aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap
AgeCommit message (Collapse)Author
2006-10-06Initial blind fixup for arm for irq changesLinus Torvalds
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03fix file specification in commentsUwe Zeisberger
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-09-28Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (130 commits) [ARM] 3856/1: Add clocksource for Intel IXP4xx platforms [ARM] 3855/1: Add generic time support [ARM] 3873/1: S3C24XX: Add irq_chip names [ARM] 3872/1: S3C24XX: Apply consistant tabbing to irq_chips [ARM] 3871/1: S3C24XX: Fix ordering of EINT4..23 [ARM] nommu: confirms the CR_V bit in nommu mode [ARM] nommu: abort handler fixup for !CPU_CP15_MMU cores. [ARM] 3870/1: AT91: Start removing static memory mappings [ARM] 3869/1: AT91: NAND support for DK and KB9202 boards [ARM] 3868/1: AT91 hardware header update [ARM] 3867/1: AT91 GPIO update [ARM] 3866/1: AT91 clock update [ARM] 3865/1: AT91RM9200 header updates [ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series [ARM] kthread: switch arch/arm/kernel/apm.c [ARM] Off-by-one in arch/arm/common/icst* [ARM] 3864/1: Refactore sharpsl_pm [ARM] 3863/1: Add Locomo SPI Device [ARM] 3847/2: Convert LOMOMO to use struct device for GPIOs [ARM] Use CPU_CACHE_* where possible in asm/cacheflush.h ...
2006-09-27USB: move <linux/usb_otg.h> to <linux/usb/otg.h>David Brownell
Move <linux/usb_otg.h> to <linux/usb/otg.h>. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-09-25ARM: OMAP: Remove common pm.cTony Lindgren
There is now separate pm.c for OMAP1 and OMAP2. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Sync clocks with linux-omap treeTony Lindgren
Mostly clean up CONFIG_OMAP_RESET_CLOCKS. Also includes a patch from Imre Deak to make McSPI clocks use id. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25[PATCH] ARM: OMAP: Check gpio_fck not gpio_ickKomal Shah
Check gpio_fck not gpio_ick. Signed-off-by: Komal Shah <komal_shah802003@yahoo.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Sync DMA with linux-omap treeTony Lindgren
This patch syncs OMAP DMA code with linux-omap tree. Mostly allow changing DMA callback function and set OMAP2 specific transfer mode. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Add sanity check to clk_disableJuha Yrjola
BUG() if the clock use count is already zero. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: GPIO: IRQSTATUS2 workaround for retention stateHiroshi DOYU
In OMAP2420, an incoming GPIO interrupt always sets both GPIO_IRQSTATUS1 and GPIO_IRQSTATUS2, even if the relevant bit is disabled in GPIO_IRQENABLE1/2 and DSP doesn't use GPIO at all. GPIO_IRQSTATUS1 is for MPU and GPIO_IRQSTATUS2 is for DSP. If IRQSTATUS is set, this will prevent the system from going to idle state. This patch also clears IRQSTATUS2 to avoid the above situation. Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Fix typo for 24xx GPIO resumeTony Lindgren
Fix typo for 24xx GPIO resume Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: OMAP2 dmtimer power management supportJuha Yrjola
GPT1 will be set into non-posted mode, and the wakeup register is set for all timers. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Add enable/disable functions for dmtimerTimo Teras
Add enable/disable functions which effectively control the GPT iclk and fclk. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Remove Remove superfluous/recursive locking for GPIODavid Brownell
Remove Remove superfluous/recursive locking for GPIO Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Fix spinlock recursion for dyntickTony Lindgren
Fix spinlock recursion for dyntick. Modified version based on Imre Deak's earlier patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Reset GPIO irq state after free_irq()Tony Lindgren
This is needed to reset GPIO after free_irq(). Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Use GPT iclk only when neededTimo Teras
This patch makes the OMAP2 dmtimers module using the interface clocks only while the registers are accessed (except GPT1 which has iclk enabled all the time). Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: DMA source and destination addresses are unsignedTony Lindgren
Also export some omap24xx specific DMA functions. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Fix OMAP1 compilation after MPUIO check changeJonathan McDowell
The recent MPUIO range change fix breaks compilation if CONFIG_ARCH_OMAP24XX isn't defined; it should be OMAP_MAX_GPIO_LINES not MAX_GPIO_LINES I believe. This one liner fixes it. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Sleep is prevented when no LCD is attachedImre Deak
