aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap
AgeCommit message (Collapse)Author
2009-08-28OMAP3: MMC: Add mux for pinsVikram Pandita
For OMAP3 add MMC1 MMC2 pin mux MMC3 mux is not added as there are multiple configurations possible, so the muxing is left to be done in board file. Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Signed-off-by: Chikkature Rajashekar <madhu.cr@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: iommu: add initial debugfs supportHiroshi DOYU
This enables to peek the following data. $ /debug/iommu/isp# ls mem nr_tlb_entries regs mmap pagetable tlb $ /debug/iommu/isp# head pagetable L: da: pa: ----------------------------------------- 2: 00001000 8ae4a002 2: 00002000 8e7bb002 2: 00003000 8ae49002 2: 00004000 8ae65002 ..... Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: iommu: fix wrong argument in flush_cache_vmap()Hiroshi DOYU
The second argument should be the end address, not the length. Actually there will not be any effect on the behavior of this driver since flush_cache_vmap() calls flush_cache_all() in the end. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: GPIO: Avoid generating extra IRQsEero Nurkkala
It is possible for GPIO IRQ lines configured with falling edge triggering only to get IRQs at the rising edge upon the exit of offmode. And vice versa. Prevent such IRQs to arrive by generating the IRQ obeying the detection scheme. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: Remove omap boot parsing codeRoger Quadros
Remove left over code for parsing omap boot tags. This is no longer used. see commit fc0ef1bfa1353e048e055374a09c75320d22231b Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: UART: drop OMAP_TAG_UART, enable all UARTs, auto-disabled on idleKalle Valo
OMAP tags are deprecrated so drop them. Drop UART config data which decides which UARTs to enable during boot. This is no longer necessary since serial core code disables clocks after inactivity. Background: with new UART idle code, all on-chip UARTs are idled using a configurable inactivity timer (default 5 seconds.) After the inactivity timer, UART clocks are disabled automatically. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: remove OMAP_TAG_SERIAL_CONSOLEKalle Valo
Omap tags are deprecated and remove OMAP_TAG_SERIAL_CONSOLE. Console must be enabled with the console boot parameter instead. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: Remove ifdefs for io.hTony Lindgren
Remove ifdefs for io.h Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASETony Lindgren
Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-28OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS insteadTony Lindgren
Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS, and convert omap_read/write into a functions instead of a macros. Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE. In the long run, most code should use ioremap + __raw_read/write instead. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-25ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stopJarkko Nikula
Functionality of functions omap_mcbsp_xmit_enable and omap_mcbsp_recv_enable can be merged into omap_mcbsp_start and omap_mcbsp_stop since API of those omap_mcbsp_start and omap_mcbsp_stop was changed recently allowing to start and stop individually the transmitter and receiver. This cleans up the code in arch/arm/plat-omap/mcbsp.c and in sound/soc/omap/omap-mcbsp.c which was the only user for those removed functions. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-25OMAP: McBSP: Use textual values in DMA operating mode sysfs filesJarkko Nikula
Use more descriptive than numerical value when showing and storing the McBSP DMA operating mode. Show function is using similar syntax than e.g. the led triggers so that all possible values for store function are printed but with current value surrounded with square brackets. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-24ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510Janusz Krzysztofik
Implement DMA channel self linking on OMAP1510 using AUTO_INIT and REPEAT flags of the DMA CCR register. Created against linux-2.6.31-rc5. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Let element DMA mode hit retention alsoEero Nurkkala
The device no longer hits retention if element DMA mode is taken for at least the duration of the serial console timeout. Force element DMA mode to shut down through smartidle. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Do not enable wakeups for no-idle modeEero Nurkkala
When no-idle mode is taken, wakeups need not to be enabled. Moreover, CLOCKACTIVITY bits are unnecessary with this mode also. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Configure NO IDLE mode for DMA mode different of thresholdEduardo Valentin
Use dma mode property to configure NO IDLE or SMART IDLE of McBSPs. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Retain McBSP FCLK clockactivityEero Nurkkala
FCLK may get autogated so that it prevents the McBSP to work properly. It is the bit 9 that must be set for maintaining the McBSP FCLK. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Change wakeup signalsEduardo Valentin
Configure only XRDYEN and RRDYEN wakeup signals in order to get better power consumption. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Wakeups utilizedEero Nurkkala
This patch enables the smart idle mode while McBPS is being utilized. Once it's done, force idle mode is taken instead. Apart of it, it also configures what signals will wake mcbsp up. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Add link DMA mode selectionPeter Ujfalusi
