aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c2410
AgeCommit message (Collapse)Author
2009-08-14Merge branch 'next-s3c64xx-moves' into next-s3cBen Dooks
2009-08-14Merge branch 'next-s3c24xx-cpufreq' into next-s3cBen Dooks
2009-08-14Merge branch 'next-s3c24xx' into next-s3cBen Dooks
2009-08-14Merge branch 'next-s3c-hwmon' into next-s3cBen Dooks
2009-08-14ARM: S3C24XX: Add SPI bus 1 on GPD8 through GPD10Ben Dooks
Add configuration callback for SPI bus 1 on GPD[8..10] and ensure the correct GPIO configuration register definitions in regs-gpio.h Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-14ARM: S3C24XX: Add platform device for AC97 controllerMark Brown
Move the definition of the "generic" IRQ in the process. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-31ARM: S3C: move s3c_device_nand from plat-s3c24xx to plat-s3cPeter Korsgaard
Move the s3c_device_nand platform device from plat-s3c24xx to plat-s3c, now that the nand driver also support the s3c64xx devices. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C: CPUFREQ: Add debugfs support for cpufreqBen Dooks
Add debugfs support for the cpufreq driver to allow information about the system state to be exported to the user. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C2410: Add armclk for cpufreq supportBen Dooks
Add armclk for use with the cpufreq support and anything else that may want it. This clock is just a direct descendant of fclk. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: BAST: CPUFREQ: Add board supportBen Dooks
Add board support for CPUFREQ with the Simtec BAST board registering the necessary information with the core. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C2410: Add S3C2410A sysdev.Ben Dooks
Add a sysdev S3C2410A sysdev to allow the differentiation of the S3C2410A from the S3C2410. This is needed for the CPUFREQ code to enable the extra features and update cpu specific information. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C2412: Update memory register mapping and definitionsBen Dooks
Update the mapping of the memory controler registers and add the missing definitions of the register block for the SSMC. The register contents definitions can be found in the pl093 header. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C2410: CPUFREQ: Add PLL tableBen Dooks
Add PLL table for the S3C2410 SoC. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C2410: CPUFREQ: Add core support.Ben Dooks
Add core support for frequency scaling on the S3C2410 SoC. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-30ARM: S3C24XX: Add BWSCON per-bank information.Ben Dooks
Add definitions and an accessor macro to deal with reading bus information from S3C2410_BWSCON for any given numbered bank. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-29S3C24XX: GPIO: Fix pin range check in s3c_gpiolib_getchipLars-Peter Clausen
In the s3c_gpiolib_getchip implementation for s3c24xx the check whether a pin is in the gpio banks range is reversed. Thus the function returns NULL for valid pins and the gpio chip if its not valid. As a result gpio states are not saved/restored properly during suspend/resume. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-18ARM: BAST: Add hwmon device informationBen Dooks
Add platform device information for the ADC channels to be exported via HWMON. This exports all the ADCs not being used for the touchscreen interface. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16[ARM] S3C24XX: remove duplicated #includeHuang Weiyi
Remove duplicated #include in arch/arm/mach-s3c2410/usb-simtec.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-10Merge branch for-rmk-devel of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2009-05-21[ARM] S3C24XX: Merge devel-gpioBen Dooks
Merge branch 'devel-gpio' into for-rmk-devel
2009-05-18[ARM] S3C24XX: GPIO: Change usb-simtec.c to use gpiolib.Ben Dooks
Make arch/arm/mach-s3c2410/usb-simtec.c use gpiolib to manage gpio access. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18[ARM] S3C24XX: GPIO: Fix error returns from gpio functionsBen Dooks
Several GPIO functions have been returning -1 to indicate an error instead of returning a proper error code. Change to return -EINVAL for invalid argument(s). Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18[ARM] S3C: Merge next-s3c64xx-dma2 into for-rmk-develBen Dooks
Merge branch 'next-s3c64xx-dma2' into for-rmk-devel Conflicts: arch/arm/plat-s3c64xx/Makefile
2009-05-18[ARM] S3C24XX: GPIO: Change to macros for GPIO numberingBen Dooks
Prepare to remove the large number of S3C2410_GPxn defines by moving to S3C2410_GPx(n) in arch/arm. The following perl was used to change the files: perl -pi~ -e 's/S3C2410_GP([A-Z])([0-9]+)([^_^0-9])/S3C2410_GP\1\(\2\)\3/g' Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18[ARM] S3C24XX: GPIO: Add S3C64XX style GPIO numberingBen Dooks
