aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa
AgeCommit message (Collapse)Author
2009-01-21[ARM] pxa: stop and disable IRQ for each DMA channels at startupEric Miao
Some broken bootloaders will leave the DMA channel state unclean, which we should really initialize correctly here. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-19[ARM] pxa: make more SSCR0 bit definitions visible on multiple processorsEric Miao
The only exclusive definitions are SSCR0_SCR and SSCR0_SerClkDiv(), loosen that exclusive #ifdef .. #else .. #endif to allow other definitions to be visible when slected multiple processors. This helps to pass the building of pxa-ssp.c. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-19[ARM] pxa: fix missing of __REG() definition for ac97 registers accessEric Miao
This currently happens for 'drivers/input/touch/mainstone-wm97xx.c'. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-19[ARM] pxa: fix NAND and MMC clock initialization for pxa3xxMike Rapoport
After commit 8c3abc7d903df492a7394b0adae4349d9a381aaf ("[ARM] pxa: convert to clkdev and match clocks by struct device where possible") get_clk in pxa3xx_nand fails with -ENOENT. Apparently, clk_get in pxamci will also fail for MCI2 on PXA310. The 'clk_find' and therefore 'clk_get' require driver to supply both 'dev_id' and 'con_id' if they are not NULL in the 'strcut clk_lookup', but neither pxa3xx_nand nor pxamci supply 'con_id'. This patch sets 'con_id' to NULL in NAND clock and MCI2 clock registration. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-01-09Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (67 commits) [MTD] [MAPS] Fix printk format warning in nettel.c [MTD] [NAND] add cmdline parsing (mtdparts=) support to cafe_nand [MTD] CFI: remove major/minor version check for command set 0x0002 [MTD] [NAND] ndfc driver [MTD] [TESTS] Fix some size_t printk format warnings [MTD] LPDDR Makefile and KConfig [MTD] LPDDR extended physmap driver to support LPDDR flash [MTD] LPDDR added new pfow_base parameter [MTD] LPDDR Command set driver [MTD] LPDDR PFOW definition [MTD] LPDDR QINFO records definitions [MTD] LPDDR qinfo probing. [MTD] [NAND] pxa3xx: convert from ns to clock ticks more accurately [MTD] [NAND] pxa3xx: fix non-page-aligned reads [MTD] [NAND] fix nandsim sched.h references [MTD] [NAND] alauda: use USB API functions rather than constants [MTD] struct device - replace bus_id with dev_name(), dev_set_name() [MTD] fix m25p80 64-bit divisions [MTD] fix dataflash 64-bit divisions [MTD] [NAND] Set the fsl elbc ECCM according the settings in bootloader. ... Fixed up trivial debug conflicts in drivers/mtd/devices/{m25p80.c,mtd_dataflash.c}
2009-01-08Merge branch 'devel'Russell King
2009-01-08[ARM] fix pxaRussell King
arch/arm/mach-pxa/pxa300.c:94: error: 'CKEN_MMC3' undeclared here (not in a function) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-08[ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, ↵Russell King
pxa, s3c arch/arm/mach-at91/at91cap9.c:337: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91rm9200.c:301: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9260.c:351: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9261.c:287: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9263.c:312: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-at91/at91sam9rl.c:304: error: 'NR_AIC_IRQS' undeclared here (not in a function) arch/arm/mach-h720x/h7202-eval.c:38: error: implicit declaration of function 'IRQ_CHAINED_GPIOB' arch/arm/mach-ks8695/devices.c:46: error: 'KS8695_IRQ_WAN_RX_STATUS' undeclared here (not in a function) arch/arm/mach-msm/devices.c:28: error: 'INT_UART1' undeclared here (not in a function) arch/arm/mach-mx2/devices.c:233: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-mx3/devices.c:128: error: 'MXC_GPIO_IRQ_START' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:140: error: 'INT_730_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:165: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap1/mcbsp.c:200: error: 'INT_McBSP1RX' undeclared here (not in a function) arch/arm/mach-omap2/board-apollon.c:286: error: implicit declaration of function 'omap_set_gpio_direction' arch/arm/mach-omap2/mcbsp.c:154: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-omap2/mcbsp.c:181: error: 'INT_24XX_MCBSP1_IRQ_RX' undeclared here (not in a function) arch/arm/mach-pxa/e350.c:36: error: 'IRQ_BOARD_START' undeclared here (not in a function) arch/arm/plat-s3c/dev-i2c0.c:32: error: 'IRQ_IIC' undeclared here (not in a function) ... Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: i8042 - add Dell Vostro 1510 to nomux list Input: gtco - use USB endpoint API Input: add support for Maple controller as a joystick Input: atkbd - broaden the Dell DMI signatures Input: HIL drivers - add MODULE_ALIAS() Input: map_to_7segment.h - convert to __inline__ for userspace Input: add support for enhanced rotary controller on pxa930 and pxa935 Input: add support for trackball on pxa930 and pxa935 Input: add da9034 touchscreen support Input: ads7846 - strict_strtoul takes unsigned long Input: make some variables and functions static Input: add tsc2007 based touchscreen driver Input: psmouse - add module parameters to control OLPC touchpad delays Input: i8042 - add Gigabyte M912 netbook to noloop exception table Input: atkbd - Samsung NC10 key repeat fix Input: atkbd - add keyboard quirk for HP Pavilion ZV6100 laptop Input: libps2 - handle 0xfc responses from devices Input: add support for Wacom W8001 penabled serial touchscreen Input: synaptics - report multi-taps only if supported by the device Input: add joystick driver for Walkera WK-0701 RC transmitter ...
