aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/gpio.c
AgeCommit message (Collapse)Author
2006-11-30[ARM] Remove compatibility layer for ARM irqsRussell King
set_irq_chipdata -> set_irq_chip_data get_irq_chipdata -> get_irq_chip_data do_level_IRQ -> handle_level_irq do_edge_IRQ -> handle_edge_irq do_simple_IRQ -> handle_simple_irq irqdesc -> irq_desc irqchip -> irq_chip Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-06Initial blind fixup for arm for irq changesLinus Torvalds
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-25[PATCH] ARM: OMAP: Check gpio_fck not gpio_ickKomal Shah
Check gpio_fck not gpio_ick. Signed-off-by: Komal Shah <komal_shah802003@yahoo.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: GPIO: IRQSTATUS2 workaround for retention stateHiroshi DOYU
In OMAP2420, an incoming GPIO interrupt always sets both GPIO_IRQSTATUS1 and GPIO_IRQSTATUS2, even if the relevant bit is disabled in GPIO_IRQENABLE1/2 and DSP doesn't use GPIO at all. GPIO_IRQSTATUS1 is for MPU and GPIO_IRQSTATUS2 is for DSP. If IRQSTATUS is set, this will prevent the system from going to idle state. This patch also clears IRQSTATUS2 to avoid the above situation. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Fix typo for 24xx GPIO resumeTony Lindgren
Fix typo for 24xx GPIO resume Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Remove Remove superfluous/recursive locking for GPIODavid Brownell
Remove Remove superfluous/recursive locking for GPIO Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Reset GPIO irq state after free_irq()Tony Lindgren
This is needed to reset GPIO after free_irq(). Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Fix OMAP1 compilation after MPUIO check changeJonathan McDowell
The recent MPUIO range change fix breaks compilation if CONFIG_ARCH_OMAP24XX isn't defined; it should be OMAP_MAX_GPIO_LINES not MAX_GPIO_LINES I believe. This one liner fixes it. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: GPIO: fix MPUIO checkImre Deak
- MPUIO doesn't exist on OMAP2 - no error was returned for too big MPUIO numbers Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-08-01[ARM] 3739/1: genirq updates: irq_chip, add and use irq_chip.nameDavid Brownell
Patch from David Brownell ARM genirq cleanups/updates: - Start switching platforms to newer APIs * use "irq_chip" name, not "irqchip" * providing irq_chip.name - Show irq_chip.name in /proc/interrupts, like on x86. This update a bit more than half of the ARM code. The irq_chip.name values were chosen to match docs (if I have them) or be otherwise obvious ("FPGA", "CPLD", or matching the code). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02[PATCH] genirq: Fixup ARM devel mergeThomas Gleixner
ARM devel merge introduced new machine functionality which was not covered by the ARM -> genirq patches. Fix it up and make it compile again. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02Merge branch 'genirq' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits) [ARM] 3683/2: ARM: Convert at91rm9200 to generic irq handling [ARM] 3682/2: ARM: Convert ixp4xx to generic irq handling [ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling [ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling [ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling [ARM] 3698/1: ARM: Convert sa1100 to generic irq handling [ARM] 3697/1: ARM: Convert shark to generic irq handling [ARM] 3696/1: ARM: Convert clps711x to generic irq handling [ARM] 3694/1: ARM: Convert ecard driver to generic irq handling [ARM] 3693/1: ARM: Convert omap1 to generic irq handling [ARM] 3691/1: ARM: Convert imx to generic irq handling [ARM] 3688/1: ARM: Convert clps7500 to generic irq handling [ARM] 3687/1: ARM: Convert integrator to generic irq handling [ARM] 3685/1: ARM: Convert pxa to generic irq handling [ARM] 3684/1: ARM: Convert l7200 to generic irq handling [ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling [ARM] 3680/1: ARM: Convert footbridge to generic irq handling [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes ... Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless code).