It adds a new sysfs file, where the user can configure the mcbsp mode to use. If the mcbsp channel is in use, it does not allow the change. Than in omap_pcm_open we can call the omap_mcbsp_get_opmode to get the mode, store it, than use it to implement the different modes. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Rename thres sysfs symbolsEduardo Valentin
This patch renames the symbols that handles threshold sysfs properties. This way we can add more sysfs properties to them. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Create and export max_(r|t)x_thres propertyEduardo Valentin
This patch export through sysfs two properties to configure maximum threshold for transmission and reception on each mcbsp instance. Also, it exports two helper functions to allow mcbsp users to read this values. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Add transmit/receive threshold handlerEduardo Valentin
This patch adds a way to handle transmit/receive threshold. It export to mcbsp users a callback registration procedure. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Use appropriate value for startup delayEduardo Valentin
Increasing startup delay value as worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec Although, 100us may give enough time for two CLKSRG, due to some unknown PM related, clock gating etc. reason, this patch increases it to 500us. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Add IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1 registers.Eduardo Valentin
Adding McBSP register definition for IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1 registers. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20OMAP: McBSP: Provide functions for ASoC frame syncronizationEero Nurkkala
ASoC has an annoying bug letting either L or R channel to be played on L channel. In other words, L and R channels can switch at random. This provides McBSP funtionality that may be used to fix this feature. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-18Merge branch 'master' into for-linusRafael J. Wysocki
2009-08-15timekeeping: Move NTP adjusted clock multiplier to struct timekeeperMartin Schwidefsky
The clocksource structure has two multipliers, the unmodified multiplier clock->mult_orig and the NTP corrected multiplier clock->mult. The NTP multiplier is misplaced in the struct clocksource, this is private information of the timekeeping code. Add the mult field to the struct timekeeper to contain the NTP corrected value, keep the unmodifed multiplier in clock->mult and remove clock->mult_orig. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Daniel Walker <dwalker@fifo99.com> LKML-Reference: <20090814134810.149047645@de.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-10Merge branch 'pm-upstream/fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm
2009-08-10Merge branch 'omap_fixes_31' of git://git.pwsan.com/linux-2.6Russell King
2009-08-10OMAP3: Fix omap3 sram virtual addres overlap vmalloc space after increasing ↵Janboe Ye
vmalloc size commit e85c205ac1427f2405021a36f083280ff0d0a35e increase vmalloc size. vmalloc space will overlap with OMAP3 sram virtual address. Signed-off-by: Li Hong Mei <hong-mei.li@motorola.com> Signed-off-by: Janboe Ye <yuan-bo.ye@motorola.com> Reviewed-by: Paul Walmsley <paul@pwsan.com>
2009-08-10OMAP2/3: DMA errata correctionVikram Pandita
This errata is valid for: OMAP2420 Errata 1.85 Impacts all 2420 ES rev OMAP2430 Errata 1.10 Impacts only ES1.0 Description: DMA may hang when several channels are used in parallel OMAP3430: Not impacted, so remove the errata fix for omap3 Fixed issue reported on cpu_is_omap24xx check reported by Nishant Kamat Signed-off-by: Vikram Pandita <vikram.pandita@ti.com> Reviewed-by: Nishant Kamat <nskamat@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-10OMAP: Fix testing of cpu defines for mach-omap1Tony Lindgren
There's no need to keep these defines limited in the ifdef block for mach-omap2. It will just cause problems testing for the CPU revision in the common code, like the next patch does for the DMA errata. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-08-07ARM: OMAP: McBSP: Fix ASoC on OMAP1510 by fixing API of omap_mcbsp_start/stopJarkko Nikula
Simultaneous audio playback and capture on OMAP1510 can cause that second stream is stalled if there is enough delay between startup of the audio streams. Current implementation of the omap_mcbsp_start is starting both transmitter and receiver at the same time and it is called only for firstly started audio stream from the OMAP McBSP based ASoC DAI driver. Since DMA request lines on OMAP1510 are edge sensitive, the DMA request is missed if there is no DMA transfer set up at that time when the first word after McBSP startup is transmitted. The problem hasn't noted before since later OMAPs are using level sensitive DMA request lines. Fix the problem by changing API of omap_mcbsp_start and omap_mcbsp_stop by allowing to start and stop individually McBSP transmitter and receiver logics. Then call those functions individually for both audio playback and capture streams. This ensures that DMA transfer is setup before transmitter or receiver is started. Thanks to Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> for detailed problem analysis and Peter Ujfalusi <peter.ujfalusi@nokia.com> for info about DMA request line behavior differences between the OMAP generations. Reported-and-tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-05Merge branch 'pm-upstream/fixes' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-stable
2009-08-05OMAP: GPIO: clear/restore level/edge detect settings on mask/unmaskKevin Hilman
