aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/pxa27x.c
AgeCommit message (Collapse)Author
2008-12-02Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel Conflicts: arch/arm/mach-pxa/pxa25x.c
2008-12-02[ARM] pxa: add resources for incoming rtc-pxa driverRobert Jarzmik
Add IO memory and IRQ ressources for pxa based SoC to be able to use the new rtc-pxa driver. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: register Power I2C device only when necessaryEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: move power I2C device definitions into devices.cEric Miao
Let's put these devices into a central place even if they are now processor specific, as they might be re-used in later processors. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-02[ARM] pxa: use 'pxa_last_gpio' instead of 'gpio_nr' in mfp-pxa2xx.cEric Miao
The 'gpio_nr' can really be inferred by 'pxa_last_gpio', and since we already have that variable, remove the unnecessary 'gpio_nr' now. Also, fix the incorrect GPIO number passed in pxa27x_init_irq(). Note: pxa_last_gpio should be initialized earlier, and this is true since it's been assigned in machine_desc->init_irq(). Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-11-27[ARM] pxa: convert to clkdev and match clocks by struct device where possibleRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07[ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()Eric Miao
Direct access to pxa27x specific register PSSR in a generic ohci driver is no good, introduce pxa27x_clear_otgph() and move the implementation into processor specific code. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07Merge branches 'pxa-core' and 'pxa-machines' into pxa-allRussell King
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c
2008-09-26[ARM] pxa: better MFP low power state support for pxa25x/pxa27xEric Miao
When configured as a specific low power state: MFP_LPM_DRIVE_LOW, MFP_LPM_DRIVE_HIGH, the corresponding GPDR register bit during low power mode shall be re-configured as output (if they are not configured so), thus the PGSRx bits can output. Create an additional low power values GPDR registers, and properly save/restore the GAFR + GPDR registers when doing suspend/resume. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-09[ARM] pxa: Allow platforms to override PSPR settingRussell King
Currently, we set PSPR just before entering sleep mode. However, some platforms have different requirements for setting PSPR in order to properly wake up. Set PSPR earlier in the suspend cycle so that platforms can change the setting by using a sysdev driver instead. Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-09[ARM] 5201/1: PXA3xx: Add support for power i2c busMike Rapoport
Add power I2C support for PXA3xx processors Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 Conflicts: arch/arm/mach-pxa/generic.c arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c arch/arm/mach-pxa/pxa2xx.c arch/arm/mach-pxa/pxa3xx.c arch/arm/mach-pxa/reset.c arch/arm/mach-pxa/spitz.c arch/arm/mach-pxa/tosa.c drivers/watchdog/sa1100_wdt.c
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-05[ARM] pxa: introduce reset_status and clear_reset_status for driver's usageEric Miao
Due to the problem of reset status bits being handled by different registers between pxa2xx and pxa3xx, introduce a global reset_status variable, initialized by SoC-specific code and later being used by other drivers. And also introduce clear_reset_status(), which is used to clear the corresponding status bits. Pass RESET_STATUS_ALL to clear all bits. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-07-09[ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC ↵Philipp Zabel
drivers The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform driver name changes from pxa2xx-udc to pxa25x-udc) and the platform driver name of pxa27x_udc.c is fixed to pxa27x-udc. pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors and the pxa27x_device_udc is enabled in pxa27x.c. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Nicolas Pitre <nico@cam.org> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Including from Ian Molton: Fixes for mistakes left over from the PXA2{5,7}X UDC split. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-09Merge branches 'pxa-misc', 'pxa-pwm' and 'pxa-multi' into pxaRussell King
2008-06-02[ARM] 5075/1: i2c-pxa: move i2c pin setup and PCFR_PI2CEN handling into ↵Philipp Zabel
arch/arm/mach-pxa This fixes a build error introduced when the power manager register definitions were moved into pxa2xx-regs.h. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-19[ARM] pxa: separate PXA25x and PXA27x UDC register definitionsRussell King
The PXA25x and PXA27x USB device controller register definitions are different. Currently, they live side by side in pxa-regs.h, but only one set is available depending on the setting of PXA25x or PXA27x. This means that if we build to support both PXA25x and PXA27x, the PXA27x definitions are unavailable, even to PXA27x specific code. Remove these definitions from pxa-regs.h, and place them in separate files. Include these files where appropriate. Note: according to the dependencies in drivers/usb/gadget/Kconfig, we do not support the UDC on PXA27x nor PXA3xx CPUs, so remove the platform devices from pxa27x.c and pxa3xx.c. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-19[ARM] pxa: Add PXA support for PWM APIeric miao
Patch mainly from Eric Miao, with minor edits by rmk. Note: PWM0 and PWM2 share the same register I/O space and clock gating on pxa{27x, 3xx}, thus PWM2 is treated in the driver as a child PWM of PWM0. And this is also true for PWM1/3. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-08[ARM] pxa: Fix RCSR handlingRussell King
