aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c2412
AgeCommit message (Collapse)Author
2008-12-18[ARM] S3C: Remove unnecessary <linux/delay.h> includesBen Dooks
As per Russell King's last review comment, find and remove all unnecessary includes of <linux/delay.h> in the files that do not need them. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18Merge branch 'next-s3c64xx-device' into next-mergedBen Dooks
Conflicts: arch/arm/mach-s3c2440/mach-at2440evb.c
2008-12-18Merge branch 'next-s3c64xx' into next-mergedBen Dooks
2008-12-18Merge branch 'next-s3c24xx' into next-mergedBen Dooks
2008-12-18[ARM] JIVE: fix spi gpio implementationBen Dooks
Fix the name of the driver, as well as the fact we are not passing the number of chipselects to the driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-16[ARM] S3C: Update time initialisation to fix S3C64XX time problemsBen Dooks
The S3C64XX timer is running at the wrong rate due to the assumptions made in the timer initialisation about the way the pwm dividers work. This means that time on the S3C64XX runs twice as fast as it should. Fix the problem by moving to using the clk framework to setup the pwm timer clock muxes, as the pwm-clock code has all the necessary knowledge of how the timer clock inputs are routed. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C: Make i2c device definition common to plat-s3cBen Dooks
Make the device i2c0 common to plat-s3c and move the definitions from arch/arm/plat-s3c24xx/devs.c Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C64XX: Add initial clock frameworkBen Dooks
Add the initial clocks definitions for the s3c6400 and s3c6410. Move the epll and ext clock from the s3c2443 support into the common code. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C24XX: Update clock data on resumeBen Dooks
Update the clock settings on resume for suspend/resume support so that if the boot loader changes anything or the system's PLL is reset then we return with the correct settings. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C24XX: Split pll code out of regs-clock.hBen Dooks
Move the PLL calculation code into it's own header file for re-use with the other plat-s3c24xx based systems such as the S3C24A0. Note, we change the name of s3c2410_get_pll to the more generically named s3c24xx_get_pll as well as the related defintions. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C24XX: Move initialisation code to arch/arm/plat-s3cBen Dooks
We need to add plat-s3c to the build to get the headers that will go in here once moved from include/asm-arm so we may as well put some useful common s3c code in here to stop the errors generated form having nothing built. The cpu setup is now passed the cpu idcode and the table of supported cpus to s3c_init_cpu() to abstract the cpu identification out of the initial io setup. As well as moving the cpu initialisation code, we move the map of the board specific items up to the calling code as none of the map_io() functions actually do anything other than pass this to iotable_init(). This patch does not rename any of the init functions that will be common to s3c24xx and any other s3c architectures as this can be done at a later date as it will touch all the board support files which use functions such as s3c24xx_init_clocks() and s3c24xx_init_uarts(). Note, the header arch/arm/plat-s3c24xx/include/plat/cpu.h still has functions that are used by both the cpu and board initialisation functions. This means that each board has definitions specific to the cpu support included and the vice-versa. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-11-29Merge branch 's3c-moves2' of git://aeryn.fluff.org.uk/bjdooks/linux into develRussell King
2008-11-29[ARM] Hide ISA DMA API when ISA_DMA_API is unsetRussell King
When ISA_DMA_API is unset, we're not implementing the ISA DMA API, so there's no point in publishing the prototypes via asm/dma.h, nor including the machine dependent parts of that API. This allows us to remove a lot of mach/dma.h files which don't contain any useful code. Unfortunately though, some platforms put their own private non-ISA definitions into mach/dma.h, so we leave these behind and fix the appropriate #include statments. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-27[ARM] Arrange for platforms to select appropriate CPU supportRussell King
Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-30[ARM] S3C: Move plat/regs-spi.h to arch/arm/plat-s3c/include/plat.Ben Dooks
Move plat/regs-spi.h to arch/arm/plat-s3c/include/plat ready ready to clean out old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C24XX: Movev udc headers to arch/arm/plat-s3c24xx/include/platBen Dooks
Move the udc headers to the proper home in arch/arm/plat-s3c24xx/include/plat ready to clean out the old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C: Move regs-ac97.h to arch/arm/plat-s3c/include/plat.Ben Dooks
Move regs-ac97.h to arch/arm/plat-s3c/include/plat ready to clean out old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C: Move nand headers to arch/arm/plat-s3c/include/platBen Dooks
Move nand headers to arch/arm/plat-s3c/include/plat ready to clean out the old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-30[ARM] S3C: Move i2c headers to arch/arm/plat-s3c/include/plat.Ben Dooks
Move the i2c headers to arch/arm/plat-s3c/include/plat ready to clean out the old include directories. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-14Merge branch 's3c-move' into develRussell King
Conflicts: arch/arm/mach-versatile/core.c
2008-10-09Merge branch 'pxa-all' into develRussell King
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/corgi.c arch/arm/mach-pxa/include/mach/hardware.h arch/arm/mach-pxa/spitz.c
2008-10-09Merge branch 'ptebits' into develRussell King