We have to make sure that the LCD DMA external destination bit is cleared by default, otherwise OMAP won't sleep. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: GPIO: fix MPUIO checkImre Deak
- MPUIO doesn't exist on OMAP2 - no error was returned for too big MPUIO numbers Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Remove sys_ck and sys_clkout from McBSP for 24xxTony Lindgren
McBSP does not need sys_ck or sys_clkout. If the devices connected to McBSP need sys_clkout, they need to request it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Apollon MMC supportKyungmin Park
Apollon board MMC supports on OMAP2 TODO: We have to check MMC on H4 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: 2420 boot BUG(): failure to map SRAMKevin Hilman
ARM: OMAP: Fix SRAM static mapping for EMU devices. Fix SRAM static mapping for EMU devices. Signed-off-by: Kevin Hilman <khilman@deeprooted.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: timer32k: fix tick count calculation when reprogrammingImre Deak
Reprogramming takes places before putting the CPU into idle mode if the dynamic tick option is enabled. The timer is then set to expire at the next pending timer event. Because some time has already passed since the last reported jiffy we have to wait less than the time specified in jiffies. Also make sure we don't set a load value of 0 whose outcome is unspecified according to the TRM. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-08-01[ARM] 3739/1: genirq updates: irq_chip, add and use irq_chip.nameDavid Brownell
Patch from David Brownell ARM genirq cleanups/updates: - Start switching platforms to newer APIs * use "irq_chip" name, not "irqchip" * providing irq_chip.name - Show irq_chip.name in /proc/interrupts, like on x86. This update a bit more than half of the ARM code. The irq_chip.name values were chosen to match docs (if I have them) or be otherwise obvious ("FPGA", "CPLD", or matching the code). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-02[PATCH] genirq: Fixup ARM devel mergeThomas Gleixner
ARM devel merge introduced new machine functionality which was not covered by the ARM -> genirq patches. Fix it up and make it compile again. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02[PATCH] ARM: fixup irqflags breakage after ARM genirq mergeThomas Gleixner
The irgflags consolidation did conflict with the ARM to generic IRQ conversion and was not applied for ARM. Fix it up. Use the new IRQF_ constants and remove the SA_INTERRUPT define Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02Merge branch 'genirq' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits) [ARM] 3683/2: ARM: Convert at91rm9200 to generic irq handling [ARM] 3682/2: ARM: Convert ixp4xx to generic irq handling [ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling [ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling [ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling [ARM] 3698/1: ARM: Convert sa1100 to generic irq handling [ARM] 3697/1: ARM: Convert shark to generic irq handling [ARM] 3696/1: ARM: Convert clps711x to generic irq handling [ARM] 3694/1: ARM: Convert ecard driver to generic irq handling [ARM] 3693/1: ARM: Convert omap1 to generic irq handling [ARM] 3691/1: ARM: Convert imx to generic irq handling [ARM] 3688/1: ARM: Convert clps7500 to generic irq handling [ARM] 3687/1: ARM: Convert integrator to generic irq handling [ARM] 3685/1: ARM: Convert pxa to generic irq handling [ARM] 3684/1: ARM: Convert l7200 to generic irq handling [ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling [ARM] 3680/1: ARM: Convert footbridge to generic irq handling [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes ... Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless code).
2006-07-02Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 3541/2: workaround for PXA27x erratum E7 [ARM] nommu: provide a way for correct control register value selection [ARM] 3705/1: add supersection support to ioremap() [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency [ARM] 3703/1: Add help description for ARCH_EP80219 [ARM] 3678/1: MMC: Make OMAP MMC work [ARM] 3677/1: OMAP: Update H2 defconfig [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1 [ARM] Add section support to ioremap [ARM] Fix sa11x0 SDRAM selection [ARM] Set bit 4 on section mappings correctly depending on CPU [ARM] 3666/1: TRIZEPS4 [1/5] core ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE ARM: OMAP: Update dmtimers ARM: OMAP: Make clock variables static ARM: OMAP: Fix GPMC compilation when DEBUG is defined ARM: OMAP: Mux updates for external DMA and GPIO ...
