aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa
AgeCommit message (Collapse)Author
2009-06-05[ARM] pxa: add udc support for pxa3xxRobert Jarzmik
As reported by Aric Blumer, the pxa27x_udc driver does work with pxa3xx devices. Add support into device files. Reported-by: Aric Blumer <aric@sdgsystems.com> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Matt Reimer <mattjreimer@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: allow IRQ_BOARD_END to be customized and make zylonite to use itPhilipp Zabel
The default value is 16 IRQs. Zylonite needs 32, ASIC3 based boards need 70. My problem is still that due to the way IRQ_GPIO is hardcoded, ASIC3 based boards need 70 IRQs starting at IRQ_BOARD_START. If I define ASIC3 IRQs similar to LoCoMo or SA1111, things break as soon as something selects PXA_HAVE_BOARD_IRQS. Increasing the default number of board IRQs to 70 instead doesn't seem very nice. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: update pxa2xx_spi_chip initialization to use .gpio_cs fieldMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: move pwm.c to common plat-pxa directoryEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: build pwm.c according to HAVE_PWM instead of PXA_PWMEric Miao
The PXA_PWM config option is really redundant since the introduction of HAVE_PWM, replace that with HAVE_PWM to avoid confusion. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: allow PWM ID base number to be specified in pwm_id_tableEric Miao
PWMs on PXA168/910 start at number 1 instead of 0, (i.e. PWM1/2/3/4 instead of PWM0/1/2/3 on PXA25x/PXA27x/PXA3xx). Allow this number to be specified in pwm_id_table. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: simplify secondary PWM handling and use platform_device_id tableEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: move mach/i2c.h to plat/i2c.hEric Miao
Signed-off-by: Paul Shen <paul.shen@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05[ARM] pxa: add platform device ID table to pxa i2c driverEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-04[ARM] 5536/1: Move clk_add_alias() to arch/arm/common/clkdev.cTony Lindgren
This can be used for other arm platforms too as discussed on the linux-arm-kernel list. Also check the return value with IS_ERR and return PTR_ERR as suggested by Russell King. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-04[ARM] pxa: fix pxa27x_udc default pullup GPIOPhilipp Zabel
Currently, pxa27x_udc tries to use GPIO 0 as D+ pullup if not explicitly configured. Default to an invalid GPIO (-1) instead. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-04[ARM] pxa/imote2: fix UCAM sensor board ADC model numberJonathan Cameron
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-03rfkill: rewriteJohannes Berg
This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-31[ARM] 5522/1: PalmLD: IDE supportMarek Vašut
Support for Palm LifeDrive's internal harddrive. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-23Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-05-22[ARM] pxa/palm: fix PalmLD/T5/TX AC97 MFPMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-20[ARM] pxa/ezx: fix pin configuration for low power modeDaniel Ribeiro
Fix LPM configuration on ezx.c Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/scsi/fcoe/fcoe.c
2009-05-18[ARM] pxa/spitz: provide spitz_ohci_exit() that unregisters USB_HOST GPIODmitry Eremin-Solenikov
Currently spitz_ohci_init() that requests GPIO doesn't have corresponding spitz_ohci_exit() which will gpio_free(). This causes minor problems e.g. during resume when the OHCI device can't be resumed. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-18[ARM] pxa: enable GPIO receivers after configuring pinsTimothy Clacy
'mach-pxa' platforms currently rely on a bootloader to setup GPIO pins and clear RDH (to enable inputs). A kernel loaded by a 'minimal' bootloader, that doesn't touch any pins, will not function correctly; inputs will remain disabled, even after the pins are configured. The following change fixes the issue and has been verified on Gumstix Verdex XL6P and a custom PXA270 platform. Signed-off-by: Timothy Clacy <tcl@phaseone.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-18[ARM] pxa: allow gpio_reset drive high during normal workDaniel Ribeiro
I want to reuse tosa/spitz gpio_reset code, but my board needs the reset gpio to be driven high during normal operation. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-18[ARM] pxa: save/restore PGSR on suspend/resume.Daniel Ribeiro
Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-16[ARM] 5513/1: Eurotech VIPER SBC: fix compilation errorRicardo Martins
Compilation for this board yields the following errors: arch/arm/mach-pxa/viper.c:511: error: 'FFUART' undeclared here (not in a function) arch/arm/mach-pxa/viper.c:520: error: 'BTUART' undeclared here (not in a function) arch/arm/mach-pxa/viper.c:529: error: 'STUART' undeclared here (not in a function) Fix them by including the necessary header. Signed-off-by: Ricardo Martins <rasm@fe.up.pt> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-05-03[ARM] Kconfig typo fix: "PXA930" -> "CPU_PXA930".Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-27[ARM] pxa/littleton: add missing da9034 touchscreen supportEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-27[ARM] pxa/zylonite: configure GPIO18/19 correctly, used by 2 GPIO expandersEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-27[ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not workingEric Miao
GPIO17_SDATA_IN_1 and GPIO36_SDATA_IN_1 are originally designed for the 2nd codec but unused on the board, yet they are initialized incorrectly by the bootloader as the SDATA_IN_1 alternate function, thus causing AC97 fail to work. Fix this issue by configuring these pins as normal GPIO to avoid the noise from these pins being treated as signals from the 2nd codec. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-27[ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNCEric Miao
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-24Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5460/1: Orion: reduce namespace pollution [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config [ARM] 5457/1: mach-imx gpio buildfix [ARM] 5456/1: add sys_preadv and sys_pwritev [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones [ARM] pxa/palm27x: General fix for Palm27x aSoC driver [ARM] pxa/mioa701: use GPIO95 as AC97 reset line [ARM] pxa: merge AC97 platform data structures [ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.h
2009-04-22rfkill: remove deprecated state constantsJohannes Berg
I only did superficial review, but these constants are stupid to have and without proper warnings nobody will review the code anyway, no amount of shouting will help. Also fix wimax to use correct states. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-21clocksource: pass clocksource to read() callbackMagnus Damm
Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-19[ARM] pxa/pcm990: start external GPIOs immediately after built-in onesGuennadi Liakhovetski
As a result of an off-by-1 error pcm990 leaves one unused GPIO number between built-in GPIOs and the pca9536 extender. Fix it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-19[ARM] pxa/palm27x: General fix for Palm27x aSoC driverMarek Vasut
Firstly, this patch makes the palm27x asoc driver a little more sane. Also, since all affected devices use GPIO95 as AC97_nRESET, this patch sets that properly. Affected are PalmT5, TX and LifeDrive. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-15[ARM] pxa/mioa701: use GPIO95 as AC97 reset lineRobert Jarzmik
MioA701 board's GPIO95 is the AC97 line. The other GPIO113 is not connected to the sound chip, but to the GSM chip as a wakeup line. It happens that when the pxa2xx_ac97 driver reconfigures the gpio as an "out gpio" for AC97 reset (bug workaround), it hangs the GSM chip. As AC97 platform data now enables to specify the AC97 reset line, use it. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-15[ARM] pxa: merge AC97 platform data structuresMark Brown
Currently there are two possible platform datas for the PXA AC97 driver: one supported by the generic AC97 driver only which provides callbacks to allow board-specific configuration at stream startup and teardown, and another for pxa2xx-ac97-lib which allows configuration of the reset GPIO for PXA2xx CPUs. Obviously this won't actually work when using the generic AC97 driver since the drivers will attempt to parse the platform data in both formats. Fix this by merging the two structures. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-14[ARM] pxa/em-x270: remove duplicated #includeHuang Weiyi
Remove duplicated #include in arch/arm/mach-pxa/em-x270.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-14[ARM] pxa/em-x270: explicitly set .gpio_cs in TDO35S SPI chip dataMike Rapoport
