sleep_Walker' Cech
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-11[ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specificDmitry Eremin-Solenikov
collie_pm was the only non-PXA user of sharpsl_pm. Now as it's gone we can merge code into one single file to allow further cleanup. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: Stargate 2 board supportJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: add basic support for HP iPAQ hx4700 PDAsPhilipp Zabel
This includes - IrDA (pxafixp_ir), - Buttons (gpio-keys), - ASIC3 IRQ/GPIOs (asic3), - EGPIOs (htc-egpio), - ATI Imageon w3220 framebuffer (w100fb), - Backlight (pwm-backlight), - StrataFlash (physmap), - Battery monitor (ds1wm,w1_ds2760,ds2760_battery) - USB gadget support (pxa27x_udc,gpio_vbus). - bq24022 battery charger (pda_power,bq24022) - TSC2046 touchscreen (ads7846) Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: allow IRQ_BOARD_END to be customized and make zylonite to use itPhilipp Zabel
The default value is 16 IRQs. Zylonite needs 32, ASIC3 based boards need 70. My problem is still that due to the way IRQ_GPIO is hardcoded, ASIC3 based boards need 70 IRQs starting at IRQ_BOARD_START. If I define ASIC3 IRQs similar to LoCoMo or SA1111, things break as soon as something selects PXA_HAVE_BOARD_IRQS. Increasing the default number of board IRQs to 70 instead doesn't seem very nice. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: build pwm.c according to HAVE_PWM instead of PXA_PWMEric Miao
The PXA_PWM config option is really redundant since the introduction of HAVE_PWM, replace that with HAVE_PWM to avoid confusion. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-03[ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930".Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-04[ARM] pxa: Palm Tungsten E2 basic supportMarek Vasut
This contains support for keypad, MMC, AC97, LCD and backlight. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Colibri PXA320 module basicsDaniel Mack
This adds basic support for Colibri PXA320 modules. The file colibri-320.c only contains settings specific to this module, such as the Ethernet interface. Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: Refactor Colibri board support codeDaniel Mack
- Move common function for all Colibri PXA3xx boards to the newly added colibri-pxa3xx.c - Drop some unnecessary defines from colibri.h - Make Kconfig reflect the fact that code for colibri 300 module does also work for the 310 model - Give up on the huge pin config table which was messed up with lots of #ifdefs and switch over to locally defined tables for configured functions Cc: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: add basic support for Colibri PXA300 moduleDaniel Mack
This patch add basic support for Toradex' Colibri PXA300 module. Ethernet is enabled conditionally, depdending on CONFIG_AX88796. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-23[ARM] pxa: rename colibri.c to colibri-pxa270.cDaniel Mack
Namespace cleanup: rename colibri.c to colibri-pxa270.c and change some names in colibri.h. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13[ARM] pxa: add support for CSB701 baseboardDmitry Eremin-Solenikov
CSB701 is one of baseboards that can be used with CSB726 SOM. This currently adds support for button and LED on the board. More to come later. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-13[ARM] pxa: add initial support for Cogent CSB726 boardDmitry Eremin-Solenikov
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-09[ARM] pxa/magician: select PXA_SSP for touchscreen and soundPhilipp Zabel
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-02-10[ARM] 5355/1: Adding support for the HTC Himalaya and its framebufferZbynek Michl
Patch adds support for the HTC Himalaya device. It includes hardware definitions and w100fb support. Signed-off-by: Zbynek Michl <Zbynek.Michl@seznam.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-10[ARM] 5354/1: mach-pxa: add AM300 platform driver v3Jaya Kumar
This patch adds support for the AM300 platform driver which uses the E-Ink broadsheetfb display driver. Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-02[ARM] pxa: add eXeda platform supportMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-21[ARM] pxa/magician: Enable backlightPhilipp Zabel
Magician uses the generic PWM backlight driver, so select HAVE_PWM. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-21[ARM] pxa: PalmLD initial supportMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-21[ARM] pxa: PalmT5 initial supportMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-23Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel Conflicts: arch/arm/mach-pxa/am200epd.c arch/arm/mach-pxa/ezx.c
2008-12-17[ARM] pxa: initial support for the Imote2 platformJonathan Cameron
Changes made as suggested by Eric Miao (including fix to map_io silly mistake!). Originally designed by Intel, now sold by Crossbow (www.xbow.com). Very little actually on board. The patch includes sensors and similar as found on commonly occurring daughter boards. Some of the drivers are not in mainline as yet as they are either part of the IIO subsystem or need a lot of work before submission. What is the position wrt to putting them in i2c board configs etc? Support for these boards has been maintained outside the kernel for a long time, but now that there is a good da9030 pmic driver available the last major hurdle no longer exists. All comments welcomed. The Imote2's big brother (stargate2) will follow once any problems with this one have been cleaned up and a few bits and bobs have been added to the da903x driver. Hopefully the cc2420 driver will get cleaned up and submitted in the not too distant future as well. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa/gumstix: fix incorrect init done by am200Jaya Kumar