If IRQ triggering is enabled, it can trigger a pending interrupt even for masked interrupts. Any pending GPIO interrupts can prevent the powerdomain from hitting retention. Problem found, reported and additional review and testing by Chunquiu Wang. Tested-by: Chunquiu Wang <cqwang@motorola.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP: PM: CPUfreq: obey min/max settings of policyEero Nurkkala
Use the min/max settings from CPUfreq policy rather than processor defined min/max settings. Without this patch, it's possible to scale frequency outside the current policy range. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP3: Fixed crash bug with serial + suspendTero Kristo
It was possible for an unhandled interrupt to occur if there was incoming serial traffic during wakeup from suspend. This was caused by the code in arch-arm/mach-omap2/serial.c keeping interrupt enabled all the time, but not acking its interrupts. Applies on top of PM branch. Use the PM begin/end hooks to ensure that the "serial idle" interrupts are disabled during the suspend path. Also, since begin/end hooks are now used, use the suspend_state that is passed in the begin hook instead of the enter hook as per the platform_suspend_ops docs. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-08-05OMAP: GPIO: Fix incorrect gpio_get logic for output GPIOsRoger Quadros
gpio_get() should return DATAIN register value when the GPIO is configured as input whereas it should return DATAOUT register value when the GPIO is configured as output. Now /sys/kernel/debug/gpio shows proper values for output GPIOs Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-07-28ARM: OMAP4: Update the GPIO supportSyed Rafiuddin
This patch adds GPIO support on OMAP4430 development platform. Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
2009-07-28ARM: OMAP4: Add McBSP supportSyed Rafiuddin
This patch creates McBSP support on OMAP4430 development platform. This patch includes corresponding base address changes for OMAP4. Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
2009-07-24OMAP2/3 clock: split, rename omap2_wait_clock_ready()Paul Walmsley
Some OMAP2/3 hardware modules have CM_IDLEST attributes that are not handled by the current omap2_wait_clock_ready() code. In preparation for patches that fix the unusual devices, rename the function omap2_wait_clock_ready() to omap2_wait_module_ready() and split it into three parts: 1. A clkops-specific companion clock return function (by default, omap2_clk_dflt_find_companion()) 2. A clkops-specific CM_IDLEST register address and bit shift return function (by default, omap2_clk_dflt_find_idlest()) 3. Code to wait for the CM to indicate that the module is ready (omap2_cm_wait_idlest()) Clocks can now specify their own custom find_companion() and find_idlest() functions; used in subsequent patches. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-07-24OMAP3: Setup MUX settings for SDRC CKE signalsJean Pihet
This patches ensures the MUX settings are correct for the SDRC CKE signals to SDRAM. This allows the self-refresh to work when 2 chip-selects are in use. A warning is thrown away in case the initial muxing is incorrect, in order to track faulty or old-dated bootloaders. Note: The CONFIG_OMAP_MUX and CONFIG_OMAP_MUX_WARNINGS options must be enabled for the mux code to have effect. Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-07-24OMAP3 SDRC: add support for 2 SDRAM chip selectsJean Pihet
Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2 SDRAM parts connected to the SDRC. This patch adds the following: - add a new argument of type omap_sdrc_params struct* to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params - adapted the OMAP boards files to the new prototype of omap2_init_common_hw - add the SDRC 2nd CS registers offsets defines - adapt the sram sleep code to configure the SDRC for the 2nd CS Note: If the 2nd param to omap2_init_common_hw is NULL, then the parameters are not programmed into the SDRC CS1 registers Tested on 3430 SDP and Beagleboard rev C2 and B5, with suspend/resume and frequency changes (cpufreq). Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2009-07-24OMAP4: sDMA: Update the request lines and new registers.Santosh Shilimkar
This patch updates the platform dma.h with new dma request lines for OMAP4 peripherals. Also additional hardware register of OMAP4 sDMA module are included. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-07-22ARM: Rework omap suspend_late()/resume_early()Magnus Damm
This patch reworks platform driver power management code for omap drivers using late/early legacy callbacks. The callbacks are converted for CONFIG_SUSPEND like this: suspend_late() -> suspend_noirq() resume_early() -> resume_noirq() Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-06-23OMAP: Fix IOMEM macro for assemblyTony Lindgren
Otherwise IOMEM calculations can fail. Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-06-23OMAP2/3: Initialize gpio debounce registerjanboe
Some bootloader may initialize debounce register and this will make dbclk not consist with the debounce register after linux kernel boot up. Signed-off-by: janboe <janboe.ye@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-06-23OMAP: IOMMU: function flush_iotlb_page is not flushing correct entryFernando Guzman Lugo
The function flush_iotlb_page is not loading the CAM register with the correct entry to be flushed, so it is flushing other entry Signed-off-by: Fernando Guzman Lugo <x0095840@ti.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-06-23OMAP3: DMA: Enable idlemodes for DMA OCPKalle Jokiniemi
This patch enables MStandby smart-idle mode, autoidle smartidle mode, and the autoidle bit for DMA4_OCP_SYSCONFIG. Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kevin Hilman <khilman@ti.deeprootsystems.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-30 13:47:48 +0000