2006-07-02Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 3541/2: workaround for PXA27x erratum E7 [ARM] nommu: provide a way for correct control register value selection [ARM] 3705/1: add supersection support to ioremap() [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency [ARM] 3703/1: Add help description for ARCH_EP80219 [ARM] 3678/1: MMC: Make OMAP MMC work [ARM] 3677/1: OMAP: Update H2 defconfig [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1 [ARM] Add section support to ioremap [ARM] Fix sa11x0 SDRAM selection [ARM] Set bit 4 on section mappings correctly depending on CPU [ARM] 3666/1: TRIZEPS4 [1/5] core ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ...
2006-07-01[ARM] 3701/1: ARM: Convert plat-omap to generic irq handlingThomas Gleixner
Patch from Thomas Gleixner From: Thomas Gleixner <tglx@linutronix.de> Fixup the conversion to generic irq subsystem. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26ARM: OMAP: Fix GPIO IRQ mask handlingImre Deak
The GPIO IRQ mask was retrieved incorrectly in cases where we have a mask register instead of an enable register. Also we should only return the valid bits depending on the bank size. This fixes a bug on 1510/1610 based OMAPs where GPIO IRQs are not delivered. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: GPIO IRQ lazy IRQ disable fixImre Deak
- The current OMAP GPIO IRQ framework doesn't use the do_edge_IRQ, do_level_IRQ handlers, but instead calls do_simple_IRQ. This doesn't handle disabled interrupts properly, so drivers will still get interrupts after calling disable_irq. The patch solves this by respecting the irq_desc.disable_depth and irq_desc.running counters. When one of these is non-zero the handler is not called, the interrupt is masked and marked as pending. The pending interrupt will be serviced when the running handler returns. This is according to the same semantics as the standard do_edge_IRQ and do_level_IRQ handlers have, so one day we should use them instead of do_simple_IRQ. - Process only interrupts that are not masked. The ISR may contain pending interrupts that are masked these shouldn't be processed. - Move the bank IRQ unmasking out of the IRQ dispatch loop. If there are further iterations we shouldn't unmask it if there are level triggered interrupts pending. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-04-02[ARM] 3429/1: ARM: OMAP: 4/8 Update GPIOTony Lindgren
Patch from Tony Lindgren Update OMAP GPIO code from linux-omap tree: - Fix omap16xx edge control by Juha Yrjola - Support for additional omap16xx trigger modes by Dirk Behme - Fix edge detection by Tony Lindgren et al. - Better support for omap15xx and omap310 by Andrej Zaborowski - Fix omap15xx interrupt bug by Petukhov Nikolay Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-17ARM: OMAP: 4/4 Fix clock framework to use clk_enable/disable miscTony Lindgren
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-07[ARM] Move asm/hardware/clock.h to linux/clk.hRussell King
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3142/1: OMAP 2/5: Update files common to omap1 and omap2Tony Lindgren
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Serial port and framebuffer init improvments by Imre Deak - Common omap pin mux framework by Tony Lindgren - Common omap clock framework by Tony Lindren Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07[ARM] 2887/1: OMAP 2/4: Update files common to omap1 and omap2, take 2Tony Lindgren
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Clock updates by Tuukka Tikkanen, Juha Yrjola, Daniel Petrini and Tony Lindgren - DMA fixes by Imre Deak, Juha Yrjola and Daniel Petrini - Add support to dual-mode hardware timers by Lauri Leukkunen - GPIO support for 24xx by Paul Mundt - GPIO wake-up support by Tony Lindgren - Better GPIO interrupt handler to not lose interrupts by Ralph Walden and Ladislav Michl - Power Management updates by Tuukka Tikkanen - Make Power Management code use new SRAM functions by Tony Lindgren Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-04[ARM] Wrap calls to descriptor handlersRussell King
This is part of Thomas Gleixner's generic IRQ patch, which converts ARM to use the generic IRQ subsystem. Here, we wrap calls to desc->handler() in an inline function, desc_handle_irq(). This reduces the size of Thomas' patch since the changes become more localised. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2812/1: OMAP update 7c/11: Move arch-omap to plat-omapTony Lindgren
Patch from Tony Lindgren This patch move common OMAP code from arch-omap to plat-omap directory. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-19 15:30:00 +0000