aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc
AgeCommit message (Collapse)Author
2009-05-18i.MX31: Add support for the CPLD on PDK Debug board.Magnus Lilja
The i.MX31 PDK consists of several boards, one of them is a debug board containing a CPLD which controls some debug leds, switch buttons, an interrupt chip and an Ethernet controller. This patch adds support for detecting if the PDK board is present (during boot) and adds the interrupt chip to the kernel. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07mx31: changed CONSISTENT_DMA_SIZE to 8M for mx31 videoValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07mx31: remove gpio_request calls from iomux codeValentin Longchamp
Since iomux code is not directly related to gpio on mx31, the calls to gpio_request are removed from iomux.c file. These calls have to be done in platform initialization files. The name of the singe pin call for iomux is also changed to mxc_iomux_alloc_pin. Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07mxc: fix wrong register access in timer codeSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07i.MX31: Correct comments on CONFIG_DEBUG_LL.Magnus Lilja
Several comments in board config files stated "mandatory for CONFIG_LL_DEBUG" but the correct name is CONFIG_DEBUG_LL. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07i.MX31: Removed unused items from board-mx31lite.h.Magnus Lilja
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07mx31: define various pins used on mx31moboard (v2)Valentin Longchamp
As suggested by Sascha, I regroup them in a single patch so that the other patches become more orthogonal. changes since v1: changed I2C1 pin names Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07i.MX31: Add hw-random for RNGAAlan Carvalho de Assis
This hw-random driver add support to RNGA hardware found on some i.MX processors. Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07MX27: Add basic support to MX27PDKFabio Estevam
This patch adds basic support to MX27PDK board http://www.freescale.com/imx27pdk ). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07imx: re-work of PWM, add i.MX21 supportHolger Schurig
* Kconfig enables now HAVE_PWM (this enables in turn the selection of CONFIG_BACKLIGHT_PWM) * changes CONFIG_ARCH_MXyy to CONFIG_MACH_MXyy * fix some register names to match those of the reference manual * write a stub code so that the PWM can be used to program the LCD backlight * convert from #ifdef CONFIG_ARCH_MXxx to cpu_is_mxXX() * remove unneeded defines and fix 80-column "violations" of checkpatch.pl Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07MXC: mx21ads base supportIvo Clarysse
[PATCH v6] MXC: mx21ads base support Base machine support for the Freescale i.MX21ADS (M9328MX21ADSE) Application Development System. Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07mxc: emulate GPIO interrupt on both-edgesGuennadi Liakhovetski
MXC GPIO controller does not support generation of interrupts on both edges. Emulate this mode in software by reconfiguring the irq trigger polarity on each interrupt. This follows an example of drivers/mfd/asic3.c. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07imx: exit functions can/should be voidHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07mxc irq: make architecture runtime dependentSascha Hauer
Currently we depend on hardcoded base addresses for the interrupt controller. This prevents us from compiling in more than one i.MX architecture at a time. This patch changes the base address to a runtime calculated one. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07mxc timer: make compile time independentSascha Hauer
Currently we depend on hardcoded base addresses for the timer. This prevents us from compiling in more than one i.MX architecture at a time. This patch changes the base address to a runtime calculated one. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07MXC: rename mxc_map_io to architecture specific versionsSascha Hauer
This allows us to have more mapping functions for more than one i.MX architecture in the kernel. As this is the earliest board specific hook we have, also use it to set the cpu type. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07[ARM] MX35: Add PCM043 board supportSascha Hauer
The PCM043 is a i.MX35 based board from Phytec also known as the phyCORE-i.MX35. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07MX35: Add iomux pin defintionsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07MXC: Add iomux support for MX35 SoCsSascha Hauer
This iomux is called iomux-v3 in the tree because it is the third known incarnation of MXC iomuxers. It is not only found on the MX35 but also on the MX51 and probably others. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07MXC irq: remove unused definesSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05mx27ads: move PBC mapping out of vmalloc spaceUwe Kleine-König
Before this patch I got the following line in my dmesg: [ 0.000000] BUG: mapping for 0xd4000000 at 0xeb000000 overlaps vmalloc space VMALLOC_END is 0xf4000000 and there are the following other mappings defined for mx27ads: (0xa0500000,+0x00001000) maps to 0xffff0000 (0x10000000,+0x00100000) maps to 0xf4000000 (0x80000000,+0x00100000) maps to 0xf4100000 (0xd8000000,+0x00100000) maps to 0xf4200000 So map PBC to 0xf4300000. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05MXC: remove BUG_ON in interrupt handlerSascha Hauer
On i.MX31 I sometimes get spurious interrupts. There is no need to crash the whole system when this happens. Instead, silently ignore it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05mxc : BUG in imx_dma_requestMartin Fuzzey
On MX2 platforms imx_dma_request() calls request_irq() which may sleep with interrupts disabled. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-05mxc : Clean up properly when imx_dma_free() used without imx_dma_disable()Martin Fuzzey
The sequence imx_dma_request() imx_dma_enable() imx_dma_free() left the dma channel in_use mode and did not release the timer. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-21clocksource: pass clocksource to read() callbackMagnus Damm
Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-16Fix ifdef in plat-mxc/irc.cDarius Augulis
