Age | Commit message (Collapse) | Author |
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This patch carries over the OpenMoko modifications at
include/asm-arm/arch-s3c2410/spi-gpio.h to
arch/arm/mach-s3c2410/include/mach/spi-gpio.h
Note: board_size and board_info have been removed upstream, but as we
still rely on them we'll just put them back for now. These will need to
be removed (and the corresponding driver changes made, of course) before
this can go upstream.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This pulls the Moko changes to regs-sdi.h that were in
include/asm-arm/arch-s3c2410 over to the file at arch/arm/../mach and
deletes the file at include/asm-arm.
Note: we have been using a mix of regs-sdi.h from the two different
locations. The unification of these two files may have some unknown
consequences... keep your eyes open for oddities after applying this.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This "move" is not so much a file move as just carrying over the current
status of the irqs.h file from include/asm-arm/arch-s3c2410 to the file
at arch/arm/mach-s3c2410/include/mach. For some reason both files
existed and had become out of sync.
NOTE: Some of these changes look fishy... please check these properly.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This file was moved in the big file move, but some OpenMoko specific
changes did not make it. This patch peels out the relevant bits and
adds them to the gpio.h file in the upstream location.
The only OpenMoko specific change is the definition of gpio_to_irq and
irq_to_gpio. These functions should really be defined in gpio_chip and
asm-generic/gpio.h; this is coming soon, but until then we'll just use
the Moko definitions that we've been using up until now.
This is not strictly correct for the GTA02 case, but it works given
the configuration that's currently in use. This can be fixed (and
should become evident) when the configuration options are cleaned up.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
This file is OpenMoko specific and didn't get moved in the big file
move. Move it to arch/arm/mach-s3c2410/include/mach where it belongs
and fix the references to it.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
I2C devices should be registered with i2c_register_board_info in the machine
setup code. This allows the devices to be auto-probed when the requred driver
is loaded.
Signed-off-by: Jonas Bonn <jonas.bonn@gmail.com>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
This cleans out some random externs in C files that checkpatch does not like
and introduces a couple of .h files to contain them. Plus some other minor
checkpatch style complaints.
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Set the UART FIFO to trigger earlier on the GTA01 device to minimize
UART overruns from the GSM.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
This patch adds the gta01 backlight callback that defers the
restoring of the backlight until after the jbt driver has
resumed. This doesn't eliminate the flashing of the LCD on
the gta01, but it reduces it considerably.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Add the basic GSM flowcontrol code.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Signed-off-by: Andy Green <andy@openmoko.com>
|
|
Add missing initialization for the touchscreen driver for the
gta01 platform.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
This patch is to register pwm as platform driver to keep the PWM-related
config when system is in suspend/resume. This could fix the following
issue after resume:
- HDQ read timeout
- LEDs blinked abnormally(if LEDs is driven by PWM)
Signed-off-by: Matt Hsu <matt_hsu@openmoko.org>
|
|
Created an attachment (id=594) / BZ#79
Add missing platform_data that caused the GTA01 to crash on suspend/resume
The interface to the jbt6k74 driver changed slightly; this patch adds the
missing platform_data for the GTA01. This prevents a crash while suspending.
This patch also makes some minor changes to cleanup and clarify some debug
messages.
Signed-off-by: Mike Westerhof <mwester@dls.net>
|
|
Patch to register the SPI device and thus the save/resume for the display
This patch does *NOT* resolve this problem, but it does make things a bit
better. The SPI device name changed with 2.6.24, and the change was made for
the gta02 but never propagated to the gta01. With this change, you'll now see
the entries for the spi bus and the display controller in /sys; and the display
controller suspend/resume functions will be called.
(via BZ 79)
Signed-off-by: Mike Wester <mwester@dis.net>
|
|
- Any setting of any PIN on bank B will undo the LED setting.
Introduce neo1973_gpb_set_pin to set the PIN in a way not losing
the LED or any other shadowed setting.
- Update users of GPBXY for gta01 and gta02.
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
Signed-Off-By: Holger Freyther <zecke@openmoko.org>
|
|
|
|
|
|
|
|
|
|
|
|
This patch adds a PWM api abstraction for the S3C2410 SoC
Signed-off-by: Javi Roman <javiroman@kernel-labs.org>
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This driver adds support for the SPI-based control interface of the LCM (LCD
Panel) found on the FIC GTA01 hardware.
The specific panel in this hardware is a TPO TD028TTEC1, but the driver should
be able to drive any other diplay based on the JBT6K74-AS controller ASIC.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
This patch adds support for the FIC Neo1973 GTA01 machine type to the ARM port
of the Linux kernel.
Signed-off-by: Harald Welte <laforge@openmoko.org>
|
|
Add the fourth UART definition for the S3C2443, and at the
same time fixup the problems caused by the enlarging of the
UART array in the previous commits.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Make the device i2c0 common to plat-s3c and move the
definitions from arch/arm/plat-s3c24xx/devs.c
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Add new GPIO configuration calls that mesh with the
new gpiolib support.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Move the definition for the hsmmc device to plat-s3c
to be shared between the s3c24xx and s3c64xx platforms.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
|
|
Move plat/regs-spi.h to arch/arm/plat-s3c/include/plat ready
ready to clean out old include directories.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Move the udc headers to the proper home in
arch/arm/plat-s3c24xx/include/plat ready to clean out
the old include directories.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Move regs-ac97.h to arch/arm/plat-s3c/include/plat ready
to clean out old include directories.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Move nand headers to arch/arm/plat-s3c/include/plat
ready to clean out the old include directories.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Move the i2c headers to arch/arm/plat-s3c/include/plat
ready to clean out the old include directories.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Move regs-watchdog.h to arch/arm/plat-s3c/include/plat ready
to clean out the old include directories
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Add support to the Samsung serial driver for the S3C6400
and S3C6410 serial ports.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Add a common include file (regs-irqtype.h) for the IRQ
trigger control register values S3C2410_EXTINT*.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
|
|
Add the necessary defines for <mach/uncompress.h>
to function and build an working header code block.
Signed-off-by: Ben Doioks <ben-linux@fluff.org>
|