aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/include
AgeCommit message (Collapse)Author
2009-01-29ARM: OMAP: Fix hsmmc init, v2Tony Lindgren
The naming accidentally broke while changing the name for the driver to not to conflict with the other mmc driver. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-29ARM: OMAP: Fix omap34xx revision detection for ES3.1Tony Lindgren
Fix omap34xx revision detection for ES3.1 Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-29ARM: OMAP: Fix McBSP spin_lock deadlockStanley.Miao
A spin_lock deadlock will occur when omap_mcbsp_request() is invoked. omap_mcbsp_request() \- clk_enable(mcbsp->clk) [takes and holds clockfw_lock] \- omap2_clk_enable() \- _omap2_clk_enable() \- omap_mcbsp_clk_enable() \- clk_enable(child clock) [tries for clockfw_lock again] mcbsp_clk is a virtual clock and it comprises several child clocks. when enable mcbsp_clk in omap_mcbsp_request(), the enable function of mcbsp_clk will enable its child clocks, then the deadlock occurs. The solution is to remove the virtual clock and enable these child clocks in omap_mcbsp_request() directly. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-15ARM: OMAP: Fix compile for h3 MMCTony Lindgren
Fix compile for h3 MMC Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-15ARM: OMAP: Remove unused platform devices, v3Tony Lindgren
This patch removes old platform devices. Alsa should now be using the ASoC driver. For boards not yet using ASoC, please see sound/soc/omap/osk5912.c. Add dummy aic23_power_up and aic23_power_down functions for 770 to keep things compiling. Remove references to omap_gpio_switch, and unused h2_nand_dev_ready function. This patch is based on an earlier patch by Arun KS. Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Arun KS <arunks@mistralsolutions.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-15ARM: OMAP: Fix ASoC by enabling writes to XCCR and RCCR McBSP registers, v3Tony Lindgren
This patch enables writing to McBSP Transmit Configuration Control Register (XCCR) and Receive Configuration Control Register (RCCR) for 2430/34xx platforms. It also adds XCCR, RCCR entries in McBSP register configuration structure and bit definitions for both registers. If we enable the writing to CCR registers for 2430/34xx and don't set the default values (setting 0 as a consequence) in ASoC driver, the Transmit/Receive DMA mode gets disabled and the the transmission/reception doesn't happen, ending with a "write error: Input/Output error" when playing with 'aplay'. Also define dummy CCR registers for omap1. Cc: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-15ARM: OMAP: Fix gpio by switching to generic gpio calls, v2Jarkko Nikula
Fix compile by removing remaining omap specific gpio calls. Based on earlier patches by Jarkko Nikula. Also remove old GPIO key code, there is already a patch to do this with gpio_keys. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-01-06arm: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-17Merge branch 'hsmmc-init' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-15Merge branch 'omap3-upstream' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-10omap mmc: Add low-level initialization for hsmmc controllerTony Lindgren
Add low-level initialization for hsmmc controller. Merged into this patch patch are various improvments and board support by Grazvydas Ignotas and David Brownell. Also change wire4 to be wires, as some newer controllers support 8 data lines. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10omap mmc: Add better MMC low-level initTony Lindgren
This will simplify the MMC low-level init, and make it more flexible to add support for a newer MMC controller in the following patches. The patch rearranges platform data and gets rid of slot vs controller confusion in the old data structures. Also fix device id numbering in the clock code. Some code snippets are based on an earlier patch by Russell King <linux@arm.linux.org.uk>. Cc: Pierre Ossman <drzeus-mmc@drzeus.cx> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: Pin multiplexing updates for 24xx and 34xxArun KS