2006-07-01[ARM] 3701/1: ARM: Convert plat-omap to generic irq handlingThomas Gleixner
Patch from Thomas Gleixner From: Thomas Gleixner <tglx@linutronix.de> Fixup the conversion to generic irq subsystem. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01[ARM] 3678/1: MMC: Make OMAP MMC workTony Lindgren
Patch from Tony Lindgren This patch makes OMAP MMC work again: - Fix compile errors - Do not ioremap base as it is already statically mapped - Clean-up platform device handling - Fix compile warnings Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01[ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1Tony Lindgren
Patch from Tony Lindgren Fixes compilation errors on OMAP1. Patch from Timo Teras. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICETony Lindgren
MT_MEMORY is needed in order to execute code in SRAM. Also need to use section mapping. Based on a patch by Richard Woodruff. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Update dmtimersTimo Teras
- Initialize timer outside of spinlock to reduce the time the spinlock is held - Do clk_get to the source clocks during initialization to avoid sleeping later - New function to set counter register Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Make clock variables staticJuha Yrjola
Since the mutex protecting the clock list is static, the list itself should be too. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Update cpufreq support for 24xxTony Lindgren
Update cpufreq support for 24xx Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Fix DMA channel irq handling for omap24xxTony Lindgren
- DMA CSR register is cleared by reading on omap1, but on omap2 it is cleard by writing to it. - DMA TOUT interrupt does not exist on omap24xx, rename it - Add SECURE and MISALIGNED errors by default for omap24xx - Add defines for external DMA request lines Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: OMAP2 DMA burst supportKyungmin Park
OMAP2 DMA burst setting support Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Fix 32 kHz timer and modify GP timer to use GPT1Timo Teras
The dmtimer framework update broke 32 kHz timer as udelay() does not work before system timer is started (and GPT1 should not be reset). This also makes the GP timer use GPT1. This requires a fix in clock framework. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Port dmtimers to OMAP2 and implement PWM supportTimo Teras
Port dmtimer framework to OMAP2. Modify the dmtimers API to support setting of PWM configuration and prescaler. Convert 32 kHz timer and GP timer to use the dmtimer framework. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Fix GPIO IRQ mask handlingImre Deak
The GPIO IRQ mask was retrieved incorrectly in cases where we have a mask register instead of an enable register. Also we should only return the valid bits depending on the bank size. This fixes a bug on 1510/1610 based OMAPs where GPIO IRQs are not delivered. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: DMA transfer parameter configuration fixPeter Ujfalusi
Fix for re-using OMAP DMA channel with different transfer parameters. Bits in the CCR register need to be cleaned as well in some cases. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Add core fsample supportBrian Swetland
This patch adds core support for the TI F-Sample Board (OMAP 850). Signed-off-by: Brian Swetland <swetland@google.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: GPIO IRQ lazy IRQ disable fixImre Deak
- The current OMAP GPIO IRQ framework doesn't use the do_edge_IRQ, do_level_IRQ handlers, but instead calls do_simple_IRQ. This doesn't handle disabled interrupts properly, so drivers will still get interrupts after calling disable_irq. The patch solves this by respecting the irq_desc.disable_depth and irq_desc.running counters. When one of these is non-zero the handler is not called, the interrupt is masked and marked as pending. The pending interrupt will be serviced when the running handler returns. This is according to the same semantics as the standard do_edge_IRQ and do_level_IRQ handlers have, so one day we should use them instead of do_simple_IRQ. - Process only interrupts that are not masked. The ISR may contain pending interrupts that are masked these shouldn't be processed. - Move the bank IRQ unmasking out of the IRQ dispatch loop. If there are further iterations we shouldn't unmask it if there are level triggered interrupts pending. Signed-off-by: Imre Deak <imre.deak@nokia.com> Signed-off-by: Juha Yrjola <juha.yrjola@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-22[ARM] 3616/1: fix timer handler wrap logic for a number of platformsLennert Buytenhek
Patch from Lennert Buytenhek A couple of platforms aren't using the right comparison type in their timer interrupt handlers (as we're comparing two wrapping timestamps, we need a bmi/bpl-type comparison, not an unsigned comparison) -- this patch fixes them up. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-09[ARM] 3461/1: ARM: OMAP: Fix clk_get() when using id and nameTony Lindgren
Patch from Tony Lindgren Recent change to use both id and name when available was not necessarily returning the right clock as it also searched for clock name afterwards. This caused MMC to break on H2 and H3 boards. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-09[ARM] 3460/1: ARM: OMAP: Remove unnecessary nop_release()Tony Lindgren
Patch from Tony Lindgren Remove unnecessary omap_nop_release() as noted by RMK. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3433/1: ARM: OMAP: 8/8 Update board filesTony Lindgren
Patch from Tony Lindgren This patch syncs OMAP board support with linux-omap tree. The highlights of the patch are: - Add support for Nokia 770 by Juha Yrjola - Add support for Samsung Apollon by Kyungmin Park - Add support for Amstrad E3 videophone by Jonathan McDowell - Remove board-netstar.c board support as requested by Ladislav Michl - Do platform_device registration in board files by Komal Shah et al. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>