aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/sram.c
AgeCommit message (Collapse)Author
2009-10-06omap: SRAM: flush the right address after memcpy in omap_sram_pushye janboe
the original flush operation is to flush the function address which is copied from. But we do not change the function code and it is not necessary to flush it. Signed-off-by: janboe <janboe.ye@gmail.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS insteadTony Lindgren
Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS, and convert omap_read/write into a functions instead of a macros. Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE. In the long run, most code should use ioremap + __raw_read/write instead. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-10Merge branch 'omap_fixes_31' of git://git.pwsan.com/linux-2.6Russell King
2009-08-10OMAP3: Fix omap3 sram virtual addres overlap vmalloc space after increasing ↵Janboe Ye
vmalloc size commit e85c205ac1427f2405021a36f083280ff0d0a35e increase vmalloc size. vmalloc space will overlap with OMAP3 sram virtual address. Signed-off-by: Li Hong Mei <hong-mei.li@motorola.com> Signed-off-by: Janboe Ye <yuan-bo.ye@motorola.com> Reviewed-by: Paul Walmsley <paul@pwsan.com>
2009-07-24OMAP3 SDRC: add support for 2 SDRAM chip selectsJean Pihet
Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2 SDRAM parts connected to the SDRC. This patch adds the following: - add a new argument of type omap_sdrc_params struct* to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params - adapted the OMAP boards files to the new prototype of omap2_init_common_hw - add the SDRC 2nd CS registers offsets defines - adapt the sram sleep code to configure the SDRC for the 2nd CS Note: If the 2nd param to omap2_init_common_hw is NULL, then the parameters are not programmed into the SDRC CS1 registers Tested on 3430 SDP and Beagleboard rev C2 and B5, with suspend/resume and frequency changes (cpufreq). Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-23OMAP3: SRAM size fix for HS/EMU devicesTero Kristo
SRAM size fix for HS/EMU devices Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-06-19OMAP3: Add support for DPLL3 divisor values higher than 2Tero Kristo
Previously only 1 and 2 was supported. This is needed for DVFS VDD2 control. Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
2009-06-19OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock changePaul Walmsley
Program the SDRC_MR_0 register as well during SDRC clock changes. This register allows selection of the memory CAS latency. Some SDRAM chips, such as the Qimonda HYB18M512160AF6, have a lower CAS latency at lower clock rates. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-06-19OMAP3 clock: add a short delay when lowering CORE clk ratePaul Walmsley
When changing the SDRAM clock from 166MHz to 83MHz via the CORE DPLL M2 divider, add a short delay before returning to SDRAM to allow the SDRC time to stabilize. Without this delay, the system is prone to random panics upon re-entering SDRAM. This time delay varies based on MPU frequency. At 500MHz MPU frequency at room temperature, 64 loops seems to work okay; so add another 32 loops for environmental and process variation. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-05-28Merge branch 'omap4' into for-nextTony Lindgren
2009-05-28Merge branch 'omap-upstream' into for-nextTony Lindgren
Conflicts: arch/arm/mach-omap2/Makefile
2009-05-28ARM: OMAP4: Add minimal support for omap4Santosh Shilimkar
This patch adds the support for OMAP4. The platform and machine specific headers and sources updated for OMAP4430 SDP platform. OMAP4430 is Texas Instrument's SOC based on ARM Cortex-A9 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and SCU for cache coherency. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-26Merge branch 'omap-clock-upstream' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren
for-next
2009-05-25ARM: OMAP: Remove useless omap_sram_error function.Santosh Shilimkar
This patch removes fixes omap_sram_error() function and replace the error paths with BUG_ON. The proposed fix was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP: Increase VMALLOC_END to allow 256MB RAMMans Rullgard
This increases VMALLOC_END to 0x18000000, making room for 256MB RAM with the default 128MB vmalloc region. Note that after this patch there's no longer a hole between vmalloc space and the beginning of IO space on omap2 as the first virtual mapping starts at 0xd8000000. Also fold in a related change from Paul Walmsley <paul@pwsan.com> to change the OMAP2_SRAM addresses accordingly. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-25ARM: OMAP: Remove useless omap_sram_error function.Santosh Shilimkar
This patch removes fixes omap_sram_error() function and replace the error paths with BUG_ON. The proposed fix was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-05-12OMAP3 clock: only unlock SDRC DLL if SDRC clk < 83MHzPaul Walmsley
According to the 34xx TRM Rev. K section 11.2.4.4.11.1 "Purpose of the DLL/CDL Module," the SDRC delay-locked-loop can be locked at any SDRC clock frequency from 83MHz to 166MHz. CDP code unconditionally unlocked the DLL whenever shifting to a lower SDRC speed, but this seems unnecessary and error-prone, as the DLL is no longer able to compensate for process, voltage, and temperature variations. Instead, only unlock the DLL when the SDRC clock rate would be less than 83MHz. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-05-12OMAP3 SRAM: mark OCM RAM as Non-cacheable Normal memoryPaul Walmsley
Mark the SRAM (aka OCM RAM) as Non-cacheable Normal memory[1]. This is to prevent the ARM from evicting existing cache lines to SDRAM while code is executing from the SRAM. Necessary since one of the primary uses for the SRAM is to hold the code and data for the CORE DPLL M2 divider reprogramming code, which must execute while the SDRC is idled. If the ARM attempts to write cache lines back to the while the SRAM code is running, the ARM will stall[2]. TI deals with this problem in the CDP kernel by marking the SRAM as Strongly-ordered memory. Tero Kristo <tero.kristo@nokia.com> caught a bug in an earlier version of this patch - thanks Tero. ... 1. ARMv7 ARM (DDI 0406A) pp. A3-30, A3-31, B3-32. 2. Private communication with Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