This patch adds some new pin multiplexing options for McBSP and McSPI from Arun KS. Also add two more GPIOs from David Brownell. Also mark omap24xx_cfg_reg() static. Signed-off-by: Arun KS <arunks@mistralsolutions.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP3: LDP: Add Ethernet device support to make ldp boot succeessStanley.Miao
Add Ethernet device support in board-ldp.c to make ldp can boot and mount nfs successfully. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com>
2008-12-10ARM: OMAP2: Use omap_rev() instead of system_revLauri Leukkunen
system_rev is meant for board revision, this patch changes all relevant instances to use the new omap_rev() function liberating system_rev to be used with ATAG_REVISION as it has been designed. Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP2: Fix cpu detectionTony Lindgren
At some point omap2 changed the bits for GET_OMAP_CLASS, which broke 15xx detection on 730 as noticed by Russell King. This patch fixes omap2 cpu detection to respect the original GET_OMAP_CLASS, and simplifies the detection for 34xx. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: make legacy gpio request/free calls superfluousJarkko Nikula
Clean up OMAP GPIO request/free functions - Rename and declare static OMAP specific GPIO request/free functions - Register them into gpiolib as chip-specific hooks - Add omap_request_gpio/omap_free_gpio wrappers for existing code not converted yet to use gpiolib Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> [ dbrownell@users.sourceforge.net: remove needless check_gpio() calls ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: switch to gpio_direction_outputDavid Brownell
More conversion to the standard GPIO interfaces: stop using omap_set_gpio_direction() entirely, and switch over to the gpio_direction_output() call. Note that because gpio_direction_output() includes the initial value, this change isn't quite transparent. - For the call sites which defined an initial value either before or after setting the direction, that value was used. When that value was previously assigned afterwards, this could eliminate a brief output glitch ... and possibly change behavior. In a few cases (LCDs) several values were assigned together ... those were re-arranged to match the explicit sequence provided. - Some call sites didn't define such a value; so I chose an initial "off/reset" value that seemed to default to "off". In short, files touched by this patch might notice some small changes in startup behavior (with trivial fixes). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: switch to standard gpio get/set callsDavid Brownell
This patch replaces some legacy OMAP GPIO calls with the "new" (not really, any more!) calls that work on most platforms. The calls addressed by this patch are the simple ones to get and set values ... for code that's in mainline, including the implementations of those calls. Except for the declarations and definitions of those calls, all of these changes were performed by a simple SED script. Plus, a few "if() set() else set()" branches were merged by hand. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP: gpios implement new to_irq()David Brownell
Make OMAP use the new __gpio_to_irq() hook, to make it easier to support IRQs coming in from off-chip gpio controllers like the TWL4030/TPS65930 chip used on OMAP3 boads like Beagleboard.org and the Gumstix Overo. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-01[ARM] omap: fix a pile of issuesRussell King
This patch fixes a number of sillies, from missing 'const' to using 'return' in void functions, to functions with no arguments not even 'void' and a cast which isn't required. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-30[ARM] Add a common typesafe __io implementationRussell King
As Al did for Versatile in 2ad4f86b60b649fd7428265c08d73a3bd360c81b, add a typesafe __io implementation for platforms to use. Convert platforms to use this new simple typesafe implementation. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-28[ARM] remove a common set of __virt_to_bus definitionsNicolas Pitre
