aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c2410
AgeCommit message (Collapse)Author
2006-06-28[ARM] 3658/1: S3C244X: Change usb-gadget name to s3c2440-usbgadgetBen Dooks
Patch from Ben Dooks The S3C2440 and S3C2442 have an extended USB gadget controller, so re-name the platform device to inform the driver that it needs to change some parameters Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26[ARM] 3649/1: S3C24XX: Fix capitalisation of CPU on SMDK2440Ben Dooks
Patch from Ben Dooks Make CPU uppercase on the SMDK2440 KConfig entries-- Signed-off-by: Ben Dooks <ben-linux@fluff.org>Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-25[ARM] Remove MODE_(SVC|IRQ|FIQ|USR) and DEFAULT_FIQRussell King
DEFAULT_FIQ was entirely unused. MODE_* are just redefinitions of *_MODE. Use *_MODE instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3647/1: S3C24XX: add Osiris to the list of simtec pm machinesBen Dooks
Patch from Ben Dooks Enable power management for Simtec Osiris Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3645/1: S3C2412: irq support for external interruptsBen Dooks
Patch from Ben Dooks Move the decoding of the IRQ_EXT4 and above out of the entry macro, and into an chained irq handler as the EXTINT registers move depending on the CPU being used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3643/1: S3C2410: Add new usb clocksBen Dooks
Patch from Ben Dooks Make the S3C2410 use the same usb clock naming as the S3C2412 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3642/1: S3C24XX: Add machine SMDK2413Ben Dooks
Patch from Ben Dooks Add basic support for the Samsung/Aiji SMDK2413 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3641/1: S3C2412: Fixup gpio register namingBen Dooks
Patch from Ben Dooks The current S3C2412 has used to moving S3C24XX_ for the generic form of an register has been moved from the S3C2410. Fixup S3C2410_EXTINTx and S3C2410_EINFLTx to S3C24XX_EXTINTx and S3C24XX_EXTINTx Depends on Patch #3635/1, Patch #3640/1 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3640/1: S3C2412: Use S3C24XX_DCLKCON instead of S3C2410_DCLKCONBen Dooks
Patch from Ben Dooks The current S3C2412 support has moved to using S3C24XX_DCLKCON unless the specific DCLKCON is required (S3C2412_DCLKCON or S3C2410_DKCLKCON) Move the few places using S3C2410_DCLKCON to S3C24XX_DCLKCON Depends on Patch #3635/1 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3638/1: S3C2412: core clocksBen Dooks
Patch from Ben Dooks Clock support for the clocks on the Samsung S3C2412 and S3C2413 SoCs. This provides clock enables and parent selection for all the standard clocks. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3637/1: S3C24XX: Add mpll clock, and set as fclk parentBen Dooks
Patch from Ben Dooks Update the clocks with the MPLL clock, and use it as the parent. Also export these to the rest of arch/arm/mach-s3c2410 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3635/1: S3C24XX: Add S3C2412 core cpu supportBen Dooks
Patch from Ben Dooks Add support for the Samsung S3C2412 and S3C2413 range of SoCs. This patch contains the core identification, debug macros, and basic register updates to get these to build. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24[ARM] 3633/1: S3C24XX: s3c2410 gpio bugfix - wrong pin nosBen Dooks
Patch from Ben Dooks The s3c2410 gpio functions have a pair of bugs where the code is using the pin function definitions instead of the pin gpio numbers. Also remove the changelog Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22[ARM] 3628/1: S3C24XX: add get_rate call to struct clkBen Dooks
Patch from Ben Dooks Add a get_rate call to allow an given clock to over-ride the clk_get_rate() call. This provides support for clocks which rely on division of their parent to correctly report their frequency when the parent can also change. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22[ARM] 3627/1: S3C24XX: split s3c2410 clocks from core clocksBen Dooks
Patch from Ben Dooks Split the s3c2410 specific clocks from the core clock code, as part of the work to support more of the Samsung line of SoCs. The patch does not use the sysdev mechanism as the clocks are needed for the timer init, which is very early in the kernel init sequence. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22[ARM] 3613/1: S3C2410: Add sysdev and sysclassBen Dooks
Patch from Ben Dooks The S3C2440 and S3C2442 both have their own sysdev and sysclass for differentiating them from the currently default S3C2410. Add a sysdev for the S3C2410 as part of the work to make the code be non-dependant on the S3C2410. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19[ARM] 3591/1: Anubis: IDE device definitionsBen Dooks