Conflicts: arch/arm/Kconfig
2008-10-09[ARM] 5298/1: Drop desc_handle_irq()Dmitry Baryshkov
desc_handle_irq() was declared as obsolete since long ago. Replace it with generic_handle_irq() Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-07[ARM] S3C24XX: Additional include movesBen Dooks
Continue moving the include files into arch/arm Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-07[ARM] S3C24XX: Move files out of include/asm-arm/plat-s3c*Ben Dooks
First move of items out of include/asm-arm/plat-s3c* to their new homes under arch/arm/plat-s3c/include/plat and arch/arm/plat-s3c24xx/include/plat directories. Note, we have to create a dummy arch/arm/plat-s3c/Makefile to allow us to add arch/arm/plat-s3c/include/plat to the path. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-26[ARM] JIVE: Fix the spi bus numberingBen Dooks
The first spi bus is registered with number 0, but the board data says that the device on it is registered on bus 1. Move the spi bus to bus 1 to keep the compatibility with the original board-support patches. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-09[ARM] JIVE: Remove duplicated mtd includesHuang Weiyi
Removed duplicated include file <linux/mtd/mtd.h> and <linux/mtd/partitions.h> in arch/arm/mach-s3c2412/mach-jive.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03[ARM] S3C2412: Correct parents for EREFCLK and UREFCLKMatthieu Castet
For s3c2412, set parent for clk_erefclk and clk_urefclk. This allow for example to use xtal or extclk for i2s clock. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com>
2008-07-03[ARM] JIVE: Add power off on shutdown supportBen Dooks
Add pm_power_off hook to allow the Logitech Jive to shutdown when asked to halt. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Add i2c device info for LIS302DL sensorBen Dooks
Add i2c bus definition for the LIS302DL sensor driver which is connected on the i2c bus. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Add board definitions for audioBen Dooks
Add board definitions for the audio device connected on the Logitech Jive. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Add LCD display setup informationBen Dooks
Add the setup information for the LCD display connected to the device. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Add SPI bus definitions for LCD controllerBen Dooks
Add the definitions for the VGG2432A4 intelligent LCD display conneected via an GPIO-based SPI bus on the Logitech Jive. Signed-of-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Add setup information for the S3C2412 LCD controllerBen Dooks
Setup the video controller information for the Jive. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Initialise the sleep configuration registersBen Dooks
Ensure that the S3C2412 sleep configuration registers are approriately setup so that the device can safely go to sleep. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-07-03[ARM] JIVE: Initial machine support for Logitech JiveBen Dooks
This is the base machine support for the Logitech Jive machine. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-04-17[ARM] 4985/1: S3C2412: Fix ARMDIVN name in CLKDIVN definition.Ben Dooks
Fix the name of the S3C2412_CLKDIVN_ARMDIVN define. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4791/1: S3C2412: Make fclk a parent of msysclkBen Dooks
In the S3C2412 fclk is derived from msysclk, not straight from the MPLL output. Set clk_f.parent appropriately. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4790/1: S3C2412: Fix parent selection for msysclk.Ben Dooks
The msysclk clock was checking for the wrong PLL for the parent in s3c2412_setparent_msysclk(), trying the UPLL instead of the MPLL output. Also ensure the mpll and fclks are at the same rate at init time. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RXBen Dooks
The current S3C24XX DMA code does not allow for an peripheral that has one channel for RX and another for TX. This patch adds a per-cpu dma operation to select the transmit or receive channel, and adds support to the S3C2412 for the seperate DMA channels for TX and RX. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() callBen Dooks
Add s3c2412_gpio_set_sleepcfg() to allow the setting of the sleep configuration of the GPIO blocks. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4778/1: S3C2412: Add armclk and init from DVS stateBen Dooks
Add armclk to the S3C2412 to indicate the current clock connected to the ARM core. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4731/1: S3C2412: Check for incomplete sleepBen Dooks
Check if the sleep command returns due to a pending interrupt in the standby unit. If this happens, try and ack the IRQ before re-trying the resume. It is currently unclear whether the resume can be backed out of at this stage as this could cause a problem with level based interrupts. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4730/1: S3C2412: Ensure the PWRCFG has the right mode for RTC wakeBen Dooks
Ensure that if the RTC IRQ is not selected for wake in the base configuration, then the PWRCFG has the same value set in it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4727/1: S3C2412: Remove unused GPESLPCONBen Dooks
S3C2412_GPESLPCON does not exist in the register mappings, so remove it. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4725/1: S3C2412: Fix IIS and SDI definitions in DMA mapBen Dooks
The IIS and SDI register hw_addr definitions are incorrect in the DMA map for the S3C2412. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28[ARM] 4724/1: S3C2412: Select S3C2410 base GPIO implementationBen Dooks
The S3C2412 GPIO is similar enough to the S3C2410 that it can use it as a base for GPIO functionality. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>