aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/Kconfig
AgeCommit message (Collapse)Author
2008-10-09ARM: OMAP3: Add minimal omap3430 supportSyed Mohammed, Khasim
Add minimal omap3430 support based on earlier patches from Syed Mohammed Khasim. Also merge in omap34xx SRAM support from Karthik Dasu and use consistent naming for sram init functions. Also do following changes that make 34xx support usable: - Remove unused sram.c functions for 34xx - Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally in entry-macro.S - Update mach-omap2/io.c to support 2420, 2430, and 34xx - Also merge in 34xx GPMC changes to add fields wr_access and wr_data_mux_bus from Adrian Hunter - Remove memory initialization call omap2_init_memory() until until more generic memory initialization patches are posted. It's OK to rely on bootloader initialization until then. Signed-off-by: Syed Mohammed, Khasim <khasim@ti.com> Signed-off-by: Karthik Dasu<karthik-dp@ti.com> Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain codePaul Walmsley
This patch creates an interface to the clockdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. The patch also adds clockdomain usecount tracking. This is intended to be called whenever the first clock in a clockdomain is enabled, or when the last enabled clock in a clockdomain is disabled. If the clockdomain is in software-supervised mode, the code will force-wakeup or force-sleep the clockdomain. If the clockdomain is in hardware-supervised mode, the first clock enable will add sleep and wakeup dependencies on a user-selectable set of parent domains (usually MPU & IVA2), and the disable will remove them. Each clockdomain will be defined in later patches as static structures. The clockdomain structures are linked into a list at boot by clkdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_CLOCKDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain codePaul Walmsley
This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-20ARM: OMAP: Fix clockevent support for hrtimersKevin Hilman
One-shot mode was broken in MPU-timer support for OMAP1 due to a typo. Also, ensure timer is stopped before changing the auto-reload flag. The TRM says changing the AR flag when timer is running is undefined. Also set GENERIC_CLOCKEVENTS for all omaps. Signed-off-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20ARM: OMAP: abstract debug card setup (smc, leds)David Brownell
Additional cleanup for debug boards on H2/P2/H3/H4: move the init code that's not board-specific into a new file where it can be easily shared between all the different boards (avoiding code duplication, and making it easier to support more devices). Make H4 use that. This should be easy to drop in to the OMAP1 boards using these debug cards; the only difference seems to be that the p2 does an extra reset of the smc using the fpga (probably all boards could do that, if it's necessary) and doesn't use the gpio mux or request APIs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-05-09Merge branches 'armv7', 'at91', 'misc' and 'omap' into develRussell King
2007-05-08ARM: OMAP: Sync core code with linux-omapTony Lindgren
This patch syncs omap specific core code with linux-omap. Most of the changes are needed to fix bitrot caused by driver updates in linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08ARM: OMAP: h4 must have blinky leds!!David Brownell
This adds generic support for the "debug board" LEDs used by most of TI's OMAP reference boards, and board-specific support for the H4. It's derived from the not-as-generic stuff used by OMAP1 H2/H3/P2. Those should be able to switch easily to this version, and clean up some of the omap1-specific code. In addition to H4 support, one key improvement is supporting not just the "old" ARM debug LED API (with timer and idle LEDs, plus four that can be handy for kernel debugging), but it also supports the "new" generic LED API (most useful for usermode stuff IMO). Either or both APIs can be enabled. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21[ARM] 4262/1: OMAP: clocksource and clockevent supportKevin Hilman
Update OMAP1 to enable support for hrtimers and dynticks by using new clocksource and clockevent infrastructure. Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-12kconfig: Standardize "depends" -> "depends on" in Kconfig filesRobert P. J. Day
Standardize the miniscule percentage of occurrences of "depends" in Kconfig files to "depends on", and update kconfig-language.txt to reflect that. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26ARM: OMAP: Port dmtimers to OMAP2 and implement PWM supportTimo Teras
Port dmtimer framework to OMAP2. Modify the dmtimers API to support setting of PWM configuration and prescaler. Convert 32 kHz timer and GP timer to use the dmtimer framework. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-04-02[ARM] 3427/1: ARM: OMAP: 2/8 Update timersTony Lindgren
Patch from Tony Lindgren Update OMAP timers from linux-omap tree. The highlights of the patch are: - Move timer32k code from mach-omap1 to plat-omap and make it work also on omap24xx by Tony Lindgren - Add support for dmtimer idle check for PM by Tuukka Tikkanen Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13[ARM] Remove useless 'default n' from Kconfig filesRussell King
The default is already 'n' so there's no need to explicitly state it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07[ARM] 2887/1: OMAP 2/4: Update files common to omap1 and omap2, take 2Tony Lindgren
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Clock updates by Tuukka Tikkanen, Juha Yrjola, Daniel Petrini and Tony Lindgren - DMA fixes by Imre Deak, Juha Yrjola and Daniel Petrini - Add support to dual-mode hardware timers by Lauri Leukkunen - GPIO support for 24xx by Paul Mundt - GPIO wake-up support by Tony Lindgren - Better GPIO interrupt handler to not lose interrupts by Ralph Walden and Ladislav Michl - Power Management updates by Tuukka Tikkanen - Make Power Management code use new SRAM functions by Tony Lindgren Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2804/1: OMAP update 9/11: Update OMAP arch filesTony Lindgren
Patch from Tony Lindgren This patch by various OMAP developers syncs the OMAP specific arch files with the linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2812/1: OMAP update 7c/11: Move arch-omap to plat-omapTony Lindgren
Patch from Tony Lindgren This patch move common OMAP code from arch-omap to plat-omap directory. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>