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Andre Puschmann <andre.puschmann@imms.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel Conflicts: arch/arm/mach-pxa/pxa25x.c
2008-12-02[ARM] pxa: add basic support for HP iPAQ h5000Anton Vorontsov
This patch adds HP iPAQ h5000's (h5400, h5500) basic definitions. Kernel will able to boot, work via serial console, mount filesystems placed on flashes and run USB gadgets (g_ether by default). Other device drivers (frame buffer, LCD, touchscreen, backlight, bluetooth, w1/battery, ...) are depend on SAMCOP and MediaQ SoCs/MFDs, drivers to which will be submitted too, after massive cleanups. This machine will be used as "real user" for these new drivers. This is an updated version of the patch, which contains fixes proposed on linux-arm-kernel mailing list. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Milan Plzik <milan.plzik@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa/MioA701: remove KConfig leds driver requirementRobert Jarzmik
Since mioa701 board has migrated to the mfp architecture, low power gpio setup is now correctly handled even when gpio led driver is not loaded, and leds and vibrator don't stay activated in suspend mode (especially vibrator). Remove the not needed anymore dependency. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: introduced cpu_is_pxa935() and cpu_is_pxa9xx()Eric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: add support for additional GPIOs on PXA26xEric Miao
Original patch from Marek Vasut, the problems with PXA26x are: 1. there are additional 4 GPIOs 86,87,88,89 have their direction bits inverted in GPDR2, as well as their alternate function bits being '1' for their GPIO functionality in GAFRx 2. there is no easy way to decide if the processor is a pxa26x or a pxa250/pxa255 at run-time, so the assumption here is the pxa26x will be treated as one of the pxa25x variants, and board code should have a better knowledge of the processor it is featured Introduce pxa26x_init_irq() for the second purpose, and treat the additional GPIOs > 85 on PXA25x specially. Kconfig option CONFIG_CPU_PXA26x is introduced to optimize the code a bit when PXA26x support isn't needed. Board config options have to select this to enable the support for PXA26x. __gpio_is_inverted() will be optimized way when CONFIG_CPU_PXA26x isn't selected. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-27[ARM] Arrange for platforms to select appropriate CPU supportRussell King
Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-22Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2008-10-21[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfigEric Miao
Separate building of corgi_ssp.c, and introduce a new hidden config option CONFIG_CORGI_SSP_DEPRECATED for this. Aslo mark corgi_ts.c and corgi_bl.c as deprecated. This unbreaks the legacy configs in {corgi,spitz}_defconfig, however, SPI based ADS7846 touchscreen driver and a new SPI-based corgi_lcd.c driver with integrated backlight support are recommended. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-10-17[ARM] dmabounce requires ZONE_DMARussell King
Rather than having everything that needs DMABOUNCE also select ZONE_DMA, arrange for DMABOUNCE to select it instead. This is far more sensible. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-09Merge branch 'pxa-all' into develRussell King
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/corgi.c arch/arm/mach-pxa/include/mach/hardware.h arch/arm/mach-pxa/spitz.c
2008-10-09[ARM] 5295/1: make ZONE_DMA optionalNicolas Pitre
Most ARM machines don't need a special "DMA" memory zone, and when configured out, the kernel becomes a bit smaller: | text data bss dec hex filename |3826182 102384 111700 4040266 3da64a vmlinux |3823593 101616 111700 4036909 3d992d vmlinux.nodmazone This is because the system now has only one zone total which effect is to optimize away many conditionals in page allocation paths. So let's configure this zone only on machines that need split zones. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07Merge branch 'viper-for-rmk' of git://www.misterjones.org/linux-2.6-armRussell King
Merge branch 'pxa-viper' into pxa-machines Conflicts: arch/arm/mach-pxa/Makefile drivers/pcmcia/Kconfig drivers/pcmcia/Makefile
2008-10-07Merge branch 'pxa-palm' into pxa-machinesRussell King
Conflicts: drivers/mfd/Kconfig drivers/pcmcia/Makefile
2008-10-07Merge branch 'pxa-trizeps' into pxa-machinesRussell King
Conflicts: drivers/pcmcia/Makefile
2008-10-07Merge branches 'metronomefb', 'pxa-cm2xx', 'pxa-gumstix', 'pxa-misc', ↵Russell King
'pxa-mitac', 'pxa-mp900', 'pxa-zylonite' and 'pxa-zaurus' into pxa-machines Conflicts: arch/arm/mach-pxa/poodle.c
2008-10-07[ARM] 5282/1: pxa: add CM-X255 supportMike Rapoport
Signed-off-by: Russ Dill <russ.dill@gmail.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-02[ARM] 5277/1: Add basic support for MobilePro 900/cKristoffer Ericson
This patch adds basic support for the Mobilepro 900/c mini-laptop. At present it won't do much more than build and boot. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-01[ARM] 5204/1: Trizeps4 SOM updateJürgen Schindele
- use MFP-API for GPIO - support TRIZEPS4WL module - cleanups Signed-off-by: Jrgen Schindele <linux@schindele.name> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26[ARM] 5238/2: Very basic Palm Zire 72 supportSergey Lapin
This patch contains very basic support of Palm Zire 72. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-09Basic support for the Arcom/Eurotech Viper SBC.Marc Zyngier
Signed-off-by: Marc Zyngier <marc.zyngier@altran.com>
2008-09-01[ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15Marc Zyngier
Allow PXA IRQs to be numbered starting at 16, leaving 0 to 15 for the ISA IRQs, if needed. This patch depends on RMK's PXA_HAVE_BOARD_IRQS patch. Signed-off-by: Marc Zyngier <marc.zyngier@altran.com> Acked-by: Russel King <linux@arm.linux.org.uk> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>