Let's provide an overridable default instead of having every machine class define __virt_to_bus and __bus_to_virt to the same thing. What most platforms are using is bus_addr == phys_addr so such is the default. One exception is ebsa110 which has no DMA what so ever, so the actual definition is not important except only for proper compilation. Also added a comment about the special footbridge bus translation. Let's also remove comments alluding to set_dma_addr which is not (and should not) be commonly used. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-11-25ARM: OMAP: Typo fix for clock_allow_idleAmit Kucheria
The second clk_deny_idle instance should be clk_allow_idle instead. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04ARM: OMAP: Fix define for twl4030 irqsTony Lindgren
Otherwise twl4030 gpios won't work. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-11-04ARM: OMAP: Fix get_irqnr_and_base to clear spurious interrupt bitsTony Lindgren
On omap24xx, INTCPS_SIR_IRQ_OFFSET bits [6:0] contains the current active interrupt number. However, on 34xx INTCPS_SIR_IRQ_OFFSET bits [31:7] also contains the SPURIOUSIRQFLAG, which gets set if the interrupt sorting information is invalid. If the SPURIOUSIRQFLAG bits are not ignored, the interrupt code will occasionally produce a bunch of confusing errors: irq -33, desc: c02ddcc8, depth: 0, count: 0, unhandled: 0 ->handle_irq(): c006f23c, handle_bad_irq+0x0/0x22c ->chip(): 00000000, 0x0 ->action(): 00000000 Fix this by masking out only the ACTIVEIRQ bits. Also fix a confusing comment. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-20Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (69 commits) Revert "[MTD] m25p80.c code cleanup" [MTD] [NAND] GPIO driver depends on ARM... for now. [MTD] [NAND] sh_flctl: fix compile error [MTD] [NOR] AT49BV6416 has swapped erase regions [MTD] [NAND] GPIO NAND flash driver [MTD] cmdlineparts documentation change - explain where mtd-id comes from [MTD] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection [MTD] [NAND] Fix compilation warnings in drivers/mtd/nand/cs553x_nand.c [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash [MTD] mtdoops: Fix a bug where block may not be erased [MTD] mtdoops: Add a magic number to logged kernel oops [MTD] mtdoops: Fix an off by one error [JFFS2] Correct parameter names of jffs2_compress() in comments [MTD] [NAND] sh_flctl: add support for Renesas SuperH FLCTL [MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly written [MTD] [MAPS] Remove unused variable after ROM API cleanup. [MTD] m25p80.c extended jedec support (v2) [MTD] remove unused mtd parameter in of_mtd_parse_partitions() [MTD] [NAND] remove dead Kconfig associated with !CONFIG_PPC_MERGE [MTD] [NAND] driver extension to support NAND on TQM85xx modules ...
2008-10-15Merge branch 'fixes' into for-linusRussell King
Conflicts: arch/arm/mach-versatile/core.c
2008-10-14Merge branch 'omap-all' into develRussell King
Conflicts: arch/arm/mach-omap2/gpmc.c arch/arm/mach-omap2/irq.c
2008-10-14[ARM] 5301/1: ARM: OMAP: Add missing irq definesTony Lindgren
Some McBSP irq defines were missing that should have been added with the earlier McBSP patches. Add the missing McBSP irqs, and a few other missing irqs as defined in linux-omap tree. Also add a blank line to separate irq defines from the irq line calculations. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits) [ARM] 5300/1: fixup spitz reset during boot [ARM] 5295/1: make ZONE_DMA optional [ARM] 5239/1: Palm Zire 72 power management support [ARM] 5298/1: Drop desc_handle_irq() [ARM] 5297/1: [KS8695] Fix two compile-time warnings [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores. [ARM] pxa: allow multi-machine PCMCIA builds [ARM] pxa: add preliminary CPUFREQ support for PXA3xx [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c [ARM] pxa/zylonite: add support for USB OHCI [ARM] ohci-pxa27x: use ioremap() and offset for register access [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph() [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c [ARM] pxa: simplify DMA register definitions [ARM] pxa: make additional DCSR bits valid for PXA3xx [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c ... Fixed up conflicts in arch/arm/mach-versatile/core.c sound/soc/pxa/pxa2xx-ac97.c sound/soc/pxa/pxa2xx-i2s.c manually.