2009-01-05Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: arch/arm/mach-pxa/corgi.c arch/arm/mach-pxa/poodle.c arch/arm/mach-pxa/spitz.c
2009-01-02Merge branch 'cpus4096-for-linus-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits) x86: export vector_used_by_percpu_irq x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and() sched: nominate preferred wakeup cpu, fix x86: fix lguest used_vectors breakage, -v2 x86: fix warning in arch/x86/kernel/io_apic.c sched: fix warning in kernel/sched.c sched: move test_sd_parent() to an SMP section of sched.h sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0 sched: activate active load balancing in new idle cpus sched: bias task wakeups to preferred semi-idle packages sched: nominate preferred wakeup cpu sched: favour lower logical cpu number for sched_mc balance sched: framework for sched_mc/smt_power_savings=N sched: convert BALANCE_FOR_xx_POWER to inline functions x86: use possible_cpus=NUM to extend the possible cpus allowed x86: fix cpu_mask_to_apicid_and to include cpu_online_mask x86: update io_apic.c to the new cpumask code x86: Introduce topology_core_cpumask()/topology_thread_cpumask() x86: xen: use smp_call_function_many() x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c ... Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-01Merge branch 'for_rmk' of git://git.mnementh.co.uk/linux-2.6-im into develRussell King
2008-12-31[ARM] pxa: add e750 MFP configIan Molton
Adds MFP configuration for supported e750 hardware. Signed-off-by: Ian Molton <ian@mnementh.co.uk>
2008-12-30Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits) [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices [ARM] pxafb: cleanup of the timing checking code [ARM] pxafb: cleanup of the color format manipulation code [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset [ARM] pxafb: allow video memory size to be configurable [ARM] pxa: add document on the MFP design and how to use it [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad) [ARM] pxa: Update eseries defconfig [ARM] 5352/1: add w90p910-plat config file [ARM] s3c: S3C options should depend on PLAT_S3C [ARM] mv78xx0: implement GPIO and GPIO interrupt support [ARM] Kirkwood: implement GPIO and GPIO interrupt support [ARM] Orion: share GPIO IRQ handling code [ARM] Orion: share GPIO handling code [ARM] s3c: define __io using the typesafe version [ARM] S3C64XX: Ensure CPU_V6 is selected ...