Related to d3930614e68bdf83a120d904c039a64e9f75dba1. RCSR is only present on PXA2xx CPUs, not on PXA3xx CPUs. Therefore, we should not be unconditionally writing to RCSR from generic code. Since we now clear the RCSR status from the SoC specific PXA PM code and before reset in the arch_reset() function, the duplication in the corgi, poodle, spitz and tosa code can be removed. Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-04[ARM] 5027/1: Fixed random memory corruption on pxa suspend cycle.Robert Jarzmik
Each time a pxa type cpu went in suspend, a portion of kmalloc memory was corrupted. The issue was an incorrect length allocation introduced by the commit 711be5ccfe9a02ba560aa918a008c31ea4760163 for the save registers array (=> overflow). Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] pxa: initialise PXA devices before platform init codeRussell King
Initialise PXA devices before platform initialisation, so that platforms can parent devices to these. Acked-by: eric miao <ymiao3@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info()eric miao
also update the clk definitions in pxa27x and pxa3xx. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}eric miao
Changes include: 1. rename MFP_LPM_WAKEUP_ENABLE into MFP_LPM_CAN_WAKEUP to indicate the board capability of this pin to wakeup the system 2. add gpio_set_wake() and keypad_set_wake() to allow dynamically enable/disable wakeup from GPIOs and keypad GPIO * these functions are currently kept in mfp-pxa2xx.c due to their dependency to the MFP configuration 3. pxa2xx_mfp_config() only gives early warning if MFP_LPM_CAN_WAKEUP is set on incorrect pins So that the GPIO's wakeup capability is now decided by the following: a) processor's capability: (only those GPIOs which have dedicated bits within PWER/PRER/PFER can wakeup the system), this is initialized by pxa{25x,27x}_init_mfp() b) board design decides: - whether the pin is designed to wakeup the system (some of the GPIOs are configured as other functions, which is not intended to be a wakeup source), by OR'ing the pin config with MFP_LPM_CAN_WAKEUP - which edge the pin is designed to wakeup the system, this may depends on external peripherals/connections, which is totally board specific; this is indicated by MFP_LPM_EDGE_* c) the corresponding device's (most likely the gpio_keys.c) wakeup attribute: Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] pxa: merge assignment of set_wake into pxa_init_{irq,gpio}()eric miao
To further clean up the GPIO and IRQ structure: 1. pxa_init_irq_gpio() and pxa_init_gpio() combines into a single function pxa_init_gpio() 2. assignment of set_wake merged into pxa_init_{irq,gpio}() as an argument Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] pxa: integrate low IRQ chip (ICIP) and high IRQ chip (ICIP2) into oneeric miao
This makes the code better organized and simplified a bit. The change will lose a bit of performance when performing IRQ ack/mask/unmask,but that's not too much after checking the result binary. This patch also removes the ugly #ifdef CONFIG_PXA27x .. #endif by carefully not to access those pxa{27x,3xx} specific registers, this is done by keeping an internal IRQ number variable. The pxa-regs.h is also modified so registers for IRQ > PXA_IRQ(31) are made public even if CONFIG_PXA{27x,3xx} isn't defined (for pxa25x's sake) The incorrect assumption in the original code that internal irq starts from 0 is also corrected by comparing with PXA_IRQ(0). "struct sys_device" for the IRQ are reduced into one single device on pxa{27x,3xx}. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4831/2: Add PXA2xx AC97 clocks to clock APIMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] pxa: introduce sysdev for GPIO register saving/restoringeric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04[ARM] pxa: introduce sysdev for IRQ register saving/restoringeric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28Merge branch 'pxa-plat' into develRussell King
* pxa-plat: (53 commits) [ARM] 4762/1: Basic support for Toradex Colibri module [ARM] pxa: fix mci_init functions returning -1 [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 [ARM] 4746/1: pcm027: network support for phyCORE-PXA270 [ARM] 4745/1: pcm027: default configuration [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module [NET] smc91x: Make smc91x use IRQ resource trigger flags [ARM] pxa: add default config for littleton [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) [ARM] 4664/1: Add basic support for HTC Magician PDA phones [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. [ARM] pxa: skip registers saving/restoring if entering standby mode [ARM] pxa: fix PXA27x resume [ARM] pxa: Avoid fiddling with CKEN register on suspend [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme [ARM] pxa: Add zylonite MFP wakeup configurations [ARM] pxa: program MFPs for low power mode when suspending [ARM] pxa: make MFP configuration processor independent [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions ... Conflicts: arch/arm/mach-pxa/ssp.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-27i2c-pxa: Add polling transferMike Rapoport
Add polling I2C transfer implementation for PXA I2C. This is needed for cases where I2C transactions have to occur at times interrups are disabled. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: eric miao <eric.miao@marvell.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-26[ARM] pxa: Avoid fiddling with CKEN register on suspendRussell King
