aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c2410
AgeCommit message (Collapse)Author
2008-11-19fix-touchscreen-driver-gta01-missing-includes.patchMike Westerhof
Add missing initialization for the touchscreen driver for the gta01 platform. Signed-off-by: Mike Westerhof <mwester@dls.net>
2008-11-19test-touchscreen-median.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19tracking-2.6.28-breakage-after-change-to-64xx-tree.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19Carry over changes to spi-gpio.hJonas Bonn
This patch carries over the OpenMoko modifications at include/asm-arm/arch-s3c2410/spi-gpio.h to arch/arm/mach-s3c2410/include/mach/spi-gpio.h Note: board_size and board_info have been removed upstream, but as we still rely on them we'll just put them back for now. These will need to be removed (and the corresponding driver changes made, of course) before this can go upstream. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Carry over changes from asm/arch/regs-sdi.hJonas Bonn
This pulls the Moko changes to regs-sdi.h that were in include/asm-arm/arch-s3c2410 over to the file at arch/arm/../mach and deletes the file at include/asm-arm. Note: we have been using a mix of regs-sdi.h from the two different locations. The unification of these two files may have some unknown consequences... keep your eyes open for oddities after applying this. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/irqs.h to mach/irqs.hJonas Bonn
This "move" is not so much a file move as just carrying over the current status of the irqs.h file from include/asm-arm/arch-s3c2410 to the file at arch/arm/mach-s3c2410/include/mach. For some reason both files existed and had become out of sync. NOTE: Some of these changes look fishy... please check these properly. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/fiq_ipc_gta02.h to mach/fiq_ipc_gta02.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/gta02.h to mach/gta02.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/s3c24xx-serial.h to mach/s3c24xx-serial.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/ts.h to mach/ts.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/neo1973-pm-gsm.h to mach/neo1973-pm-gsm.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/mci.h to mach/mci.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19Move asm/arch/pwm.h to mach/pwm.hJonas Bonn
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19fix-stable-tracking-build-without-symlink.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19[ARM]: Move asm/arch/gpio.h to mach/ directoryJonas Bonn
This file was moved in the big file move, but some OpenMoko specific changes did not make it. This patch peels out the relevant bits and adds them to the gpio.h file in the upstream location. The only OpenMoko specific change is the definition of gpio_to_irq and irq_to_gpio. These functions should really be defined in gpio_chip and asm-generic/gpio.h; this is coming soon, but until then we'll just use the Moko definitions that we've been using up until now. This is not strictly correct for the GTA02 case, but it works given the configuration that's currently in use. This can be fixed (and should become evident) when the configuration options are cleaned up. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19[ARM]: Move asm/arch/gta01.h to include/machJonas Bonn
This file is OpenMoko specific and didn't get moved in the big file move. Move it to arch/arm/mach-s3c2410/include/mach where it belongs and fix the references to it. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19GTA01: Do I2C device registration in machine setup codeJonas Bonn
I2C devices should be registered with i2c_register_board_info in the machine setup code. This allows the devices to be auto-probed when the requred driver is loaded. Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
2008-11-19tracking-2.6.27-rc2-include-path-changes.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19checkpatch-fixes.patchAndy Green
This cleans out some random externs in C files that checkpatch does not like and introduces a couple of .h files to contain them. Plus some other minor checkpatch style complaints. Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19gta01-uart-fifo-trigger-sooner.patchMike Westerhof
Set the UART FIFO to trigger earlier on the GTA01 device to minimize UART overruns from the GSM. Signed-off-by: Mike Westerhof <mwester@dls.net>
2008-11-19fix-suspend-backlight-timing-gta01.patchMike Westerhof
This patch adds the gta01 backlight callback that defers the restoring of the backlight until after the jbt driver has resumed. This doesn't eliminate the flashing of the LCD on the gta01, but it reduces it considerably. Signed-off-by: Mike Westerhof <mwester@dls.net>
2008-11-19gta0x-add-minimal-GSM-flowcontrol.patchMike Westerhof
Add the basic GSM flowcontrol code. Signed-off-by: Mike Westerhof <mwester@dls.net>
2008-11-19tracking-2.6.27-irqtype-rename.patchAndy Green
Signed-off-by: Andy Green <andy@openmoko.com>
2008-11-19commit 5f42e24d361cd83178fe8da9d68efbf41a011483Mike Westerhof
Add missing initialization for the touchscreen driver for the gta01 platform. Signed-off-by: Mike Westerhof <mwester@dls.net>
2008-11-19s3c24xx-pwm-platform-driver.patchmatt_hsu