2008-12-29Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2008-12-29Input: add support for enhanced rotary controller on pxa930 and pxa935Yong Yao
Signed-off-by: Yong Yao <yaoyong@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-29Input: add support for trackball on pxa930 and pxa935Yong Yao
Signed-off-by: Yong Yao <yaoyong@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-29[ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devicesEric Miao
PXA27x and later processors support overlay1 and overlay2 on-top of the base framebuffer (although under-neath the base is also possible). They support palette and no-palette RGB formats, as well as YUV formats (only available on overlay2). These overlays have dedicated DMA channels and behave in a similar way as a framebuffer. This heavily simplified and re-structured work is based on the original pxafb_overlay.c (which is pending for mainline merge for a long time). The major problems with this pxafb_overlay.c are (if you are interested in the history): 1. heavily redundant (the control logics for overlay1 and overlay2 are actually identical except for some small operations, which are now abstracted into a 'pxafb_layer_ops' structure) 2. a lot of useless and un-tested code (two workarounds which are now fixed on mature silicons) 3. cursorfb is actually useless, hardware cursor should not be used this way, and the code was actually un-tested for a long time. The code in this patch should be self-explanatory, I tried to add minimum comments. As said, this is basically simplified, there are several things still on the pending list: 1. palette mode is un-supported and un-tested (although re-using the palette code of the base framebuffer is actually very easy now with previous clean-up patches) 2. fb_pan_display for overlay(s) is un-supported 3. the base framebuffer can actually be abstracted by 'pxafb_layer' as well, which will help further re-use of the code and keep a better and consistent structure. (This is the reason I named it 'pxafb_layer' instead of 'pxafb_overlay' or something alike) See Documentation/fb/pxafb.txt for additional usage information. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29[ARM] pxafb: cleanup of the color format manipulation codeEric Miao
1. introduce var_to_depth() to calculate the color depth including the transparency bit 2. the conversion from 'fb_var_screeninfo' to LCCR3 BPP bits can be re- used by overlays (in OVLxC1), thus an individual pxafb_var_to_bpp() has been separated out. 3. pxafb_setmode() should really set the color bitfields correctly at begining, introduce a pxafb_set_pixfmt() for this 4. allow user apps to specify color formats within fb_var_screeninfo, and checking of this in pxafb_check_var() has been simplified as below: a) pxafb_var_to_bpp() should pass - which means a basically correct bits_per_pixel and color depth setting b) the RGBT bitfields are then forced into supported values by pxafb_set_pixfmt() Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29[ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3Eric Miao
Add the palette format support for LCCR4_PAL_FOR_3, and fix the issue of LCCR4 being never assigned. Also remove the useless pxafb_set_truecolor(). Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29[ARM] pxafb: add support for FBIOPAN_DISPLAY by dma brachingEric Miao
dma branching is enabled by extending the current setup_frame_dma() function to allow a 2nd set of frame/palette dma descriptors to be used. As a result, pxafb_dma_buff.dma_desc[], pxafb_dma_buff.pal_desc[] and pxafb_info.fdadr[] are doubled. This allows maximum re-use of the current dma setup code, although the pxafb_info.fdadr[xx] for FBRx register values looks a bit odd. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29[ARM] pxafb: allow video memory size to be configurableEric Miao
The amount of video memory size is decided according to the following order: 1. <xres> x <yres> x <bits_per_pixel> by default, which is the backward compatible way 2. size specified in platform data 3. size specified in module parameter 'options' string or specified in kernel boot command line (see updated Documentation/fb/pxafb.txt) And now since the memory is allocated from system memory, the pxafb_mmap can be removed and the default fb_mmap() should be working all right. Also, since we now have introduced the 'struct pxafb_dma_buff' for DMA descriptors and palettes, the allocation can be separated cleanly. NOTE: the LCD DMA actually supports chained transfer (i.e. page-based transfers), to simplify the logic and keep the performance (with less TLB misses when accessing from memory mapped user space), the memory is allocated by alloc_pages_*() to ensures it's physical contiguous. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Eric Miao <ycmiao@ycmiao-hp520.(none)>
2008-12-29[ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constantEric Miao
As Nicolas and Russell pointed out, CLOCK_TICK_RATE is no more a constant on PXA when multiple processors and platforms are selected, change TIMER_FREQ in rtc-sa1100.c into a variable. Since the code to decide the clock tick rate is re-used from timer.c, introduce a common get_clock_tick_rate() for this. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Pitre <nico@marvell.com>
2008-12-29[ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad)Eric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-25Merge branch 'topic/asoc' into to-pushTakashi Iwai
2008-12-23Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel Conflicts: arch/arm/mach-pxa/am200epd.c arch/arm/mach-pxa/ezx.c
2008-12-17Merge branch 'mxc-pu-imxfb' of ↵Russell King
git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6 into devel