Move the new style of GPIO numbering by using a single macro for each GPIO bank. This means S3C2410_GPA0 becomes S3C2410_GPA(0), and so on. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18[ARM] S3C24XX: GPIO: Clean out unused definitions in <mach/regs-gpio.h>Ben Dooks
The <mach/regs-gpio.h> really does not need the input and output pin configurations as these are standard and have a generic representation (plus the s3c24xx gpio specific code is going to be phased out soon). The following sed was applied to remove the lines: sed -i~ -e '/S3C2410_GP[A-Z][0-9]*_\INP/d' \ -e '/S3C2410_GP[A-Z][0-9]*_\OUTP/d' \ -e '/S3C2410_GPA[0-9]*_OUT/d' to remove these. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18[ARM] S3C24XX: GPIO: Move gpio functions out of <mach/hardware.h>Ben Dooks
Move all the gpio functions out of <mach/hardware.h> as this file is for defining the generic IO base addresses for the kernel IO calls. Make a new header <mach/gpio-fns.h> to take this and include it via the chain from <linux/gpio.h> which is what most of these files should be using (and will be changed as soon as possible). Note, this does make minor changes to some drivers but should not mess up any pending merges. CC: Richard Purdie <rpurdie@rpsys.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> CC: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-17[ARM] S3C: Move watchdog system reset to own file.Ben Dooks
Move the watchdog reset code from <mach/system-reset.h> to a new file <plat/watchdog-reset.h> as this code is needed by both s3c2410, s3c64xx and soon-to-be added s3c24a0. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-17[ARM] S3C24XX: GPIO: Remove pin specific input and output definesBen Dooks
The use of S3C2410_GP[A-Z]x_INP and S3C2410_GP[A-Z]x_OUTP are very rare and are taking up large amounts of space in the regs-gpio.h header. The GPIO layer has had generic input and out defines called S3C2410_GPIO_INPUT and S3C2410_GPIO_OUTPUT for a while which work for all S3C24XX GPIOs. Do the following replacements: S3C2410_GP[A-Z][0-9]*_\OUTP => S3C2410_GPIO_OUTPUT S3C2410_GP[A-Z][0-9]*_\INP => /S3C2410_GPIO_INPUT S3C2410_GPA[0-9]*_OUT => S3C2410_GPIO_OUTPUT to remove any usages of these and prepare the header for the removal of these. The following command was used to acheive this: find . -type f -writable ! -name regs-gpio.h ! -name "*~" | xargs sed -i~ -e 's/S3C2410_GP[A-Z][0-9]*_\OUTP/S3C2410_GPIO_OUTPUT/g' -e 's/S3C2410_GP[A-Z][0-9]*_\INP/S3C2410_GPIO_INPUT/g' -e 's/S3C2410_GPA[0-9]*_OUT/S3C2410_GPIO_OUTPUT/g' Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-17[ARM] S3C24XX: GPIO: Remove s3c2410_gpio_irq2pin() callBen Dooks
Remove the s3c2410_gpio_irq2pin() function as it is not being used in any in kernel driver and the function is probably not being used anywhere else. This is also part of the effort to remove any of the s3c24xx gpio specific code that cannot be recreated by using the gpiolib framework now in the kernel. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-15[ARM] S3C2410: mach-bast.c registering i2c data too earlyBen Dooks
The BAST support code is calling s3c_i2c0_set_platdata() from the map_io() entry, instead of the bast_init() code. This causes the registration to fail due to kmalloc() not being available at the time. This fixes the following error: s3c_i2c0_set_platdata: no memory for platform data Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C: Rename S3C24XX_PA_USBHOST to S3C_PA_USBHOSTBen Dooks
The USB host base address is available on both the S3C24XX and S3C64XX ranges. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] S3C: Add common USB OHCI device definitionBen Dooks
Add common definition for USB OHCI platform device, add a Kconfig to selectively compile it and add update all the users. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] S3C: Move DMA channel management code to plat-s3cBen Dooks
Change the name of S3C2410_DMA_CHANNELS to S3C_DMA_CHANNELS in the process. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] S3C24XX: dma.h should not include <mach/hardware.h>Ben Dooks
The dma.h header does not need to include <mach/hardware.h> as there is nothing it depends on. Remove the include and fixup the couple of places where <mach/map.h> was not explicitly included (dragged in via <mach/hardware.h>) Note, we have to fix arch/arm/plat-s3c24xx/pm.c which seems to rely on having <mach/hardware.h> included by this method. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] S3C: Make common <plat/dma.h> headerBen Dooks
Move the common information from the <mach/dma.h> header into a new shareable <plat/dma.h> header for re-use on the s3c64xx. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] S3C24XX: DMA: Split hardware regs out of <mach/dma.h>Ben Dooks