The PXA manuals indicate that when in standby or sleep modes, clocks to peripherals are shut off by the processor itself. Eg: PXA270 standby: "In standby mode, all clocks are disabled except those for the power manager and the RTC." PXA270 sleep: "In sleep mode, all clocks are disabled to the processor and to all peripherals except the RTC." PXA255 sleep: "In Sleep Mode, all processor and peripheral clocks are disabled, except the RTC." Therefore, it should be safe to leave the clock enable register alone prior to entering low power modes for these SoCs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] pxa: clean up pxa{27x,25x}_init_pm() to empty if CONFIG_PM not definederic miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] pxa: move memory controller registers into pxa2xx-regs.hRussell King
PXA3 has a different memory controller from PXA2 platforms. Avoid clashing definitions by moving the PXA2 definitions to pxa2xx-regs.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] pxa: move pxa27x_device_ohci out of pxa27x.c for use with pxa3xxeric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] pxa: add ssp devices and clk support for pxa25x/pxa27x/pxa3xxeric miao
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] pxa: avoid always registering MMC, I2C, IrDA and framebuffer devicesRussell King
Only register the MMC, framebuffer, I2C and FICP devices when the platform supplies the necessary platform data structures for the devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-26[ARM] 4652/1: pxa: fix a typo of pxa27x usb host clk definitioneric miao
CKEN_USBHOST should be used instead of CKEN_USB for usb host Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-18PM: Move definition of struct pm_ops to suspend.hRafael J. Wysocki
Move the definition of 'struct pm_ops' and related functions from <linux/pm.h> to <linux/suspend.h> . There are, at least, the following reasons to do that: * 'struct pm_ops' is specifically related to suspend and not to the power management in general. * As long as 'struct pm_ops' is defined in <linux/pm.h>, any modification of it causes the entire kernel to be recompiled, which is unnecessary and annoying. * Some suspend-related features are already defined in <linux/suspend.h>, so it is logical to move the definition of 'struct pm_ops' into there. * 'struct hibernation_ops', being the hibernation-related counterpart of 'struct pm_ops', is defined in <linux/suspend.h> . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12[ARM] 4560/1: pxa: move processor specific set_wake logic out of irq.ceric miao
a function pxa_init_irq_set_wake() was introduced, so that processor specific code could install their own version code setting PFER and PRER registers within pxa_gpio_irq_type are removed, and the edge configuration is postponed to the (*set_wake) and copies the GRER and GFER register, which will always be set up correctly by pxa_gpio_irq_type() Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: remove get_lcdclk_frequency_10khz()Russell King
get_lcdclk_frequency_10khz() is now redundant, remove it. Hide pxa27x_get_lcdclk_frequency_10khz() from public view. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: Make STUART and FICP clocks availableRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: introduce clk support for PXA SoC clocksRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: make pxa27x devices globally visibleRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12[ARM] pxa: fix naming of memory/lcd/core clock functionsRussell King
Rename pxa25x and pxa27x memory/lcd/core clock functions, and select the correct version at run time. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20[ARM] 4489/1: pxa: split pxa_cpu_suspend to processor specific onesEric Miao
1. split pxa_cpu_suspend to pxa25x_cpu_suspend and pxa27x_cpu_suspend and make pxa25x_cpu_pm_enter() and pxa27x_cpu_pm_enter() to invoke the corresponding _suspend functions, thus remove all those ugly #ifdef .. #endif out of sleep.S 2. move the declarations of those suspend functions to pm.h note: this is not a clean enough solution until all the pxa25x and pxa27x specific part is further removed out of sleep.S, sleep.S is supposed to contain generic code only Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20[ARM] 4488/1: pxa: move pxa25x/pxa27x specific code out of pm.cEric Miao
1. introduce a structure pxa_cpu_pm_fns for pxa25x/pxa27x specific operations as follows: struct pxa_cpu_pm_fns { int save_size; void (*save)(unsigned long *); void (*restore)(unsigned long *); int (*valid)(suspend_state_t state); void (*enter)(suspend_state_t state); } 2. processor specific registers saving and restoring are performed by calling the corresponding (*save) and (*restore) 3. pxa_cpu_pm_fns->save_size should be initialized to the required size for processor specific registers saving, the allocated memory address will be passed to (*save) and (*restore) memory allocation happens early in pxa_pm_init(), and save_size should be assigned prior to this (which is usually true, since pxa_pm_init() happens in device_initcall() 4. there're some redundancies for those SLEEP_SAVE_XXX and related macros, will be fixed later, one way possible is for the system devices to handle the specific registers saving and restoring Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20[ARM] 4480/1: pxa: change the pxa device naming schemeEric Miao
1. for common devices across all the pxa variants, the names are changed to be: "pxa_device_xxx" 2. for pxa25x or pxa27x specific devices, the names are changed to be: "pxa25x_device_xxx", or "pxa27x_device_xxx" Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: move platform devices to separate header fileRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>