aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa
AgeCommit message (Collapse)Author
2009-06-18Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-06-16V4L/DVB (11607): soc-camera: add a free_bus method to struct soc_camera_linkGuennadi Liakhovetski
Currently pcm990 camera bus-width management functions request a GPIO and never free it again. With this approach the GPIO extender driver cannot be unloaded once camera drivers have been loaded, also unloading theb i2c-pxa bus driver produces errors, because the GPIO extender driver cannot unregister properly. Another problem is, that if camera drivers are once loaded before the GPIO extender driver, the platform code marks the GPIO unavailable and only a reboot helps to recover. Adding an explicit free_bus method and using it in mt9m001 and mt9v022 drivers fixes these problems. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16[ARM] pxa: register wm8731 explicitly for corgi and poodleMark Brown
The wm8731 driver has been converted to register using the standard I2C device registration mechanism so we can now do the registration in the arch/arm code as normal. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-16[ARM] pxa/mioa701: add V3 gain configuration for Maxim 1586 voltage regulatorPhilipp Zabel
Maxim 1586 V3 gain can be configured by external resistors (R24, R25) connected to the FB3 pin. To avoid accidental overvoltage, it now requires this gain to be configured explicitly. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-16[ARM] pxa/mioa701: add Maxim 1586 voltage regulatorRobert Jarzmik
On this board, the PXA272 CPU voltage VCC_CORE is provided by a Maxim 1586 voltage regulator. Use the regulator framework to provide VCC_CORE control. When cpufreq will be updated to ask for vcc_core, this will optimize power drained by the board. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-16[ARM] pxa/hx4700: add Maxim 1587A voltage regulatorPhilipp Zabel
On this board, the PXA270 CPU voltage VCC_CORE is provided by a Maxim 1587A voltage regulator configured to provide 1.55 V maximum voltage for 624 MHz operation. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-16[ARM] pxa/treo680: initial supportTomas 'Sleep_Walker' Cech
Signed-off-by: Tomáš Čech <sleep_walker@suse.cz> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-16[ARM] pxa/em-x270: fix type in SND_PXA2XX_LIB_AC97Mike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-16[ARM] pxa/em-x270: always register AC97 controller deviceMike Rapoport
After commit 6b849bcff0004aa5dd216b4d3eb56f51c9df8a72 (ASoC: Convert PXA AC97 driver to probe with the platform device) AC97 controller device should be registered explicitly for both ASoC and generic AC97 drivers Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-16[ARM] pxa/em-x270: add ability to control GPS and GPRS powerMike Rapoport
Register userspace-consumer devices to allow userspace control of voltage regulators supplying GPS and GPRS modules Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-16[ARM] pxa/em-x270: remove .gpio_cs from em_x270_libertas_pdataMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-16[ARM] pxa/palm: various fixes for PalmZ72 (mostly audio asoc and usb)Marek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-15Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/scsi/fcoe/fcoe.c net/core/drop_monitor.c net/core/net-traces.c
2009-06-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits) MAINTAINERS: EB110ATX is not ebsa110 MAINTAINERS: update Eric Miao's email address and status fb: add support of LCD display controller on pxa168/910 (base layer) [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines [ARM] 5544/1: Trust PrimeCell resource sizes [ARM] pxa/sharpsl_pm: cleanup of gpio-related code. [ARM] pxa/sharpsl_pm: drop set_irq_type calls [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific [ARM] sa1100: remove unused collie_pm.c [ARM] pxa: fix the conflicting non-static declarations of global_gpios[] [ARM] 5550/1: Add default configure file for w90p910 platform [ARM] 5549/1: Add clock api for w90p910 platform. [ARM] 5548/1: Add gpio api for w90p910 platform [ARM] 5551/1: Add multi-function pin api for w90p910 platform. [ARM] Make ARM_VIC_NR depend on ARM_VIC [ARM] 5546/1: ARM PL022 SSP/SPI driver v3 ARM: OMAP4: SMP: Update defconfig for OMAP4430 ARM: OMAP4: SMP: Enable SMP support for OMAP4430 ...
