aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-s3c6410/mach-smdk6410.c
AgeCommit message (Collapse)Author
2009-11-09ARM: SMDK6410: Configure GPIO pull up for WM835x IRQ lineMark Brown
When used with the WM1190-EV1 board we can use the internal pull up resistor of the CPU to provide the required pull for the IRQ line. Without this interrupts from the WM835x don't work in the default WM1190-EV1 hardwaer configuration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-14ARM: S3C64XX: Add UART2,UART3 support for SMDK6410 (resend)Matt Hsu
Add proper uartcfg for UART port 2,3 and tidy it up on SMDK6410. Signed-off-by: Matt Hsu <matt@0xlab.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-16[ARM] SMDK6410: Add USB high-speed/OtG gadget deviceBen Dooks
Add the USB gadget support to the SMDK6410. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-07[ARM] Merge next-s3c-s3c6410 into for-rmk-develBen Dooks
Merge branch 'next-s3c-s3c6410' into for-rmk-devel
2009-05-07[ARM] SMDK6410: Add USB OHCI hostBen Dooks
Add USB OHCI host capability to the SMDK6410 for either USB OtG or a single/double USB host port. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Hook regulator control of VDDARM up for WM1190-EV1Mark Brown
This allows the S3C CPUfreq driver to do DVFS. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Mark all supplies as always_onMark Brown
Since no consumers are currently configured for the SMDK6410 mark all the supplies on the board as being always_on, ensuring interoperability with future regulator API changes to disable unused regulators. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Use active high IRQ for the WM8350 on the WM1190-EV1Mark Brown
Using an active high IRQ ensures that the WM8350 interrupt handling does not spin when used with a SMDK6410 which has not had R20 removed and R21 fitted to connect EINT12 to the PMIC module rather thant the fixed regulators on the CPU module. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Support WM1190-EV1 PMIC boardMark Brown
The SMDK6410 supports pluggable PMIC boards. One such board is the Wolfson Microelectronics 1190-EV1 for the WM8350 PMICs. This patch introduces initial support for this module. Further patches will add additional integration with the system as support for the S3C6410 and other devices on the system improves. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Add support for SMSC9115 ethernet controllerMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-01[ARM] SMDK6410: Ensure LCD settings are setupBen Dooks
Ensure that the LCD output type is RGB and that the modem interface is not bypassing the LCD block. This ensures the LCD interface output gets to the pins in the correct format. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-15[ARM] SMDK6410: Request GPIOs for LCD power controlMark Brown
Going forward gpio_request() will be a requirement for GPIO API users so call it for the LCD power GPIOs. With present code the kernel functions but generaets loud WARN_ON()s when using the unrequested GPIOs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-26[ARM] SMDK6410: Declare iodesc table staticMark Brown
Shuts up a warning. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-02-26[ARM] SMDK6410: Correct I2C device name for WM8580Mark Brown
The WM8580 driver registers itself as "wm8580" rather than "WM8580". Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-18Merge branch 'next-s3c64xx-device' into next-mergedBen Dooks
Conflicts: arch/arm/mach-s3c2440/mach-at2440evb.c
2008-12-15[ARM] SMDK6410: Add LCD (LCD48WVGA) definitionsBen Dooks
Add support for the LCD 48WVGA module attached to the SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] SMDK6410: Add availability of second hsmmc channelBen Dooks
Add SDHCI channel 1. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] S3C64XX: Fix missing definition of s3c64xx_init_io()Ben Dooks
The function s3c64xx_init_io was missing from <plat/cpu.h> and was masked by the SMDK6410 having an local definition. Fix by removing the SMDK6410 variant and adding it to the relevant <plat/cpu.h> file. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] SMDK6410: Add I2C device board informationBen Dooks
Add the I2C devices on the SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] SMDK6410: Add second I2C channel.Ben Dooks
Add the second I2C channel on the SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] SMDK6410: Add i2c deviceBen Dooks
Add i2c bus 0 to the configuration Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] SMDK6410: Add HSMMC0 deviceBen Dooks
Add HSMMC0 device to SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-15[ARM] SMDK6410: Initial machine supportBen Dooks
Initial machine support for the Samsung SMDK6410. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-17 23:24:24 +0000