Patch from Ben Dooks Platform device definitions for the two IDE ports on the Simtec Anubis board. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3559/1: S3C2442: core and serial portBen Dooks
Patch from Ben Dooks Core support for the Samsung S3C2442, and the serial port driver update to allow the serial port blocks to be used. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3557/1: S3C24XX: centralise and cleanup uart registrationBen Dooks
Patch from Ben Dooks All the S3C24XX based devices currently have similar uart blocks, in the same location. Make the process of adding new uart blocks easier by commonising the device definitions and adding a new init function for the cpu code. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3558/1: SMDK24XX: LED platform devicesBen Dooks
Patch from Ben Dooks Platform devices for the LEDs on all the SMDK24XX boards Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3553/1: S3C24XX: earlier print of cpu idcode infoBen Dooks
Patch from Ben Dooks Move the printk of the CPU information and IDCODE before the checking of the table entry validity to aide in debugging new cpu entries. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGHBen Dooks
Patch from Ben Dooks If CONFIG_CPU_DCACHE_WRITETHOUGH is set, then the S3C24XX PM code fails to compile, as there is no need to flush the D-cache, the flush function arm920_flush_kern_cache_all() is not compiled. Fix the code to not use this if the config is set. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-18[ARM] 3550/1: OSIRIS: fix serial port map for 1:1Ben Dooks
Patch from Ben Dooks The default serial port-mapping for the Osiris has the port 2 mapped onto the first serial port, and no port1. Correct this so port 1 is port. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-04[ARM] Trivial typo fixesEgry Gabor
Trivial typo fixes in Kconfig files (ARM). Signed-off-by: Egry Gabor <gaboregry@t-online.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-17[ARM] 3529/1: s3c24xx: fix restoring control register with undefined instructionDimitry Andric
Patch from Dimitry Andric In arch/arm/mach-s3c2410/sleep.S, the coprocessor registers are saved at suspend time, and restored at resume time. However, an undefined instruction is used when attempting to restore a non-existent "auxiliary control register". This leads to a crash on S3C2412, which has an ARM926 core instead of an ARM920. At suspend time, the following fragment runs: mrc p15, 0, r7, c2, c0, 0 @ translation table base address mrc p15, 0, r8, c2, c0, 0 @ auxiliary control register mrc p15, 0, r9, c1, c0, 0 @ control register and at resume time, the following fragment runs: mcr p15, 0, r7, c2, c0, 0 @ translation table base mcr p15, 0, r8, c1, c1, 0 @ auxilliary control ... mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc There are several problems with these fragments: 1. The ARM920 and ARM926 cores don't have any "auxiliary control register", at least not according to the ARM920 and ARM926 TRM's. 2. The 2nd line of suspend erroneously saves the c2 register again. 3. This saved c2 value is restored using an undefined instruction. For some reason this does not crash on ARM920, but does crash on ARM926. The following patch fixes all these problems. Signed-off-by: Dimitry Andric <dimitry@andric.com> Yes, this looks sensible Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-13[ARM] 3475/1: S3C2410: fix spelling mistake in SMDK partition tableBen Dooks
Patch from Ben Dooks Fix bad spelling of partition Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-11[ARM] 3474/1: S3C2440: USB rate writes wrong var to CLKDIVNBen Dooks
Patch from Ben Dooks The wrong variable is written back to CLKDIVN register if the USB PLL speed is above 94MHz Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-09[ARM] 3469/1: S3C24XX: clkout missing hclk selectorBen Dooks
Patch from Ben Dooks The clkout0/1 output parent code is missing the HCLK option, and does not set clk->parent field after updating the clock field Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-09[ARM] 3468/1: S3C2410: SMDK common include fixBen Dooks
Patch from Ben Dooks common-smdk.c does not include its own header file defining the exported prototypes. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3452/1: [S3C2410] RX3715 - add nand informationBen Dooks