2009-03-23[OMAP850] Changes to memory subsystemZebediah C. McClure
Changes to memory subsystem. Signed-off-by: Zebediah C. McClure <zmc@lurian.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-10ARM: OMAP2: Use omap_rev() instead of system_revLauri Leukkunen
system_rev is meant for board revision, this patch changes all relevant instances to use the new omap_rev() function liberating system_rev to be used with ATAG_REVISION as it has been designed. Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-12-01[ARM] omap: fix a pile of issuesRussell King
This patch fixes a number of sillies, from missing 'const' to using 'return' in void functions, to functions with no arguments not even 'void' and a cast which isn't required. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-14Merge branch 'omap-all' into develRussell King
Conflicts: arch/arm/mach-omap2/gpmc.c arch/arm/mach-omap2/irq.c
2008-10-09ARM: OMAP3: Add minimal omap3430 supportSyed Mohammed, Khasim
Add minimal omap3430 support based on earlier patches from Syed Mohammed Khasim. Also merge in omap34xx SRAM support from Karthik Dasu and use consistent naming for sram init functions. Also do following changes that make 34xx support usable: - Remove unused sram.c functions for 34xx - Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally in entry-macro.S - Update mach-omap2/io.c to support 2420, 2430, and 34xx - Also merge in 34xx GPMC changes to add fields wr_access and wr_data_mux_bus from Adrian Hunter - Remove memory initialization call omap2_init_memory() until until more generic memory initialization patches are posted. It's OK to rely on bootloader initialization until then. Signed-off-by: Syed Mohammed, Khasim <khasim@ti.com> Signed-off-by: Karthik Dasu<karthik-dp@ti.com> Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-09-06[ARM] Convert asm/io.h to linux/io.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-03ARM: OMAP: SRAM: Split sram24xx.S into sram242x.S and sram243x.STony Lindgren
Split sram24xx.S into sram242x.S and sram243x.S Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-05-20[ARM] spelling fixesSimon Arlott
Spelling fixes in arch/arm/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-09ARM: OMAP: FB sync with N800 tree (support for dynamic SRAM allocations)Imre Deak
- in addition to fixed FB regions - as passed by the bootloader - allow dynamic allocations - do some more checking against overlapping / reserved regions - move the FB specific parts out from sram.c to fb.c Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08ARM: OMAP: Sync core code with linux-omapTony Lindgren
This patch syncs omap specific core code with linux-omap. Most of the changes are needed to fix bitrot caused by driver updates in linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25ARM: OMAP: 2420 boot BUG(): failure to map SRAMKevin Hilman
ARM: OMAP: Fix SRAM static mapping for EMU devices. Fix SRAM static mapping for EMU devices. Signed-off-by: Kevin Hilman <khilman@deeprooted.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-07-02Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 3541/2: workaround for PXA27x erratum E7 [ARM] nommu: provide a way for correct control register value selection [ARM] 3705/1: add supersection support to ioremap() [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency [ARM] 3703/1: Add help description for ARCH_EP80219 [ARM] 3678/1: MMC: Make OMAP MMC work [ARM] 3677/1: OMAP: Update H2 defconfig [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1 [ARM] Add section support to ioremap [ARM] Fix sa11x0 SDRAM selection [ARM] Set bit 4 on section mappings correctly depending on CPU [ARM] 3666/1: TRIZEPS4 [1/5] core ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ...
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICETony Lindgren
MT_MEMORY is needed in order to execute code in SRAM. Also need to use section mapping. Based on a patch by Richard Woodruff. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-04-02[ARM] 3430/1: ARM: OMAP: 5/8 Update PMTony Lindgren
Patch from Tony Lindgren Update OMAP PM code from linux-omap tree: - Move PM code from plat-omap to mach-omap1 and mach-omap2 by Tony Lindgren - Add minimal PM support for omap24xx by Tony Lindgren and Richard Woodruff - Misc updates to omap1 PM code by Tuukka Tikkanen et al - Updates to the SRAM code needed for PM and FB by Imre Deak Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3279/1: OMAP: 1/3 Fix low-level io initTony Lindgren
Patch from Tony Lindgren This patch adds the missing cache flushes to common low-level init that are needed to access the IO region. These flushes are normally done at the end of devicemaps_init(), but we need to detect the OMAP core type early. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3142/1: OMAP 2/5: Update files common to omap1 and omap2Tony Lindgren
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Serial port and framebuffer init improvments by Imre Deak - Common omap pin mux framework by Tony Lindgren - Common omap clock framework by Tony Lindren Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 2987/1: Replace map_desc.physical with map_desc.pfn: OMAPDeepak Saxena
Patch from Deepak Saxena OMAP map_desc.pfn conversion Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07[ARM] 2887/1: OMAP 2/4: Update files common to omap1 and omap2, take 2Tony Lindgren
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Clock updates by Tuukka Tikkanen, Juha Yrjola, Daniel Petrini and Tony Lindgren - DMA fixes by Imre Deak, Juha Yrjola and Daniel Petrini - Add support to dual-mode hardware timers by Lauri Leukkunen - GPIO support for 24xx by Paul Mundt - GPIO wake-up support by Tony Lindgren - Better GPIO interrupt handler to not lose interrupts by Ralph Walden and Ladislav Michl - Power Management updates by Tuukka Tikkanen - Make Power Management code use new SRAM functions by Tony Lindgren Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>