Move ifdef under function brackets. This fixes compile crach when IRQ priorities are disabled. Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
2009-04-16MXC: remove orphan imx_init_uart() definitionPaulius Zaleckas
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16mx31: pin definition for csiValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
2009-04-16MX31: pin definition for sdhc2Valentin Longchamp
This also adds the pins used on mx31moboard for WP and CD Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
2009-04-16MX31: Add I2C pin definitionsVladimir Barinov
Add I2C pin definitions for MX31 SoC Signed-off-by: Vladimir Barinov <vbarinov@embeddedalley.com>
2009-04-16MX31: Add more alternate pin definitionsSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-16imx21: activate i2cHolger Schurig
Set the correct clkdev-name for the i2c clock. It also get's rid of the ARCH_NR_GPIOS define on the rationale that isn't an ARCH-wide setting anyway. If a device has two pca953x devices, the reserved number will be wrong. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
2009-04-07Merge branch 'i2c-for-2630-v2' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds
* 'i2c-for-2630-v2' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c: imx: Make disable_delay a per-device variable i2c: xtensa s6000 i2c driver powerpc/85xx: i2c-mpc: use new I2C bindings for the Socates board i2c: i2c-mpc: make I2C bus speed configurable i2c: i2c-mpc: use dev based printout function i2c: i2c-mpc: various coding style fixes i2c: imx: Add missing request_mem_region in probe() i2c: i2c-s3c2410: Initialise Samsung I2C controller early i2c-s3c2410: Simplify bus frequency calculation i2c-s3c2410: sda_delay should be in ns, not clock ticks i2c: iMX/MXC support
2009-04-07i2c: iMX/MXC supportDarius Augulis
Implementation of I2C Adapter/Algorithm Driver for I2C Bus integrated in Freescale's i.MX/MXC processors. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-04-06V4L/DVB (11350): Add camera (CSI) driver for MX1Paulius Zaleckas
Add support for CMOS Sensor Interface on i.MX1 and i.MXL SoCs. create mode 100644 arch/arm/mach-mx1/ksym_mx1.c create mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S create mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h create mode 100644 drivers/media/video/mx1_camera.c Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10674): soc-camera: camera host driver for i.MX3x SoCsGuennadi Liakhovetski
Tested with 8 bit Bayer and 8 bit monochrome video. create mode 100644 arch/arm/plat-mxc/include/mach/mx3_camera.h create mode 100644 drivers/media/video/mx3_camera.c Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-27mxc: add arch_reset() functionIlya Yanok
This patch adds arch_reset() function for all mxc platforms. It also removes (unsused) arch/arm/mach-mx2/system.c file. This patch has been tested on i.MX1/27/31/35 Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-19[ARM] pass reboot command line to arch_reset()Russell King
OMAP wishes to pass state to the boot loader upon reboot in order to instruct it whether to wait for USB-based reflashing or not. There is already a facility to do this via the reboot() syscall, except we ignore the string passed to machine_restart(). This patch fixes things to pass this string to arch_reset(). This means that we keep the reboot mode limited to telling the kernel _how_ to perform the reboot which should be independent of what we request the boot loader to do. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-16Merge branch 'imx-fb-fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx into devel Conflicts: drivers/video/mx3fb.c
2009-03-13Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into develRussell King
Conflicts: arch/arm/mach-at91/gpio.c
2009-03-13qong: basic support for Dave/DENX QongEVB-LITE boardIlya Yanok
This patch adds basic support for Dave/DENX QongEVB-LITE i.MX31-based board. It includes support for clocks initialization, UART1, NOR-flash, FPGA-attached NAND flash and DNET ethernet controller (inside FPGA). Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13Use __force in IO_ADDRESS macro to silence sparseSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13MX31 clkdev supportSascha Hauer
This patch adds clkdev support for i.MX31. This is done in a similar way done previously for i.MX27 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MX35: add clock supportSascha Hauer
This patch adds clock support for i.MX35 SoCs. We do not support setting of clock rates yet, but most interesting clock rates should be reported. I couldn't test all clock rates and the datasheet contains some obvious bugs, so expect some bugs in this code. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: add cpu_is_ macrosSascha Hauer
We had hardcoded cpu_is_ macros for mxc architectures till now. As we want to run the same kernel on i.MX31 and i.MX35 this patch adds cpu_is_ macros which expand to 0 or 1 if only one architecture is compiled in and only check for the cpu type if more than one architecture is compiled in. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MX35: Add register definitions for the i.MX35Sascha Hauer
This patch moves the stuff common to i.MX31 and i.MX35 to mx3x.h and the specifics to mx31.h/mx35.h. We can build a kernel which runs on i.MX31 and i.MX35, so always include mx31.h and mx35.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mx31moboard: initial support for various baseboardsValentin Longchamp
This enables our mx31moboard to be used on the different baseboards that we are developping according to the application needs. There are not many differences between the boards for now, but when other peripherals are available for mx31 the differences are going to grow. v2: takes Sascha's comments into account Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mx31: add pin definition for LCDValentin Longchamp
Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mxc: first set GPIO level, then switch direction to outputGuennadi Liakhovetski
Make sure not to create spurious pulses on GPIOs, when configuring them as output: first set required level, then switch direction. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13arm/imx: Kconfig beautificationHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 16:12:59 +0000