Patch from Ben Dooks NAND definitions for the HP iPAQ RX3715's internal NAND flash Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3449/1: [S3C2410] Anubis - fix NAND timingsBen Dooks
Patch from Ben Dooks The NAND timings on the Anubis are too large to be selected when running at 133MHz memory clock. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3448/1: [S3C2410] Settle delay when _enabling_ USB PLLBen Dooks
Patch from Ben Dooks Fix the bug in the UPLL enable code which should have put a 200uS delay in if enabling the USB PLL from the state where it is off. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3442/1: [S3C2410] SMDK: NAND device setupBen Dooks
Patch from Ben Dooks Add SMDK2410/SMDK2440 NAND device information and default partition table. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3447/1: [S3C2410] SMDK - default LEDs to offBen Dooks
Patch from Ben Dooks Set default state of LEDs to off Fixes context of Patch #3442/1 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-01[ARM] 3440/1: [S3C2410] make SMDK2410 and SMDK2440 similarities commonBen Dooks
Patch from Ben Dooks The SMDK2410 and SMDK2440 boards have a number of items in common, including the LEDs, Ethernet, PCMCIA. Make a common SMDK support file. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-24[PATCH] s/;;/;/gAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-21[ARM] 3375/1: S3C2440 - fix osiris machine buildBen Dooks
Patch from Ben Dooks Fix the build of arch/arm/mach-s3c2410/mach-osiris.c and fix the warnings from sparse. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3361/1: S3C24XX - add USB bus clock sourceBen Dooks
Patch from Ben Dooks Add USB bus clock definition for 48MHz fed to OHCI and gadget cores Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3360/1: S3C2440 - add set rate methods and camera clockBen Dooks
Patch from Ben Dooks Add set_rate methods for the extra clocks on the S3C2440 and add the camera UPLL clock source Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3359/1: S3C24XX - add support for clk_set_rateBen Dooks
Patch from Ben Dooks Add support for clk_set_rate and clk_round_rate to the s3c2410 clock implementation Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3333/1: S3C2XX - add dclk and clkout clock supportBen Dooks
Patch from Ben Dooks Add enable and set_parent calls for the dclk and clkout clocks. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3331/1: S3C24XX - add clk_set_parent() to clock codeBen Dooks
Patch from Ben Dooks Add clk_set_parent() call to clock code Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3330/1: S3C24XX - move UPLL to main clockBen Dooks
Patch from Ben Dooks Move the UPLL clock registration to the central clock file, and add an enable method Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3329/1: S3C24XX - fix time for osiris machineBen Dooks
Patch from Ben Dooks Add selection for timer code for the Simtec Osiris Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] 3327/1: S3C2410 - add osiris machine supportBen Dooks
Patch from Ben Dooks Support for Simtec IM2440D20 CPU modules (Osiris) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-15[ARM] 3358/1: [S3C2410] add missing SPI DMA resourcesAlbrecht Dreß
Patch from Albrecht Dreß Add DMA resources to s3c2410 spi platform devices - dma_(alloc|free)_coherent should now work as expected. Signed-off-by: Albrecht Dreß <albrecht.dress@lios-tech.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-10[ARM] 3326/1: H1940 - Control latchesBen Dooks
Patch from Ben Dooks Define the bits for the two board control latches that control various items on the H1940 iPAQ. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-09[ARM] 3314/1: S3C2400 - adds s3c2400.hLucas Correia Villa Real
Patch from Lucas Correia Villa Real This patch adds s3c2400.h, fixing the build for the 2410/2440 platforms. Signed-off-by: Lucas Correia Villa Real <lucasvr@gobolinux.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3299/1: S3C24XX - fix irq range on adc deviceBen Dooks
Patch from Ben Dooks Change the IRQ resource range for the ADC device to be two distinct IRQs Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3303/1: S3C24XX - add clock enable usage countingBen Dooks
Patch from Ben Dooks Move to using an enable count for the shared clocks and protect the clock system using a mutex instead of just disabling IRQs during the clock update. Since there is little more code in the path for non-shared clocks, the enable and disable calls use the same code for each. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>