The <mach/dma.h> is for the driver API for the DMA system and should not have anything relying on the CPU specific registers. Remove the registers to <plat/dma-regs.h> for the code that really needs to know about them. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] S3C24XX: Remove hardware specific registers from DMABen Dooks
calls The S3C24XX DMA API channel configuration registers are being passed values comprised of register values which makes it hard to move the API to cover both the S3C24XX and S3C64XX. These values can be calculated from knowing which device the channel is connected to, so remove them from the two calls s3c2410_dma_config and s3c2410_dma_devconfig. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] S3C24XX: Move plat/dma.hBen Dooks
Move the platform dma.h to dma-plat.h to ensure it doen't get confused with plat/dma.h Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-07i2c-s3c2410: Simplify bus frequency calculationDaniel Silverstone
The platform data for the i2c-s3c2410 driver used to allow a min, max and desired frequency for the I2C bus. This patch reduces it to simply a desired frequency ceiling and corrects all the uses of the platform data appropriately. This means, for example, that on a system with a 66MHz fclk, a request for 100KHz will achieve 65KHz which is safe and acceptable, rather than 378KHz which it would have achieved without this change. Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk> [ben-linux@fluff.org: tidy subject and description] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-28Merge branch 'origin' into develRussell King
Conflicts: sound/soc/pxa/pxa2xx-i2s.c
2009-03-26Merge branch 'next-s3c-pm' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2009-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (97 commits) USB: qcserial: add device id for HP devices USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.c USB: allow malformed LANGID descriptors USB: pxa27x_udc: typo fixes and code cleanups USB: gadget: gadget zero uses new suspend/resume hooks USB: gadget: composite device-level suspend/resume hooks USB: r8a66597-hcd: suspend/resume support USB: more u32 conversion after transfer_buffer_length and actual_length USB: Fix cp2101 USB serial device driver termios functions for console use USB: CP2101 New Device ID USB: ipaq: handle 4 endpoint devices USB: S3C: Move usb-control.h to platform include USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue USB: pedantic: spelling correction in comment for ch9.h USB: host: fix sparse warning: Using plain integer as NULL pointer USB: ohci-s3c2410: fix name of bus clock USB: ohci-s3c2410: remove <mach/hardware.h> include USB: serial: rename cp2101 driver to cp210x USB: CP2101 Reduce Error Logging USB: CP2101 Support AN205 baud rates ...
2009-03-24USB: S3C: Move usb-control.h to platform includeBen Dooks
The usb-control.h is needed by ohci-s3c2410.c for both S3C24XX and S3C64XX architectures, so move it to <plat/usb-control.h> Signed-off-by: Ben Dooks <ben@simtec.co.uk> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-19[ARM] pass reboot command line to arch_reset()Russell King
OMAP wishes to pass state to the boot loader upon reboot in order to instruct it whether to wait for USB-based reflashing or not. There is already a facility to do this via the reboot() syscall, except we ignore the string passed to machine_restart(). This patch fixes things to pass this string to arch_reset(). This means that we keep the reboot mode limited to telling the kernel _how_ to perform the reboot which should be independent of what we request the boot loader to do. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-11[ARM] Revert futher extraneous changes from the S3C header moveMark Brown
Can't see any immediate need for these; build tested. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-11[ARM] Revert extraneous changes from the S3C audio header moveMark Brown
These changes were included in the S3C audio header move but are not directly related to it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-08[ARM] S3C24XX: Add S3C_GPIO_END definitionBen Dooks
Add the definition for S3C_GPIO_END to allow the PM code to build. This means moving the GPIO bank numbers to a separate file to allow the gpio and regs-gpio to include them. Including regs-gpio.h into gpio.h causes too many build problems and adding gpio.h would mean editing a large number of files. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08[ARM] S3C: Rename sleep.S functions to be non-cpu specificBen Dooks
Rename s3c2410_cpu_resume to s3c_cpu_resume and s3c2410_cpu_save to s3c_cpu_save to remove the CPU specific naming of these functions which are now in the generic PM code. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-08[ARM] S3C: Rename s3c2410_pm_init to s3c_pm_init.Ben Dooks
Since we have moved a large proportion of the PM code to the common support area, remove the cpu specific name from the initialisation function. Signed-off-by: Ben Dooks <ben-linux@fluff.org>