2008-12-17[ARM] pxa/littleton: add preliminary I2C board info (da9034 + max7320)Eric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa/saar: add support for the on-board smart panel LCDEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa: initial support for the Imote2 platformJonathan Cameron
Changes made as suggested by Eric Miao (including fix to map_io silly mistake!). Originally designed by Intel, now sold by Crossbow (www.xbow.com). Very little actually on board. The patch includes sensors and similar as found on commonly occurring daughter boards. Some of the drivers are not in mainline as yet as they are either part of the IIO subsystem or need a lot of work before submission. What is the position wrt to putting them in i2c board configs etc? Support for these boards has been maintained outside the kernel for a long time, but now that there is a good da9030 pmic driver available the last major hurdle no longer exists. All comments welcomed. The Imote2's big brother (stargate2) will follow once any problems with this one have been cleaned up and a few bits and bobs have been added to the da903x driver. Hopefully the cc2420 driver will get cleaned up and submitted in the not too distant future as well. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa/ezx: I2C configurationStefan Schmidt
I2C platform data setups. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa/ezx: Keypad configurationStefan Schmidt
Matrix and single key setups for all phones. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa/ezx: GPIO configurationStefan Schmidt
Pin configs for different generations and phones. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa/ezx: Remove two memory banks fixupStefan Schmidt
Our bootloader now supports ATAGS_MEM Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa/gumstix: fix incorrect init done by am200Jaya Kumar
Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Andre Puschmann <andre.puschmann@imms.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxafb: allow insertion of delay to the smart panel command sequenceEric Miao
Some smart panel requires a delay between command sequences, while PXA LCD controller didn't provide such one, let's emulate this by software. A software delay marker can be inserted into the command sequence, once pxafb_smart_queue() detects this, it flushes the previous commands and delay for a specified number of milliseconds. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxafb: allow better platform configurable smart panel timingEric Miao
For smart panels (LCD panel with internal framebuffer), the following LCCR3 register bits have different meanings than the parallel one: LCCR3_PCP - controls the L_PCLK_WR polarity LCCR3_HSP - controls the L_LCLK_A0 polarity LCCR3_VSP - controls the L_FCLK_RD polarity To keep minimum change to the original parallel timing, the .lcd_conn flags and 'pxafb_mode_info.sync' are re-used to reflect this: LCD_PCLK_EDGE_{RISE,FALL} - configures LCCR3_PCP sync & FB_SYNC_{HOR,VERT}_HIGH_ACT - configures LCCR3_{HSP,VSP} Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17[ARM] pxa: convert legacy LCD setup of other boards to new oneEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Ian Molton <spyro@f2s.com> Cc: pHilipp Zabel <philipp.zabel@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Juergen Schindele <linux@schindele.name> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Marc Zyngier <maz@misterjones.org> Acked-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Jaya Kumar <jayakumar.lkml@gmail.com>
2008-12-17[ARM] pxafb: add color TFT 8BPP LCD panel typeEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2008-12-17Merge branch 'linus' into cpus4096Ingo Molnar
2008-12-15Merge branch 'for_rmk' of git://git.mnementh.co.uk/linux-2.6-im into develRussell King
2008-12-15[ARM] pxa: Add multi-io support for e-seriesIan Molton
This patchset provides support for the TMIO based IO controller used in the Toshiba e-series PDAs. Signed-off-by: Ian Molton <spyro@f2s.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Acked-by: Eric Miao <eric.y.miao@gmail.com>
2008-12-14[ARM] move asm/xip.h's mach/hardware.h include to mach/xip.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-14[ARM] fix kernel-doc syntaxRandy Dunlap
Fix kernel-doc notation to use correct syntax. Even though this should be moved to where the function is actually implemented... Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13cpumask: convert struct clock_event_device to cpumask pointers.Rusty Russell
Impact: change calling convention of existing clock_event APIs struct clock_event_timer's cpumask field gets changed to take pointer, as does the ->broadcast function. Another single-patch change. For safety, we BUG_ON() in clockevents_register_device() if it's not set. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
2008-12-13Merge git://git.marvell.com/orion into develRussell King
2008-12-13[ARM] fix xm_x2xx_defconfig build errorsRussell King
drivers/built-in.o: In function `pci_set_consistent_dma_mask': hid-quirks.c:(.text+0x2664): multiple definition of `pci_set_consistent_dma_mask' drivers/built-in.o: In function `pci_set_dma_mask': hid-quirks.c:(.text+0x42c4): multiple definition of `pci_set_dma_mask' because drivers/pci/pci.c was not seeing the definition disabling these functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-13[ARM] 5337/1: gumstix: move am200 specific gpio pins into am200epd.Jaya Kumar
The gpio setup for AM200 specific GPIO pins should be done in the AM200 code rather than in generic gumstix code. Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-10Merge branch 'misc/mtd/sharpsl-nand' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/lumag/tosa-2.6
2008-12-02Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel Conflicts: arch/arm/mach-pxa/pxa25x.c