This patch is to register pwm as platform driver to keep the PWM-related config when system is in suspend/resume. This could fix the following issue after resume: - HDQ read timeout - LEDs blinked abnormally(if LEDs is driven by PWM) Signed-off-by: Matt Hsu <matt_hsu@openmoko.org>
2008-11-19gta01-fix-jbt-platform-missing-members.patchMike Westerhof
Created an attachment (id=594) / BZ#79 Add missing platform_data that caused the GTA01 to crash on suspend/resume The interface to the jbt6k74 driver changed slightly; this patch adds the missing platform_data for the GTA01. This prevents a crash while suspending. This patch also makes some minor changes to cleanup and clarify some debug messages. Signed-off-by: Mike Westerhof <mwester@dls.net>
2008-11-19fix-gta01-spi-resume-patchMike Wester
Patch to register the SPI device and thus the save/resume for the display This patch does *NOT* resolve this problem, but it does make things a bit better. The SPI device name changed with 2.6.24, and the change was made for the gta02 but never propagated to the gta01. With this change, you'll now see the entries for the spi bus and the display controller in /sys; and the display controller suspend/resume functions will be called. (via BZ 79) Signed-off-by: Mike Wester <mwester@dis.net>
2008-11-19[neo] Every access to GPIO bank B has to go through the shadow codeHolger Freyther
- Any setting of any PIN on bank B will undo the LED setting. Introduce neo1973_gpb_set_pin to set the PIN in a way not losing the LED or any other shadowed setting. - Update users of GPBXY for gta01 and gta02. Signed-Off-By: Holger Freyther <zecke@openmoko.org>
2008-11-19OpenMoko => OpenmokoHolger Freyther
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
2008-11-19s3c2410-qt2410-buttons.patchmokopatches
2008-11-19gta02-acc.patchmokopatches
2008-11-19s3c_mci-gta01.patchmokopatches
2008-11-19s3c2410_ts-gta01.patchmokopatches
2008-11-19s3c2410_touchscreen.patchmokopatches
2008-11-19s3c2410-pwm.patchmokopatches
This patch adds a PWM api abstraction for the S3C2410 SoC Signed-off-by: Javi Roman <javiroman@kernel-labs.org> Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-11-19gta01-jbt6k74.patchmokopatches
This driver adds support for the SPI-based control interface of the LCM (LCD Panel) found on the FIC GTA01 hardware. The specific panel in this hardware is a TPO TD028TTEC1, but the driver should be able to drive any other diplay based on the JBT6K74-AS controller ASIC. Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-11-19gta01-core.patchmokopatches
This patch adds support for the FIC Neo1973 GTA01 machine type to the ARM port of the Linux kernel. Signed-off-by: Harald Welte <laforge@openmoko.org>
2008-11-04[ARM] S3C24XX: Add fourth UART definition for S3C2443Ben Dooks
Add the fourth UART definition for the S3C2443, and at the same time fixup the problems caused by the enlarging of the UART array in the previous commits. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31[ARM] S3C: Make i2c device definition common to plat-s3cBen Dooks
Make the device i2c0 common to plat-s3c and move the definitions from arch/arm/plat-s3c24xx/devs.c Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31[ARM] S3C: Add new GPIO configuration callsBen Dooks
Add new GPIO configuration calls that mesh with the new gpiolib support. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31[ARM] S3C: Move HSMMC device definition to plat-s3ecBen Dooks
Move the definition for the hsmmc device to plat-s3c to be shared between the s3c24xx and s3c64xx platforms. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31Merge branch 's3c-moves2' into s3c64xxBen Dooks
2008-10-30[ARM] S3C: Move plat/regs-spi.h to arch/arm/plat-s3c/include/plat.Ben Dooks
Move plat/regs-spi.h to arch/arm/plat-s3c/include/plat ready ready to clean out old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C24XX: Movev udc headers to arch/arm/plat-s3c24xx/include/platBen Dooks
Move the udc headers to the proper home in arch/arm/plat-s3c24xx/include/plat ready to clean out the old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C: Move regs-ac97.h to arch/arm/plat-s3c/include/plat.Ben Dooks
Move regs-ac97.h to arch/arm/plat-s3c/include/plat ready to clean out old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C: Move nand headers to arch/arm/plat-s3c/include/platBen Dooks
Move nand headers to arch/arm/plat-s3c/include/plat ready to clean out the old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C: Move i2c headers to arch/arm/plat-s3c/include/plat.Ben Dooks
Move the i2c headers to arch/arm/plat-s3c/include/plat ready to clean out the old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C: Move regs-watchdog.h to arch/arm/plat-s3c/include/platBen Dooks
Move regs-watchdog.h to arch/arm/plat-s3c/include/plat ready to clean out the old include directories Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C6400: serial support for S3C6400 and S3C6410 SoCsBen Dooks
Add support to the Samsung serial driver for the S3C6400 and S3C6410 serial ports. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21[ARM] S3C: Move S3C2410_EXTINT to common regs-irqtype.h headerBen Dooks
Add a common include file (regs-irqtype.h) for the IRQ trigger control register values S3C2410_EXTINT*. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-19 20:22:50 +0000