2008-10-10Merge branch 'omap3-upstream' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into omap-all
2008-10-10ALSA: Correct Vladimir Barinov's e-mail addressVladimir Barinov
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ARM: OMAP3: Add basic board support for OMAP LDPNishant Kamat
This adds minimal board support for the OMAP3430 LDP development platform. Signed-off-by: Nishant Kamat <nskamat@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-09Merge branch 'ptebits' into develRussell King
Conflicts: arch/arm/Kconfig
2008-10-09Merge branch 'omap2-upstream' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into omap-all
2008-10-09ARM: OMAP3: Add support for the Gumstix Overo board (rev 3)Steve Sakoman
This patch adds minimal overo support. Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-09ARM: OMAP3: Add minimal Beagle board supportSyed Mohammed, Khasim
Add minimal Beagle board support. Based on earlier patches by Syed Mohammed Khasim with some fixes from linux-omap tree. Signed-off-by: Syed Mohammed Khasim <khasim@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-09ARM: OMAP3: Add minimal omap3430 supportSyed Mohammed, Khasim
Add minimal omap3430 support based on earlier patches from Syed Mohammed Khasim. Also merge in omap34xx SRAM support from Karthik Dasu and use consistent naming for sram init functions. Also do following changes that make 34xx support usable: - Remove unused sram.c functions for 34xx - Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally in entry-macro.S - Update mach-omap2/io.c to support 2420, 2430, and 34xx - Also merge in 34xx GPMC changes to add fields wr_access and wr_data_mux_bus from Adrian Hunter - Remove memory initialization call omap2_init_memory() until until more generic memory initialization patches are posted. It's OK to rely on bootloader initialization until then. Signed-off-by: Syed Mohammed, Khasim <khasim@ti.com> Signed-off-by: Karthik Dasu<karthik-dp@ti.com> Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-08ARM: OMAP: Add support for OMAP2430 in McBSPJarkko Nikula
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-08ARM: OMAP: Add support for McBSP devices 3 - 5 on 34xxChandra Shekhar
Based on Chandra's earlier patches in linux-omap tree. Signed-off-by: Chandra Shekhar <x0044955@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-08ARM: OMAP: Allocate McBSP devices dynamicallyChandra Shekhar
Based on Chandra's earlier patches in linux-omap tree. Note that omap1_mcbsp_check and omap2_mcbsp_check are no longer needed as there's now omap_mcbsp_check_valid_id() defined. Also some functions can now be marked __init. Signed-off-by: Chandra Shekhar <x0044955@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-06ARM: OMAP2: Misc updates from linux-omap treeTony Lindgren
Misc updates from linux-omap tree, mostly to update common device initialization and add missing defines from linux-omap tree. Also some changes to make room for adding 34xx in following patches. Note that the I2C resources are now set up in arch/arm/plat-omap/i2c.c helper, and can be removed from devices.c. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-06ARM: OMAP2: Fix sparse, checkpatch warnings fro GPMC code, use ioremapPaul Walmsley
Fix sparse, checkpatch warnings fro GPMC code. Also change to use ioremap, and add missing function prototypes to gpmc.h. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-06ARM: OMAP2: Add pinmux support for omap34xxVikram Pandita
This patch adds pinmux support for OMAP3. Incorporated review comments from Tony to make mux_value as bit mask. Tested on 3430SDP. Also merge in adding of I2C pins from Jarkko Nikula. Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-06ARM: OMAP2: Use omap_globals for CPU detection for multi-omapTony Lindgren
This allows to get rid of the ifdefs and will allow simpler CPU detection in the future. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-06ARM: OMAP2: Move sleep.S into sleep24xx.STony Lindgren
Some register offsets are different for 242x and 243x. This will allow compiling sleep code for both chips into the same kernel. Pass the addresses for SDRC_DDLA_CTRL and SDRC_POWER to the omap24xx_cpu_suspend instead of loading the values since the only. Also fix a bug to call omap2_sram_suspend with the value of SDRC_DLLA_CTRL instead of the address as that's what omap24xx_cpu_suspend expects to determine between DDR and SDR. This bug has not been noticed as the boards seem to have DDR instead of SDR. Note that some PM patches are still missing. The PM patches will be added later on once the base files are in sync with linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-06ARM: OMAP2 Provide function to enable/disable uart clocksJouni Hogander
This patch adds common function to enable/disable omap2/3 uart clocks. Enabled uarts are passed by bootloader in atags and clocks for these enabled uarts are touched. Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-10-03Merge unstable branch 'omap-rmk'Russell King
Merge branch 'omap-rmk' into omap-all
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>