After commit a7bb3909b3293d503211d7f6af8ed62c1644b686 ("spi: pxa2xx_spi: introduce chipselect GPIO to simplify the common cases") the .gpio_cs field in pxa2xx_spi_chip has to be set explicitly. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-13[ARM] pxa: PalmTX and PalmT5 USB fixesMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-13[ARM] pxa: add missing declaration of pxa26x_init_irq()Marek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-09[ARM] pxa/colibri: fix missing variable name in inline functionsEric Miao
Even they are empty inline functions, the compiler still complains about the missing variable names. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: Daniel Mack <daniel@caiaq.de>
2009-04-08Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5446/1: ohci-at91: Limit vbus_pin assignment to the size of the array [ARM] 5445/1: AT91: Remove flexible array from USBH platform data [ARM] 5447/1: Add SZ_32K [ARM] omap: fix omap1 clock usecount decrement bug [ARM] pxa: register AC97 controller devices [ARM] pxa/csb701: do not register devices on non-csb726 boads [ARM] pxa/colibri: get rid of set_irq_type() [ARM] pxa/colibri: provide MAC address from ATAG_SERIAL [ARM] pxa/cm-x2xx: fix ucb1400 not being registered [ARM] pxa: Add support for suspend on PalmTX, T5 and LD [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight [ARM] pxa: Palm Tungsten E2 basic support [ARM] pxa/em-x270: add libertas device registration [ARM] pxa/magician: Enable bq24022 regulator for gpio_vbus and pda_power
2009-04-07spi: pxa2xx_spi: introduce chipselect GPIO to simplify the common casesEric Miao
Most SPI peripherals use GPIOs as their chip selects, introduce .gpio_cs for this. Signed-off-by: Eric Miao <eric.miao@marvell.com> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (53 commits) [MTD] struct device - replace bus_id with dev_name(), dev_set_name() [MTD] [NOR] Fixup for Numonyx M29W128 chips [MTD] mtdpart: Make ecc_stats more realistic. powerpc/85xx: TQM8548: Update DTS file for multi-chip support powerpc: NAND: FSL UPM: document new bindings [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays [MTD] [NAND] FSL-UPM: add multi chip support [MTD] [NOR] Add device parent info to physmap_of [MTD] [NAND] Add support for NAND on the Socrates board [MTD] [NAND] Add support for 4KiB pages. [MTD] sysfs support should not depend on CONFIG_PROC_FS [MTD] [NAND] Add parent info for CAFÉ controller [MTD] support driver model updates [MTD] driver model updates (part 2) [MTD] driver model updates [MTD] [NAND] move gen_nand's probe function to .devinit.text [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text [MTD] fix use after free in register_mtd_blktrans [MTD] [MAPS] Drop now unused sharpsl-flash map [MTD] ofpart: Check name property to determine partition nodes. ... Manually fix trivial conflict in drivers/mtd/maps/Makefile
2009-04-06Merge branch 'devel' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-04-05pxa/magician: remove deprecated .bus_shift from PASIC3 platform_dataPhilipp Zabel
The PASIC3 driver now calculates its register spacing from the resource size. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-04-04[ARM] pxa: register AC97 controller devicesMark Brown
The tosa, e740, e750, e800 and mioa701 all use AC97 audio codecs but does not register the platform device for the AC97 controller. Doing so is now required by ASoC. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04[ARM] pxa/csb701: do not register devices on non-csb726 boadsDmitry Eremin-Solenikov
csb701 driver can currently only be used on csb726 boards, limit the csb701 devices registration to csb726 board. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04[ARM] pxa/colibri: get rid of set_irq_type()Daniel Mack
In commit 47cb035560a41bd1bd3db506eeab93088815203e, the ax88796 driver learned to take IRQ flags from platform_device definition. Use that here to get rid of the set_irq_type() hack. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04[ARM] pxa/colibri: provide MAC address from ATAG_SERIALDaniel Mack
In 67fca028f1535e510689d2e444b0289e264e05c1, the ax88796 ethernet driver learned a way to let the platform data hand in the MAC address. Use it here as the original Colibri bootloader passes in a MAC address via ATAG_SERIAL. Reported-by: Matthias Meier <matthias.j.meier@gmx.net> Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04[ARM] pxa/cm-x2xx: fix ucb1400 not being registeredMarek Vasut
This patch fixes cm-x2xx not registering the ucb1400. This is because of the splitting of ucb1400 driver half year ago. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 17:51:29 +0000