2009-06-14Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
2009-06-11[ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routinesPavel Machek
For suspend/resume to work, spitz needs pxa_pm_suspend/resume to be called. Otherwise PSPR is not set properly, and system will die during resume. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-11[ARM] pxa/sharpsl_pm: cleanup of gpio-related code.Dmitry Eremin-Solenikov
Replace calls to pxa_gpio_mode with respective gpio_request() / gpio_direction_input(). In principle these calls can be dropped as the only use of those GPIO are IRQs and IRQ code does setup GPIO correctly. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-11[ARM] pxa/sharpsl_pm: drop set_irq_type callsDmitry Eremin-Solenikov
Merge set_irq_type() into respective request_irq() calls. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-11[ARM] pxa/sharpsl_pm: merge pxa-specific code into generic oneDmitry Eremin-Solenikov
As pxa now is the only user of sharpsl_pm we can drop several startup functions into generic code thus dropping several global functions. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-11[ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specificDmitry Eremin-Solenikov
collie_pm was the only non-PXA user of sharpsl_pm. Now as it's gone we can merge code into one single file to allow further cleanup. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-11[ARM] pxa: fix the conflicting non-static declarations of global_gpios[]Eric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
2009-06-08Merge branch 'for-rmk' of git://git.marvell.com/orion into develRussell King
2009-06-05[ARM] pxa/littleton: add support for the Micro-SD slot (MMC1)Eric Miao
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-05[ARM] pxa/cm-x300: add .fixup method to enable second DRAM bankMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/cm-x300: use STUART for uncompressorMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/cm-x300: add rtc-v3020 device registrationMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/cm-x300: use OBM configuration for NAND flashMike Rapoport
CM-X300 can be assembled with different NAND flashes from different manufacturers. Adding their configuration to the kernel is impractical, therefore we will use the default NAND controller settings set up by the bootloader. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/em-x270, cm-x270: use DEEPSLEEP for PM_SUSPEND_MEMMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/em-x270: add support for on-board USB HubMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/em-x270: change power supply name to "battery"Mike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/em-x270: update libertas device setupMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/em-x270: add exeda GPIO extender and update GPIO mappingsMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/ezx: setup gpio-keys for EzX phonesAntonio Ospite
Setup gpio-keys for EzX phones Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/spitz: drop unused header files from spitz.cDmitry Eremin-Solenikov
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/imote2: add i2c board info for the wm8940 audio codecJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/imote2: add board config for SHT15 humidity sensorJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: Stargate 2 board supportJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/palm: Palm TX, T5, LD suspend-to-mem reworkMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/palm: Add Palm27x aSoC driver to PalmTE2Marek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/palm: Switch PalmT5, TX, TE2 to GPIO VBUSMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/csb726: register ac97 controllerDmitry Eremin-Solenikov
Add a call to pxa_set_ac97_info() to enable the audio support. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/csb726: switch to use smsc911x driverDmitry Eremin-Solenikov
csb726 used obsolete and not working out-of-tree driver smc911x. Switch it to use new smsc911x driver. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: add basic support for HP iPAQ hx4700 PDAsPhilipp Zabel
This includes - IrDA (pxafixp_ir), - Buttons (gpio-keys), - ASIC3 IRQ/GPIOs (asic3), - EGPIOs (htc-egpio), - ATI Imageon w3220 framebuffer (w100fb), - Backlight (pwm-backlight), - StrataFlash (physmap), - Battery monitor (ds1wm,w1_ds2760,ds2760_battery) - USB gadget support (pxa27x_udc,gpio_vbus). - bq24022 battery charger (pda_power,bq24022) - TSC2046 touchscreen (ads7846) Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/magician: use ARRAY_AND_SIZE for platform_add_devicesPhilipp Zabel
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa/magician: use I2C fast modePhilipp Zabel
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: add vcc_core regulation for cpufreq on pxa2xxRobert Jarzmik
Add voltage regulation capability to pxa2xx cpufreq driver. The cpufreq will ask for a "vcc_core" regulator to the regulator framework. If a regulator is found at probe time, it will be used with values specified in PXA270 Electrical, Mechanical, and Thermal Specifications. If not, it will be assumed for now that frequency change will work without voltage control. This assumes that the IPL/SPL installs sane values to an existing voltage regulator (ie. voltage high enough to support the full range). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: add additional mfp definitions for pxa320Jürgen Schindele
Signed-off-by: Jürgen Schindele <linux@schindele.name> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-06-05[ARM] pxa: add ability to set suspend modeMike Rapoport
PXA processors have several low-power modes. Currently kernel supports only one of these modes for PM_SUSPEND_MEM. This patch adds ability to set desired suspend mode for PXA27x based machines. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Reviewed-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: add udc support for pxa3xxRobert Jarzmik
As reported by Aric Blumer, the pxa27x_udc driver does work with pxa3xx devices. Add support into device files. Reported-by: Aric Blumer <aric@sdgsystems.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Matt Reimer <mattjreimer@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: allow IRQ_BOARD_END to be customized and make zylonite to use itPhilipp Zabel
The default value is 16 IRQs. Zylonite needs 32, ASIC3 based boards need 70. My problem is still that due to the way IRQ_GPIO is hardcoded, ASIC3 based boards need 70 IRQs starting at IRQ_BOARD_START. If I define ASIC3 IRQs similar to LoCoMo or SA1111, things break as soon as something selects PXA_HAVE_BOARD_IRQS. Increasing the default number of board IRQs to 70 instead doesn't seem very nice. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 12:25:06 +0000